summaryrefslogtreecommitdiff
path: root/sys/dev/pci
AgeCommit message (Expand)Author
2007-06-01initialize the ringsReyk Floeter
2007-06-01Only probe phy's at address 0; gets rid of bogus phy's on theMark Kettenis
2007-05-31further improvement of the bus space i/o. firmware loading, booting,Reyk Floeter
2007-05-31enable all debugging messages by default if the driver is compiled withReyk Floeter
2007-05-31fix the myx_write functionReyk Floeter
2007-05-31add myx(4)Reyk Floeter
2007-05-31initial bits of a new driver for the Myricom Myri-10G Lanai-Z8E 10GbReyk Floeter
2007-05-31only call em_init() when IFF_UP is set, not unconditional.Henning Brauer
2007-05-311000 != 0x1000 (4096)Chris Kuethe
2007-05-30Move the knob for the interrupt throttling register next to the knobs forChris Kuethe
2007-05-30fix the ether_aton-like function to print the correct lladdr (swap bytes)Reyk Floeter
2007-05-30my (dlg says crappy) laptop requires some more delays in port_reset orTed Unangst
2007-05-29sprinkle some SMALL_KERNEL to permit bio/softraid to run on boot mediaTodd T. Fries
2007-05-29Fix bus_dmamap_sync size argument.Alexander Yurchenko
2007-05-28fix C++ style commentChris Kuethe
2007-05-28make it compile on i386Reyk Floeter
2007-05-28Enable interrupt holdoff on DP83816 chips. This significantly improvesChris Kuethe
2007-05-28Bump timeout.Alexander Yurchenko
2007-05-28Decrease max number of commands to 128.Alexander Yurchenko
2007-05-28Start adding copperhead chipset support. Not tested at all.Alexander Yurchenko
2007-05-28Add more MII glue. Still not working but I want to get this into the tree.Claudio Jeker
2007-05-28Fix timeout loop in ips_poll().Alexander Yurchenko
2007-05-28Better debug printf.Alexander Yurchenko
2007-05-28Initial bits of if_media and mii support.Claudio Jeker
2007-05-28use memcpy when copying to/from the fifos, apparently gcc can do a betterDavid Gwynne
2007-05-28Provide a separate DMA-able command frame buffer for each CCB to preventAlexander Yurchenko
2007-05-28Sprincle some more scsi_done().Alexander Yurchenko
2007-05-28Release CCB before calling scsi_done(). Thanks dlg@ for the tip.Alexander Yurchenko
2007-05-27Add basic error detection.Alexander Yurchenko
2007-05-27Better debug printf.Alexander Yurchenko
2007-05-27A completely rewritten ips driver. Still work in progress but alreadyAlexander Yurchenko
2007-05-27Attach ifp to che(4) by cheating a bit -- at least in dlg's opinion.Claudio Jeker
2007-05-27move bus_space funcs out of the way, sprinkle some knf.David Gwynne
2007-05-27shuffle things around a bit. this organises the code more like tht.David Gwynne
2007-05-27Implement the PDV eeprom read functions plus some other minor cleanup.Claudio Jeker
2007-05-26chop ETHER_ALIGN off the size of the packet we tell the hw we can doDavid Gwynne
2007-05-26ETHER_ALIGN rx mbuf so that it works on strict alignment archs. OK dlg@Claudio Jeker
2007-05-26correctly byteswap the mac address when moving it on and off teh cardDavid Gwynne
2007-05-26add some htole64sReyk Floeter
2007-05-26wrap the debug macro in do { } while (0)David Gwynne
2007-05-26reformat the softc to make it look like everything else we have.David Gwynne
2007-05-26get rid of #define sc_if sc_arpcom.ac_ifDavid Gwynne
2007-05-26this isnt netbsdDavid Gwynne
2007-05-26tx descriptor fixesReyk Floeter
2007-05-26First bits of che(4) a driver for various Chelsio 10Gb Ethernet cards.Claudio Jeker
2007-05-26one extern seems to be better than 20 for ifqmaxlen; ok krwJason Wright
2007-05-26separate the attach information from the status information with a colon.Reyk Floeter
2007-05-26cleanupReyk Floeter
2007-05-26increase the delay to wait for the firmware to become ready, the card needsReyk Floeter
2007-05-26update some registers and the tx descriptor layout to match the latestReyk Floeter