summaryrefslogtreecommitdiff
path: root/sys/dev/ic
AgeCommit message (Expand)Author
2007-02-03Don't set the RL_CFG1_FULLDUPLEX bit. The RL_CFG1_FULLDUPLEX bit inKenneth R Westerback
2007-02-02up the accepted length to ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN on rx; from brad@Jason Wright
2007-01-31oops. now is the miodski version of the diff (;Michael Shalayeff
2007-01-31run a timeout (calling intr handler) to recover from in buffer oflows that ma...Michael Shalayeff
2007-01-27When flooding dmesg with ``can't read/write phy register'', be nice enough toMiod Vallat
2007-01-27convert to our locks to rwlocks.David Gwynne
2007-01-26remove duplicate test; from bradJason Wright
2007-01-24revert changes committed between r1.25 and 1.26.Damien Bergamini
2007-01-23adjust m_data and m_len directly rather than calling m_adj().Marcus Glocker
2007-01-19Some '= 0' -> '= NULL' cleanup for pointer fields and return values.Kenneth R Westerback
2007-01-18do not freak out if cannot map physdrives into volumes and handle it proper e...Michael Shalayeff
2007-01-14Introduce register read/write helper routines for radio and phy. StartMarcus Glocker
2007-01-12Keep the wsscreen_descr in the softc, to allow sti of different textMiod Vallat
2007-01-11Add the ability for a sti backend to specify callbacks to disable and enableMiod Vallat
2007-01-11Allow sti_attach_common() to return an error code, and do not fall intoMiod Vallat
2007-01-08Fix comment. From Constantine A. Murenin.Mark Kettenis
2007-01-07Fix VCore voltage detection on w83637hf.Mark Kettenis
2007-01-07Spacing, comments.Marcus Glocker
2007-01-07Initialize GPIO.Marcus Glocker
2007-01-06Fix error string for loadfirmware().Marcus Glocker
2007-01-06Make the driver able to read the network byte ordered firmware file.Marcus Glocker
2007-01-05Check that ucode size doesn't get exceeded when parsing for a firmwareMarcus Glocker
2007-01-05If the firmware load routines fail, be sure the ucode gets freed.Marcus Glocker
2007-01-05Report about correct firmware filename if not found.Marcus Glocker
2007-01-05Prototypes spacing.Marcus Glocker
2007-01-05Make the upload of initialization values work again, after implementingMarcus Glocker
2007-01-05First shot of making the driver capable to parse several firmware filesMarcus Glocker
2007-01-03After the firmware has been loaded to the chip, read the exact firmwareMarcus Glocker
2007-01-03M_DUP_PKTHDR() cleanup. On static buffers M_DUP_PKTHDR() will leak mbuf tags.Claudio Jeker
2007-01-03Rename bcw_shm_write_4() to bcw_shm_ctl_word(). We need the originalMarcus Glocker
2007-01-03Pretty printing of debug messages.Marcus Glocker
2007-01-03Avoid mixing of u_int* and uint* in the same code. uint* wins.Marcus Glocker
2007-01-03Replace bus_space_read_2() by the BCW_READ16 macro.Marcus Glocker
2007-01-03Replace bus_space_write_2() by the BCW_WRITE16 macro.Marcus Glocker
2007-01-03Replace bus_space_read_4() by the BCW_READ macro.Marcus Glocker
2007-01-03Replace bus_space_write_4() by the BCW_WRITE macro.Marcus Glocker
2007-01-03Spacing, comments.Marcus Glocker
2007-01-03Add first shot of the firmware upload. Tested on i386 and amd64.Marcus Glocker
2007-01-03Uncomment bcw_powercontrol_crystal_off() for now because it leads toMarcus Glocker
2006-12-31Add a debug printf to warn when malo_init() fails and resets the card.Claudio Jeker
2006-12-31There is no need to busy wait in malo_send_cmd(). 0x0c14 only stores theClaudio Jeker
2006-12-31Use a bus_space_barrier instead of those stupid 0x0c14 reads to make sureClaudio Jeker
2006-12-31In malo_init() check for firmware loading errors and in case of an errorClaudio Jeker
2006-12-31malo_stop() never fails so no need to return an error. OK mglocker@Claudio Jeker
2006-12-31Use #ifdef MALO_DEBUG else a simple #define MALO_DEBUG will not work.Claudio Jeker
2006-12-31Bye bye unused acx_shutdown() we won't miss you.Claudio Jeker
2006-12-30Fix another printf where the format string did not match with the varargs.Claudio Jeker
2006-12-30spacing.Marcus Glocker
2006-12-30Don't use M_DUP_PKTHDR() on static mbufs. M_DUP_PKTHDR() copies the mtagClaudio Jeker
2006-12-30Add flow control support.Mark Kettenis
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-18 14:59:47 +0000