summaryrefslogtreecommitdiff
path: root/sys/dev/ic
AgeCommit message (Expand)Author
2011-04-27kill a !__NetBSD__ ifdef which just confusesTheo de Raadt
2011-04-27if getting the RAID header fails, dont stop the midlayer from trying toDavid Gwynne
2011-04-27configure fc controllers to fail io as fast as possible when cables areDavid Gwynne
2011-04-27return XS_RESET to the midlayer if the command was killed for some reasonDavid Gwynne
2011-04-27rework the scanning of fibre channel ports to match how linux does it.David Gwynne
2011-04-27No need to splbio/splx in the interrupt routine. It's alreadyKenneth R Westerback
2011-04-26No point in a per-attachment scsi_adapter; move to global dpt_switchMatthew Dempsky
2011-04-26A plausible attempt at iopoolifying dpt(4).Matthew Dempsky
2011-04-26Make dpt(4) compile on 64-bit arches; no binary change on i386.Matthew Dempsky
2011-04-26Get rid of NetBSD/OpenBSD ifdefs; our SCSI stacks have diverged tooMatthew Dempsky
2011-04-26Iopoolification. Installed snapshot over it and it even booted.Kenneth R Westerback
2011-04-21A plausible iopoolification. Utter dearth of interested partiesKenneth R Westerback
2011-04-19Iopoolification. Much simpler version than the one revived at k2k11.Kenneth R Westerback
2011-04-19Fix potential null dereference.Charles Longeau
2011-04-19Cease to pretend RAW SCSI mode exists. Eradicate all traces.Kenneth R Westerback
2011-04-18keep an eye out for wdc registers returning 0xff. if they return 0xff,Theo de Raadt
2011-04-17Add wol support to xl(4). Not really tested, but hopefully someone willStefan Sperling
2011-04-17Don't increase if_oerrors for every multicast frame leaving the interface.Stefan Sperling
2011-04-16Initialize variables before use.Kenneth R Westerback
2011-04-15Change wdc_reset_channel() to take a `no wait' argument. Pass in turn thisMiod Vallat
2011-04-14Add several additional adapter types and correct definition ofJonathan Gray
2011-04-11Fix SPL handling when PCDISPLAY_SOFTCURSOR is enabled.Matthew Dempsky
2011-04-09add all 64 bit dma plumbing but stick with 32 for now by default.Marco Peereboom
2011-04-09make sure the upper 32 bits are always written to instead of assuming itMarco Peereboom
2011-04-08more spacesMarco Peereboom
2011-04-08kill some stray spacesMarco Peereboom
2011-04-08rename wiat channel to something less than 8 chars.Marco Peereboom
2011-04-08use dma_alloc for transient management commands.Marco Peereboom
2011-04-07Do not use NULL in integer comparisons. No functional change.Miod Vallat
2011-04-07Make sure the eeprom pointer is correctly initialized inMiod Vallat
2011-04-06Correctly protect the arguments of the AIC_ASSERT() macro.Miod Vallat
2011-04-05pull the dmamam wrapper in from all my other drivers and use it to replaceDavid Gwynne
2011-04-05wd_hibernate_io() is a standalone disk io writer which tries to notTheo de Raadt
2011-04-05- use nitems() no binary change on amd64Jasper Lievisse Adriaanse
2011-04-05mechanic rename M_{TCP|UDP}V4_CSUM_OUT -> M_{TCP|UDP}_CSUM_OUTHenning Brauer
2011-04-05add a scsi probe routine so isp(4) can reject high luns when the midlayerDavid Gwynne
2011-04-05Deep below wdc_ioc_ata_cmd() it is possible that some controller (present orTheo de Raadt
2011-04-04Kill some #if 0'ed code (the 'raw' scsi path). Move splx()Kenneth R Westerback
2011-04-03move twe over to iopools so we can get rid of another NO_CCB user. thisDavid Gwynne
2011-04-03Sprinkle spltty around code which plays with either the video memory orMiod Vallat
2011-04-03Iopoolification of some less common scsi drivers.Kenneth R Westerback
2011-03-23only read from the UART if there is something to read. fix beagle, otherwiseFederico G. Schwindt
2011-03-18Fix firmware loading at startup (and resume); from Tim van der MolenTheo de Raadt
2011-03-13Wake On LAN support for re(4).Stefan Sperling
2011-03-06Make sure MEMORYBARRIER(SYNC_REG) performs a read/write bus_space_barrier,Miod Vallat
2011-03-05Wait until the DMA engine is stopped before unmapping buffers and descriptors.Mark Kettenis
2011-03-04Peek at the interrupt status register before poking with the reply postMike Belopuhov
2011-03-01back out r1.162, the one that bumps openings up on sas and fcDavid Gwynne
2011-02-22Mark descriptors as invalid *before* unmapping the associated mbuf.Mark Kettenis
2011-02-22ami figures out the names of the enclosure attached to it by snoopingDavid Gwynne