| Age | Commit message (Expand) | Author |
|---|
| 2009-08-13 | - consistify cfdriver for the ethernet drivers (0 -> NULL) | Jasper Lievisse Adriaanse |
| 2009-08-09 | MCLGETI() will now allocate a mbuf header if it is not provided, thus | Theo de Raadt |
| 2009-08-08 | bring comments in line with reality; from Brad | Christian Weisgerber |
| 2009-08-06 | Backout r1.274, william@ has tracked down watchdog timeouts with | Stuart Henderson |
| 2009-07-21 | Add a family flag for the original 5700 series chipsets. Idea from FreeBSD. | Christian Weisgerber |
| 2009-06-19 | Allow bge(4) to recognize the revisions of the 57780 ASICs. From Brad. | Christian Weisgerber |
| 2009-06-11 | Limit the BCM5701 B5 chipset to 32-bit mode as a workaround for a | Stuart Henderson |
| 2009-06-11 | Set the DMA read watermark to 4 on the BCM5703 chipset in PCI-X mode. | Stuart Henderson |
| 2009-06-06 | remove unused variable prevlen and a second initialization of ifp. | Stuart Henderson |
| 2009-06-05 | %zu is not meant for size_t in the kernel. Change to %lu. | Ray Lai |
| 2009-06-04 | enable IPv6 receive TCP/UDP checksum offload for the 5755 and later chips; | Christian Weisgerber |
| 2009-06-04 | replace the cumbersome macros that check for chip revisions with quirk flags | Christian Weisgerber |
| 2009-06-03 | rename some macros for more consistent naming; from Brad | Christian Weisgerber |
| 2009-06-03 | set IFF_ALLMULTI properly also when in promiscuous mode and some | Christian Weisgerber |
| 2009-06-03 | register bit definitions instead of magic numbers; | Christian Weisgerber |
| 2009-06-02 | minor tidying; from Brad; ok sthen@ | Christian Weisgerber |
| 2009-06-02 | "Add a macro to define the newer generation of bge(4) chipsets. Simplifies | Stuart Henderson |
| 2009-05-24 | Support hardware checksumming, from FreeBSD. | Christian Weisgerber |
| 2009-05-21 | add support for BCM576x, 577xx, and some new 572x/578x devices. | Stuart Henderson |
| 2009-04-23 | Start using extended buffer descriptors on the jumbo ring and use MCLGETI to | Mark Kettenis |
| 2009-01-27 | make drivers tell the mclgeti allocator what their maximum ring size is | David Gwynne |
| 2008-12-23 | sizeof(bge_devices) / sizeof(bge_devices[0]) -> nitems(bge_devices) | David Gwynne |
| 2008-12-23 | if we cant put enough packets on the rx ring then schedule a timeout to | David Gwynne |
| 2008-12-03 | switch bge over to using MCLGETI when allocating mbufs for the rx ring. | David Gwynne |
| 2008-11-28 | Eliminate the redundant bits of code for MTU and multicast handling | Brad Smith |
| 2008-11-22 | perform bus_dmamap_syncs on the rx mbufs. this is obviously maintained by | David Gwynne |
| 2008-11-09 | Introduce bpf_mtap_ether(), which for the benefit of bpf listeners | Christian Weisgerber |
| 2008-11-08 | brad, noone said you could go making changes like that (doubling the | Theo de Raadt |
| 2008-11-08 | When initializing the standard RX ring, do not allocate mbufs clusters for the | Theo de Raadt |
| 2008-11-08 | Clean up some of the comments. | Brad Smith |
| 2008-11-08 | When initializing the standard RX ring, allocate mbufs clusters for the | Brad Smith |
| 2008-11-07 | When initializing the MAC put the PHY into ready state for BCM5906 | Brad Smith |
| 2008-10-19 | Re-add support for RX VLAN tag stripping. | Brad Smith |
| 2008-10-16 | Switch the existing TX VLAN hardware support over to having the | Christian Weisgerber |
| 2008-10-14 | Change m_devget()'s outdated and unused "offset" argument: It is | Christian Weisgerber |
| 2008-10-02 | First step towards cleaning up the Ethernet driver ioctl handling. | Brad Smith |
| 2008-09-23 | Rewrite two small sections of code in bge_blockinit() to simplify the | Brad Smith |
| 2008-09-18 | Introduce the infrastructure required to support hardware VLAN tag | Christian Weisgerber |
| 2008-09-10 | Convert timeout_add() calls using multiples of hz to timeout_add_sec() | Bret Lambert |
| 2008-09-08 | Fix a link state issue reported by reyk@ | Brad Smith |
| 2008-08-26 | Better strategy to single out onboard bge(4)'s on sparc64 machines. | Mark Kettenis |
| 2008-08-24 | Tadpole Viper onboard ethernet has no eeprom either, but the PROM entry | Theo de Raadt |
| 2008-08-24 | proper indent | Theo de Raadt |
| 2008-07-17 | Add a flag and allow the driver to identify the BCM5788 chipsets. They're | Brad Smith |
| 2008-07-16 | Enable the read DMA engine's PCI read request burst length long burst | Brad Smith |
| 2008-06-07 | Add baudrate handling for fiber boards using the TBI interface. | Brad Smith |
| 2008-05-24 | And another Fujitsu Gigabit Etherenet card that is a bge(4) in disguise. | Brad Smith |
| 2008-05-23 | Another Fujitsu Gigabit Etherenet card that is a bge(4) in disguise. | Mark Kettenis |
| 2008-05-23 | Simplify the combination use of pci_mapreg_type()/pci_mapreg_map() as | Brad Smith |
| 2008-05-21 | Fujitsu PRIMEPOWER250/450 secondary LAN is a BCM5703C in disguise. | Mark Kettenis |
