summaryrefslogtreecommitdiff
path: root/sys/dev/pci
AgeCommit message (Collapse)Author
2006-08-09add Intel 82571EB PCI Express quad port PCI id.Brad Smith
From Intel's FreeBSD driver.
2006-08-09Use the DMA map size from the DMA map instead of the dma_size field withBrad Smith
bus_dma sync's. ok dlg@ marco@
2006-08-09regenBrad Smith
2006-08-09add another Intel 5000 PCIe bridge and another Intel 6321ESB USB port.Brad Smith
2006-08-08regenBrad Smith
2006-08-08add Conexant CX2388x Video and Audio PCI decoder ids.Brad Smith
2006-08-07whitespace fixesDavid Gwynne
2006-08-07from the drivers side of the iop331 there is only one set of interruptDavid Gwynne
registers to deal with, the other set are used on the firmware side of the device. shrink a bit by removing the definitions of the firmwares registers.
2006-08-06endian fixes. this works on sparc64 now.David Gwynne
2006-08-06endianness.Damien Bergamini
2006-08-06cosmetic tweaks.Damien Bergamini
2006-08-06fill out the interrupt handler. io is now no longer polled, and as a bonusDavid Gwynne
it's fairly fast :)
2006-08-06we can support more than one entry in an sgl, so stop lying to bus_dmaDavid Gwynne
2006-08-06sync PCI ids.Brad Smith
2006-08-06regenBrad Smith
2006-08-06be more consistent in naming MegaRAID devices.Brad Smith
2006-08-06add another MegaRAID PCI id.Brad Smith
2006-08-06regenBrad Smith
2006-08-06add another MegaRAID PCI id.Brad Smith
2006-08-06regenBrad Smith
2006-08-06add vendor Mitac and Intel 6321ESB SATA, AHCI SATA and SATA RAID PCI ids.Brad Smith
2006-08-06add the Intel 6321ESB IDE controller.Brad Smith
2006-08-06fix message printing when resetting the power state.Brad Smith
2006-08-06less magicDavid Gwynne
2006-08-06io commands are the only ones every posted on the queues, so hardcode theDavid Gwynne
type into the ccb rather than use void *s and insane casting to get at bits of the command.
2006-08-05implement reply and post queue handling, but only polled for now. io shouldDavid Gwynne
work with this, but i cant test without disks.
2006-08-04move the promiscuous mode handling code into bge_setpromisc() and simplifyBrad Smith
the interface flags ioctl handler.
2006-08-04simplify interface flags ioctl handler.Brad Smith
2006-08-04typo, loose -> loseBrad Smith
2006-08-04extend the set of supported 802.11a channels (100-140).Damien Bergamini
2006-08-04- merge em/ixgb_disable_promisc() into em/ixgb_set_promisc().Brad Smith
- rearrange interface flags ioctl handler.
2006-08-04and the same goes for sk_init_yukon().Brad Smith
2006-08-04remove now redundant promiscuous mode handling code from sk_init_xmac().Brad Smith
2006-08-04refactor the promiscuous mode handling code and simplify the ioctl handler.Brad Smith
2006-08-04Fix busy check for PHY write operation with Yukon chips.Brad Smith
From yongari@FreeBSD
2006-08-04fix up error messages in em/ixgb_allocate_pci_resources().Brad Smith
2006-08-03syncTheo de Raadt
2006-08-03do not waste space with long namesTheo de Raadt
2006-08-03- initialize interrupt string to NULL.Brad Smith
- remove bogus 32-bit memory type flag when mapping I/O space. ok deraadt@
2006-08-03Fix 802.11a. With these changes I can now connect my wpi(4) toDamien Bergamini
a ral(4)-based 802.11a AP.
2006-08-03pci front end for acxTheo de Raadt
2006-08-03white space fixesDavid Gwynne
2006-08-03regenBrad Smith
2006-08-03remove a underscore from the ITE IT8888F entry.Brad Smith
2006-08-03regenBrad Smith
2006-08-03properly deal with Atheros chips that use a 64-bit memory address space.Brad Smith
From martin@NetBSD
2006-08-03fix typo, 5300ESB -> 6300ESBBrad Smith
2006-08-03regenBrad Smith
2006-08-03add NVIDIA CK804 Mem controller.Brad Smith
2006-08-02regenBrad Smith
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 12:51:51 +0000