summaryrefslogtreecommitdiff
path: root/sys/dev/mii
AgeCommit message (Expand)Author
2006-03-05remove whitespace at the end of line.Brad Smith
2006-03-04Do not enable the Ethernet@WireSpeed PHY feature on 5705's and not 5750'sBrad Smith
2006-03-04regenBrad Smith
2006-03-04add the National Semiconductor DP83847 DsPHYTER PHY.Brad Smith
2006-02-28Remove a debug printf that crept into the last commit.Jonathan Gray
2006-02-28We need to special case ciphy to ask for RGMII interface at 2.5V for nfe.Jonathan Gray
2006-02-12regenBrad Smith
2006-02-12add OUI's for ASIX Electronics and CENiX Inc.Brad Smith
2006-02-12Correct information in dmesg again. -moj ok jsgMats O Jansson
2006-02-12Add support for IC+ IP101 (from brad). -moj ok jsgMats O Jansson
2006-02-12regenMats O Jansson
2006-02-12Change xxICPLUS to ICPLUS and correct the information. -mojMats O Jansson
2006-02-11use mii_phy_match().Brad Smith
2006-02-11regenBrad Smith
2006-02-11- add VIA Network Technologies and two VT6103 10/100 PHY's as found on vr NICs.Brad Smith
2006-01-15regenJonathan Gray
2006-01-15The RCJ part of 88E1111-RCJ is the package the ic comes in whichJonathan Gray
2005-12-10use the 5750 DSP code with the BCM5714 and BCM5780 too.Brad Smith
2005-12-08regenBrad Smith
2005-12-08BCM5715 -> BCM5780Brad Smith
2005-11-25load the 5750 DSP code on the 5705 PHY too.Brad Smith
2005-11-20treat the BCM5715 like the 5714Brad Smith
2005-11-20regenBrad Smith
2005-11-20add BCM5715Brad Smith
2005-11-15- Addition of more DSP init code for brgphy models that come with BCM5703 andBrad Smith
2005-11-06Add some DSP init code for BCM5221's.Brad Smith
2005-11-06load DSP code on all 5421's for now.Brad Smith
2005-11-06correctly track the falling edge of a media state change in mii_phy_tick().Brad Smith
2005-11-06move some macros from mii.h to miivar.hBrad Smith
2005-11-06re-merge old brgphy_mii_phy_auto().Brad Smith
2005-11-06- move MIIF_NOISOLATE so its set before calling PHY_RESET().Brad Smith
2005-11-06add DSP init code for BCM54K2.Brad Smith
2005-11-06split the DSP code into separate functions as done inBrad Smith
2005-11-06add a comment explaining what the 5401 DSP code does.Brad Smith
2005-11-05add init code for BCM5421.Brad Smith
2005-11-05regenBrad Smith
2005-11-05BCM5421K2 -> BCM54K2Brad Smith
2005-10-16make ukphy dmesg attach print on one line.Brad Smith
2005-10-07fix nameBrad Smith
2005-10-01add Broadcom BCM5421K2Brad Smith
2005-10-01regenBrad Smith
2005-10-01add the Broadcom BCM5421K2 PHY found in the Apple K2 IC in the G5.Brad Smith
2005-10-01load the BCM5401 DSP code for rev 0 and not rev 1.Brad Smith
2005-10-01add Broadcom BCM5462Brad Smith
2005-10-01regenBrad Smith
2005-10-01add the Broadcom BCM5462 PHY found in the Apple Vesta PHY IC in the iMac G5.Brad Smith
2005-09-17KNFBrad Smith
2005-09-17re-add code which allows setting master/slave flag for links withBrad Smith
2005-09-17- use PHY_RESET() on all models in brgphy_service()Brad Smith
2005-08-27regenBrad Smith
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 17:29:07 +0000