summaryrefslogtreecommitdiff
path: root/sys/dev/mii
AgeCommit message (Expand)Author
2008-10-20Enable the Gig master mode status display.Brad Smith
2008-10-07Make sure page 0 is selected when we initialize the PHY. Fixes problemsMark Kettenis
2008-09-26Add drivers for the JMicron JMC250/JMC260 Ethernet controllersJonathan Gray
2008-09-25regenBrad Smith
2008-09-25Add the id for the Atheros F2 PHY.Brad Smith
2008-09-25Add a driver for the Attansic F1 PHY.Brad Smith
2008-09-17Remove the unsupported media types explicitly listed in the switch casesBrad Smith
2008-09-11In rlphy_service() for the MII_TICK case don't bother to check whetherBrad Smith
2008-09-11Fix a typo.Brad Smith
2008-09-09regenBrad Smith
2008-09-09Recognize the Marvell 88E1116R Gig PHY.Brad Smith
2008-09-08remove some useless comments.Brad Smith
2008-09-08IEEE 802.3 Annex 28B.3 explicitly specifies the following relativeBrad Smith
2008-08-31remove http links to dead domain.Jonathan Gray
2008-08-30Move the link state check back up to the top of the various statusBrad Smith
2008-08-26Update comment to mention the 8211C.Brad Smith
2008-08-24regenBrad Smith
2008-08-24Add Atheros OUI and Atheros F1 id.Brad Smith
2008-08-24regenBrad Smith
2008-08-24BCM5714 also supports fiber interfaces.Brad Smith
2008-07-22more negotation -> negotiation; ok sthen@Martynas Venckus
2008-07-12regenBrad Smith
2008-07-12Add the OUI id for JMicron and the ids for the JMP202 FastE PHY andBrad Smith
2008-07-12Add support for the Marvell 88E8016 PHY.Brad Smith
2008-07-11If there is a 100baseT4 connection then fall through so as toBrad Smith
2008-07-11Check the correct BMSR bit in the capabilities field when checkingBrad Smith
2008-06-26First pass at removing clauses 3 and 4 from NetBSD licenses.Ray Lai
2008-06-13Add support for fiber PHY on bge(4) (BCM5714/BCM5780) andBrad Smith
2008-06-11Add a few comments.Brad Smith
2008-06-11some more BCM5708S registers.Brad Smith
2008-06-11regenBrad Smith
2008-06-11BCM5780 also has a fiber model.Brad Smith
2008-06-10formatting knits.Brad Smith
2008-06-10Some header cleanup. Remove some unused headers and shuffle some aroundBrad Smith
2008-06-07Currently unused at the moment but at least allow it to compile.Brad Smith
2008-05-30some KNF.Brad Smith
2008-05-29Recognize the Cicada CS8204 quad port PHY.Brad Smith
2008-05-24Store the model and revision information in the appropriate softcBrad Smith
2008-05-23Fix detection of 10baseT on rev 2 and up.Mark Kettenis
2008-05-13Remove commented out NetBSD __KERNEL_RCSID macro usage.Brad Smith
2008-05-13Since Ethernet links can only be full duplex or half duplex the linkBrad Smith
2008-04-30regenBrad Smith
2008-04-30Add the id for the Marvell 88E3016 10/100 PHYBrad Smith
2008-04-26Adjust the output voltage for BCM5906 PHY otherwise it might not beBrad Smith
2008-04-20Add a workaround for a CRC bug errata with BCM5701 A0 and B0 chipsetBrad Smith
2008-04-02Add support for the DP83865.Mark Kettenis
2008-04-02regenMark Kettenis
2008-04-02Add the National Semiconductor DP83865 Gigabit PHY.Mark Kettenis
2008-04-02regenBrad Smith
2008-04-02Add the Cicada CS8204 quad port PHY.Brad Smith
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 00:49:10 +0000