summaryrefslogtreecommitdiff
path: root/sys/dev/pci
AgeCommit message (Expand)Author
2006-07-22add PCI ids for the ATI SB600 South Bridge devices.Brad Smith
2006-07-21Do not check if CORBRPST is set for any chipsets.Brad Smith
2006-07-21lower the number of TX descriptors from 8192 to 2048.Brad Smith
2006-07-21Revert the last commit. The TX descriptor count does not really needBrad Smith
2006-07-20Re-enable the widget init routine for the Analog Devices AD1981HD codec.Brad Smith
2006-07-20Enable bus master; X probably needs it to do accelerated graphics.Mark Kettenis
2006-07-20fix various ways of spelling 'access' wrong in commentsMartin Reindl
2006-07-20update for the new ADMtek PCI ids.Brad Smith
2006-07-20regenBrad Smith
2006-07-20- The ADMtek AN983B is actually a ADM9511. [1]Brad Smith
2006-07-20Don't check the CORBRPRST flag for the NVidia MCP51/55 and ALI M5461.Brad Smith
2006-07-19usually works better when you check for the right device id. tsk tsk.Federico G. Schwindt
2006-07-19fix crash by reading a mixer value with AD1891HD codec, whichBrad Smith
2006-07-18attach to the ADMtek 983B chipset as well.Brad Smith
2006-07-18regenBrad Smith
2006-07-18add the ADMtek AN983B PCI id.Brad Smith
2006-07-18regenMoritz Jodeit
2006-07-18Add O2Micro OZ711EC1 SmartCardBus Controller.Moritz Jodeit
2006-07-18On some TI controllers, disable the SD/MMC bit on the flash media soFederico G. Schwindt
2006-07-18regenBrad Smith
2006-07-18the VIA HDA PCI id matches against multiple chipsets.Brad Smith
2006-07-18increase the number of Jumbo slots a little bit for sparc64.Brad Smith
2006-07-17regenBrad Smith
2006-07-17fix some of the IBM entries.Brad Smith
2006-07-17correct the way hosts are alloc'ed. fixes crashes on controllers withFederico G. Schwindt
2006-07-17syncTheo de Raadt
2006-07-17new bridge; sthen@symphytum.spacehopper.orgTheo de Raadt
2006-07-17regenDavid Gwynne
2006-07-17add areca and their raid productsDavid Gwynne
2006-07-16Match a few more Promise SATA chips which should workJonathan Gray
2006-07-15regenMark Kettenis
2006-07-15Add MCP04 ISA bridge.Mark Kettenis
2006-07-14clean up a few defines and apply some knfDavid Gwynne
2006-07-14regenJonathan Gray
2006-07-14Add a few more Promise devices.Jonathan Gray
2006-07-14dont pretend to configure the BAR to only use 32bit addressing, and makeDavid Gwynne
2006-07-14debug message macros.Brad Smith
2006-07-13regenBrad Smith
2006-07-13Add the VIA VT8237A HD Audio PCI id.Brad Smith
2006-07-12only call the init routine if the interface is not already running.Brad Smith
2006-07-12move a few structures and macros over to the header file.Brad Smith
2006-07-12use config space macros.Brad Smith
2006-07-12check ifp->if_hardmtu instead of ETHERMTU.Brad Smith
2006-07-12increase the maximum Jumbo frame length and correct the STGE_MaxFrameSizeBrad Smith
2006-07-11put the increasing tx threshold message under SF_DEBUGBrad Smith
2006-07-11Do not fiddle with the io/mem space enable bits in the PCI command/statusMark Kettenis
2006-07-11Read PCI command/status register right before modifying it to prevent restoringMark Kettenis
2006-07-10in pciide_mapregs_compat() explicitly enable PCI IO, then remove all theTheo de Raadt
2006-07-10remove ifdef __OtherBSD__. no binary changeDavid Gwynne
2006-07-10add code for the interrupt holdoff support. bump NS_IHR_DELAY above 0 toBrad Smith
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 18:55:37 +0000