summaryrefslogtreecommitdiff
path: root/sys/dev/ic
AgeCommit message (Expand)Author
2016-07-26Fix byteswap errors in rtwn(4) and urtwn(4) introduced by me on June 17.Stefan Sperling
2016-07-13remove unused function ether_cmp()Theo de Raadt
2016-06-17Merge a lot of code from urtwn(4) into rtwn(4). Both drivers now share codeStefan Sperling
2016-06-05Continue preparing a future merge of urtwn(4) and rtwn(4).Stefan Sperling
2016-05-20check we allocated the cq, not the sq, after trying to allocate the cqDavid Gwynne
2016-05-10make qla_iocb_seg structs 4 byte aligned and use htolem32 to set it.David Gwynne
2016-05-06Make sure we always update both bits that control the bus width. Also makeMark Kettenis
2016-05-06Round the requested clock frequency down to a support value instead ofMark Kettenis
2016-05-06Fix the DMA transfer code to repect the block size in the sdmmc command.Mark Kettenis
2016-05-05Add Dual Data Rate support for eMMC at 52MHz.Mark Kettenis
2016-05-04Use BUS_DMA_OVERRUN to cope with the broken DMA engine of the Davicom DM9102Mark Kettenis
2016-05-01Add support for changing the bus width to the sdmmc subsystem and the sdhc(4)Mark Kettenis
2016-04-20If RTL8111E on PC Engines APU is detected, configure NIC LEDs to display link.Stuart Henderson
2016-04-18allocate an array of entries, not pointers for the queuesDavid Gwynne
2016-04-14shorten the io path slightlyDavid Gwynne
2016-04-14apparently it's spelled NVMe, not NVMEDavid Gwynne
2016-04-14provide a shutdown hook that follows the procedure in the docsDavid Gwynne
2016-04-14implement translation of scsi SYNC CACHE to nvme FLUSHDavid Gwynne
2016-04-14bump openings to 64 to match the number of ccbs.David Gwynne
2016-04-14if io needs more than two prpe slots, overflow into the ccb prplDavid Gwynne
2016-04-14reallocate the ccbs after we figure out how big the sgls can beDavid Gwynne
2016-04-14set the scsi status to SCSI_OKDavid Gwynne
2016-04-14allocate dma memory for ccbs to use as prpe listsDavid Gwynne
2016-04-14dont attach if the min nvme page size is bigger than the cpu page sizeDavid Gwynne
2016-04-14dont complete scsi writes twiceDavid Gwynne
2016-04-14WAITOK for the dmamap create for ccbs tooDavid Gwynne
2016-04-14cut the memory for io buffers up into page sized chunksDavid Gwynne
2016-04-14check both the admin and io queue for completions in the interrupt handlerDavid Gwynne
2016-04-14dont put names in arguments.David Gwynne
2016-04-14tabs, not spacesDavid Gwynne
2016-04-13implement handling of scsi reads and writesDavid Gwynne
2016-04-13enable interrupts before attaching the scsibusDavid Gwynne
2016-04-13allocate a queue for io commands and tell the chip about it.David Gwynne
2016-04-13nvme_q_create() issues the commands to tell the chip about io queuesDavid Gwynne
2016-04-13stub out handling of TEST_UNIT_READY, PREVENT_ALLOW, and START_STOPDavid Gwynne
2016-04-13implement handling of scsi read capacity commandsDavid Gwynne
2016-04-13implement basic scsi inquiry handlingDavid Gwynne
2016-04-13provide variants of the sqe struct for q creation and io operationsDavid Gwynne
2016-04-13implement the guts of the scsi probe and free functionDavid Gwynne
2016-04-13implement the namespace identify structureDavid Gwynne
2016-04-13the io command setDavid Gwynne
2016-04-13wire up the scsi midlayer. scsibus should appear after this.David Gwynne
2016-04-13allocate an array of things to hold info about namespacesDavid Gwynne
2016-04-13stash the controller identify and number of namespaces in the softc.David Gwynne
2016-04-13make a place for q_id to goDavid Gwynne
2016-04-13provide an scsi_adapter and stub functions for emulation to sit inDavid Gwynne
2016-04-13nvme_sqe_fill will post a copy of an sqe from a callerDavid Gwynne
2016-04-13poll for command completion on the cqe itll be of calling nvme_intrDavid Gwynne
2016-04-13make nvme_poll return the flags from the completion queue entryDavid Gwynne
2016-04-13keep track of the queue id in nvme_queue.David Gwynne
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-23 04:05:46 +0000