summaryrefslogtreecommitdiff
path: root/sys/dev/pci
AgeCommit message (Expand)Author
2007-10-02add initial support for the Marvell PCIe Yukon FE+ Fast Ethernet chipsets.Brad Smith
2007-10-02In vr_attach() only touch the VR_STICKHW register if the adapterBrad Smith
2007-10-02regenBrad Smith
2007-10-02add new Intel E1000 and 10Gb PCIe PCI ids.Brad Smith
2007-10-01More easy bzero() -> M_ZERO. Use 'p = malloc(sizeof(*p) ...' whereKenneth R Westerback
2007-09-30Add support for the high-resulution timer found in the GPS170PCI card.Marc Balmer
2007-09-29Add first part of queue magic to attach.Marco Peereboom
2007-09-27Add automatic rate control (AMRR).Marcus Glocker
2007-09-26regenDeanna Phillips
2007-09-26Add Sigmatel to vendors.Deanna Phillips
2007-09-26Clean up STAC7661 codec: sort mixer items, add prev and next pointersDeanna Phillips
2007-09-22Obvious M_ZERO/bzero() change. Note that isp_param is void *, so theKenneth R Westerback
2007-09-20Add mixer items, master volume and dacgroup init for Analog DevicesDeanna Phillips
2007-09-19M_ZERO. all the cool kids are doing it.David Gwynne
2007-09-19Use the proper baudrate for 10Gb hw now that it can fit into the buadrateBrad Smith
2007-09-19Remove unused tulip_21041_media_noprobe() function and tulip_21041np_boardswBrad Smith
2007-09-18arc4random_bytes() is the preferred interface for generating nonces;Damien Miller
2007-09-18Only the most obvious bzero() -> M_ZERO changes. No cast changes, noKenneth R Westerback
2007-09-17- Use a 64-bit int for the baudrate within the ifmedia_baudrate struct andBrad Smith
2007-09-17Remove an unused function msk_setfilt() which was copied from sk(4) and isBrad Smith
2007-09-17Only the most obvious bzero() -> M_ZERO changes. No cast changes, noKenneth R Westerback
2007-09-17regenBrad Smith
2007-09-17add the Marvell Yukon 2 88E8040 PCI id.Brad Smith
2007-09-17Some bzero() -> M_ZERO. ok jakemsr@Kenneth R Westerback
2007-09-15replace ctob and btoc with ptoa and atop respectivelyMartin Reindl
2007-09-15Properly fill in some of the pci information the driver uses internally.Jonathan Gray
2007-09-14add the NVIDIA MCP73/MCP77 IDE controller PCI ids.Brad Smith
2007-09-14- correct error message if pci_mapreg_map() fails by not printing theBrad Smith
2007-09-14regenBrad Smith
2007-09-14add the Marvell Yukon 2 88E8048 PCI id.Brad Smith
2007-09-14add two new chip revisions.Brad Smith
2007-09-13syncDamien Bergamini
2007-09-13+ Ralink Tech. RT2860Damien Bergamini
2007-09-13regenBrad Smith
2007-09-13sync AMD SB600 PCI id with the new name.Brad Smith
2007-09-13rename the AMD SB600 SMBus controller entry to X00 since this sameBrad Smith
2007-09-13spacing nit.Brad Smith
2007-09-13Add the NVIDIA MCP73 SMBus controller.Brad Smith
2007-09-13Forgot to set psc->psc_pcitag. Replace all PCI/Cardbus config spaceMarcus Glocker
2007-09-13Enable access to PCI and Cardbus config space from the driver. Lets usMarcus Glocker
2007-09-13regenBrad Smith
2007-09-13add the NVIDIA MCP73 SMBus controller PCI id.Brad Smith
2007-09-13- correct an unknown Marvell SATA entry to use the appropriateBrad Smith
2007-09-13- remove the bogus second AHCI PCI id for the AMD SB600 chipset.Brad Smith
2007-09-12Remove the old software bit-banging MII interface, we started usingBrad Smith
2007-09-12s/atoin/ation/ typosCharles Longeau
2007-09-12PCI and Cardbus hookup for the Broadcom AirForce devices.Marcus Glocker
2007-09-12In nfe_start() do a fast return if IFF_OACTIVE is set, inJonathan Gray
2007-09-11s/iwn_edcaupdate/iwn_updateedca/ + hook it into net80211Damien Bergamini
2007-09-11- add callbacks for setting EDCA parameters and pairwise crypto keys.Damien Bergamini
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-06 12:03:30 +0000