summaryrefslogtreecommitdiff
path: root/sys/dev/ic/malo.c
AgeCommit message (Expand)Author
2006-11-26It's sizeof(struct ieee80211_frame) not sizeof(struct ieee80211_frame *).Marcus Glocker
2006-11-26do not have each net80211 driver define its own rates structures. if they useTheo de Raadt
2006-11-25Cleanup obsolete rate bits and pass right value to the TX rate descriptor.Marcus Glocker
2006-11-25If no TX rate has been calculated yet, set rate value to autoselectMarcus Glocker
2006-11-24Small KNF fix.Marcus Glocker
2006-11-24Enable setting of fixed rates.Marcus Glocker
2006-11-24Enable automatic rate adapation (done by firmware and hardware).Marcus Glocker
2006-11-23Remove 802.11a stuff. There is one RF chip (88W8030) which supports 5GHz,Marcus Glocker
2006-11-23The duration field is calculated by the firmware. Remove malo_txtime()Marcus Glocker
2006-11-22Remove rssadapt(9) bits; Firmware supports rate adaption. Also,Marcus Glocker
2006-11-21Free allocated mbufs at TX done. While there also reset some TX descriptorMarcus Glocker
2006-11-16Drop malo_reset() for now and do ENETRESET and media changes usingMarcus Glocker
2006-11-16Minor cleanup; reactivate malo_cmd_reset() which seems to work now, removeMarcus Glocker
2006-11-15Quiet down debug output by default. Improve cmd response/result handling.Marcus Glocker
2006-11-15Enable data packet transmission.Marcus Glocker
2006-11-15Fix the loop in malo_tx_intr(). This fixes a infinit loop that happend afterClaudio Jeker
2006-11-12In malo_send_cmd_dma() reduce the poll loop to 10 and increase the delayClaudio Jeker
2006-11-12Rewrite part of malo_tx_mgt() to do the mbuf dance in a nicer way. ThisClaudio Jeker
2006-11-12Simplify code and remove a delay() by actually waiting for the command toClaudio Jeker
2006-11-10Fix DMA firmware command interface (poll for command response), and get theMarcus Glocker
2006-11-09Fix a bug in the firmware command function and check if the main firmwareMarcus Glocker
2006-11-07Add TX done cleanup.Marcus Glocker
2006-11-06Also reset the TX ring if the card gets stopped.Marcus Glocker
2006-11-06Enable TX of management frames. Fix/add firmware commands, add more debugMarcus Glocker
2006-10-29Reorganize malo_intr() a bit. Check for unhandled interrupt flags andClaudio Jeker
2006-10-29In malo_ioctl() if the returned error is ENETRESET reset the device.Claudio Jeker
2006-10-29MALO_CMD_RESPONSE is acting just as a flag so move it to the end of the list.Claudio Jeker
2006-10-29Fix some nasty bugs in malo_reset() and malo_cmd_set_channel() and simplifyClaudio Jeker
2006-10-29Add first TX path and active scan bits. Don't expect to much yet.Marcus Glocker
2006-10-25Resort some functions, tiny cleanup.Marcus Glocker
2006-10-24Fix RX DMA handling; until now the card stopped receiving interruptsMarcus Glocker
2006-10-22Activate RX radiotap. We have RSSI for now.Marcus Glocker
2006-10-21Fix RX handling; the chip injects control data in front and betweenMarcus Glocker
2006-10-17Add first bits of a RX intr handler routine. Needs further clarification.Marcus Glocker
2006-10-17Allocate and free TX DMA rings additionally change some of the structures toClaudio Jeker
2006-10-17Allocate and free RX DMA ring. Mostly form rt2661.c with adaption for malo.Claudio Jeker
2006-10-15Place bus_dmamap_sync() around malo_send_cmd this should help porting toClaudio Jeker
2006-10-15More serious firmware load error messages.Marcus Glocker
2006-10-15Add $OpenBSD$ tagClaudio Jeker
2006-10-15First stubs for a new driver for the Marvell Libertas chips.Claudio Jeker