summaryrefslogtreecommitdiff
path: root/sys/dev/pci/envy.c
AgeCommit message (Expand)Author
2014-05-17unbreak build with AUDIO_DEBUG: use %lx for bus_addr_tAlexandre Ratchov
2013-05-24Since audio code is mp safe, establish isa and pci audio interruptsAlexandre Ratchov
2013-05-15Introduce a global interrupt-aware mutex protecting dataAlexandre Ratchov
2013-04-22handle long long time_t in debug codeTheo de Raadt
2013-03-14add macros for ap192k cards, no behavior changeAlexandre Ratchov
2013-02-15Use uvm_km_kmemalloc_pla() to allocate dma memory below 2^28 limit,Alexandre Ratchov
2012-03-30If the MIDI UART is not ready for output, don't spin at IPL_CLOCK;Alexandre Ratchov
2011-04-27fix the interrupt handler in the case when the interrupt is sharedAlexandre Ratchov
2010-12-22* recognize/support the Dynex DX-SC51 in envy(4)Jacob Meuser
2010-10-30tweak gpio pins of julia cards to select the correct multiplier forAlexandre Ratchov
2010-10-08Call bus_space_barrier() after each read and write, since thisAlexandre Ratchov
2010-10-08encoding of envy is little endian, not native endian, probably fixes envyAlexandre Ratchov
2010-10-08put all calls bus_space_xxx() into functions, makes the code smallerAlexandre Ratchov
2010-10-07If the card model is not ``HT/PT'', then check that the DMA physicalAlexandre Ratchov
2010-10-06Give the device the physical address obtained from the DMA mappingAlexandre Ratchov
2010-10-04add support for midi(4) ports to envy(4)Alexandre Ratchov
2010-09-08Add support for Terratec EWX 24/96 based on initial diff from ratchov@.Stefan Sperling
2010-07-31add support for M-audio Audiophile 192kAlexandre Ratchov
2010-07-21remove duplicate AP192K_GPIO_XXX macros,Alexandre Ratchov
2010-07-21make ENVY_GPIO_XXX macros card specific, add stub for audiophile 192kAlexandre Ratchov
2010-07-15add two new members to structs audio_encoding and audio_prinfo.Jacob Meuser
2010-04-08these files don't need to include proc.h anymore. ok oga for agpTed Unangst
2010-03-07Don't stop DMA in envy_halt_intput() and/or envy_halt_output().Alexandre Ratchov
2010-02-25Fix up some of the comments to use the correctAlexandre Ratchov
2010-02-25Remove trailing spaces,Alexandre Ratchov
2010-02-20Add necessary bits to support AC97 codecs in envy and add supportAlexandre Ratchov
2009-11-02Add support for ``M-Audio Revolution 5.1'' cards, based on envy24HT.Alexandre Ratchov
2009-10-24add the subvendor ID of ``M-Audio Audiophile 2496'' and add it toAlexandre Ratchov
2009-10-11At initialization of HT chips, write configuration on the correspondingAlexandre Ratchov
2009-05-18the block size must be multiple of the pci burst size (overwiseAlexandre Ratchov
2009-05-08add support HT mixer knobs (ie routing control). Allow monitoringAlexandre Ratchov
2009-05-08add support for the ak4358 DAC used in ESI Julia cards. There areAlexandre Ratchov
2009-05-08print card model, the number of inputs and the number of outputsAlexandre Ratchov
2009-05-08add support for m-audio delta 1010, delta 66 and delta 44 sinceAlexandre Ratchov
2009-05-08rename few functions and macros, fix styleAlexandre Ratchov
2009-05-08expose HT mixer; since neither the digital mixer nor codecAlexandre Ratchov
2009-05-08use the number of channels rather than the number of stereo dacs/adcs,Alexandre Ratchov
2009-05-08hide controls corresponding to missing dacs, adcs or spdifs.Alexandre Ratchov
2009-05-04put codec-specific mixer bits in their own routines andAlexandre Ratchov
2009-05-03reorganize mixer bits to allow, supporting codec-dependent mixerAlexandre Ratchov
2009-04-25add basic support for Envy24HT chips and for ``ESI Juli@''Alexandre Ratchov
2009-04-25start splitting the driver in two parts: one specific to theAlexandre Ratchov
2009-03-29make various strings ("can't map mem space" and similar) more consistentStuart Henderson
2009-03-04don't bus_space_unmap() sc->mt_ioh with the wrong bus tagAlexandre Ratchov
2009-01-17use 24-bit precision (encoded in 32-bit words) rather thanAlexandre Ratchov
2008-12-09Non soundblaster-like devices must set AUDIO_PROP_INDEPENDENTAlexandre Ratchov
2008-11-29use the the correct register mask. Fixes certain mixer settingsAlexandre Ratchov
2008-10-25audio(9) says low level drivers are allowed to change the requestedJacob Meuser
2008-04-30don't stop both play and record in envy_halt_input() ad envy_halt_output()Alexandre Ratchov
2008-04-21allow low level audio drivers to specify a default sample format,Jacob Meuser