Age | Commit message (Collapse) | Author | |
---|---|---|---|
2006-05-08 | - make this compile with AZALIA_DEBUG | Brad Smith | |
- introduce WIDGET_CHANNELS macro From NetBSD | |||
2006-05-08 | - Don't assume the device always has PCI_MAPREG_MEM_TYPE_64BIT. [1] | Brad Smith | |
- OpenBSD-ify dmesg entry and error path printf's. [1] From NetBSD | |||
2006-05-07 | fix a typo and some KNF. | Brad Smith | |
2006-05-07 | - Remove unreachable bus_dmamap_unload() in em_dma_malloc(). | Brad Smith | |
- Set the dma_tag to NULL upon failure in em_dma_malloc(). - In em_dma_free(), return if dma_tag is NULL. | |||
2006-05-06 | restore ALTQ support which was lost with rev 1.87 | Brad Smith | |
2006-05-03 | regen | Brad Smith | |
2006-05-03 | add the Neterion Xframe-II 10GbE product id. | Brad Smith | |
2006-05-01 | - when setting the interface address, only call ixgb_init() if the interface | Brad Smith | |
is not already running. - remove splnet usage from ixgb_intr(). - replace magic value of 32 with IXGB_MAX_SCATTER. | |||
2006-05-01 | sprinkle some tabs. | Brad Smith | |
2006-05-01 | Activate Tx descriptor poll timer in order to protect possible loss | Brad Smith | |
of SK_TXBMU_TX_START command. Previously the driver continuously issued SK_TXBMU_TX_START when it notices pending Tx descriptors not processed yet in interrupt handler. That approach would add additional PCI write access overhead under high Tx load situations and it might fail if the first SK_TXBMU_TX_START was lost and no interrupt is generated from the first SK_TXBMU_TX_START command. From FreeBSD | |||
2006-05-01 | Added Rx/Tx FIFO flush support for Yukon | Brad Smith | |
From FreeBSD | |||
2006-05-01 | A new function sk_yukon_tick(), to handle auto-negotiation properly for | Brad Smith | |
Yukon-based adapters. From FreeBSD | |||
2006-05-01 | replace magic value of 32 with EM_MAX_SCATTER. | Brad Smith | |
2006-05-01 | increase the Tx ring count from 64 to 256. | Brad Smith | |
ok jsg@ damien@ | |||
2006-05-01 | call iwi_stop() at beginning of iwi_init() so that all rings are properly | Damien Bergamini | |
reset when iwi_init() is called from iwi_ioctl() on ENETRESET. this fixes a firmware panic when setting a WEP key multiple times for instance. fix some printf while i'm here. pointed out by Kurt Miller (kurt@). | |||
2006-05-01 | always call xge_init() here, for the time being. | Brad Smith | |
2006-05-01 | OpenBSD-ify the attach function printf's. | Brad Smith | |
2006-05-01 | initial port of a driver for the Neterion Xframe-I 10Gb Ethernet adapter. | Brad Smith | |
From NetBSD | |||
2006-04-30 | style | Brad Smith | |
2006-04-30 | - check for IFF_RUNNING being set before calling lge_init(). | Brad Smith | |
- call lge_setmulti() when enabling/disabling promisc mode or if the IFF_ALLMULTI flag is set. | |||
2006-04-30 | - Use SK_IS_GENESIS/SK_IS_YUKON where appropriate | Brad Smith | |
- Remove SK_YUKON_FAMILY | |||
2006-04-30 | - Interrupt handler now checks shared interrupt source and protects | Brad Smith | |
the interrupt handler from NULL pointer dereference which was caused by odd status word value. The status word can return 0xffffffff if the cable is unplugged while Rx/Tx/auto-negotiation is in progress. From FreeBSD | |||
2006-04-30 | Update if_oerrors if we encounter watchdog error. | Brad Smith | |
From FreeBSD | |||
2006-04-30 | - Added/corrected register definitions for Yukon. | Brad Smith | |
(Register information from Linux skge driver.) From FreeBSD | |||
2006-04-30 | Free one more resource on attach failure. | Brad Smith | |
From NetBSD ok martin@ | |||
2006-04-29 | regen | Jonathan Gray | |
2006-04-29 | Add some more MCP04 ids, found in dmesg from ehunger at inventhorizon.com | Jonathan Gray | |
2006-04-28 | when setting the interface address, only call em_init() if the interface | Brad Smith | |
is not already running. | |||
2006-04-28 | and store a copy of the current interface flags in the softc. | Brad Smith | |
this time without mixing in another diff. | |||
2006-04-28 | backout previous, Brad probably forgot to commit some bits here | Martin Reindl | |
found by dhartmei@ | |||
2006-04-28 | regen | Steven Mestdagh | |
2006-04-28 | add National Instruments PCI-GPIB card; ok kettenis | Steven Mestdagh | |
2006-04-28 | check for IFF_RUNNING being set before calling vr_init(). | Brad Smith | |
2006-04-28 | and store a copy of the current interface flags in the softc. | Brad Smith | |
2006-04-27 | Quirk for MSI Megabook S270 audio output. Ok deraadt@. | Matthieu Herrb | |
2006-04-27 | Match the ICH7-M DH in RAID mode and ask for | Jonathan Gray | |
IDE SATA mode of operation. | |||
2006-04-27 | regen | Jonathan Gray | |
2006-04-27 | ICH7-M DH in RAID mode, from ICH7 errata datasheet. | Jonathan Gray | |
2006-04-26 | Remove ICH6M from case statements in IDE code now we | Jonathan Gray | |
treat it like a SATA controller. reminded by brad@ | |||
2006-04-26 | Fix a typo in register definitions: looks like somebody copied the | Brad Smith | |
CB_SOCKET_STAT_3VSOCK definition to CB_SOCKET_STAT_XVSOCK and CB_SOCKET_STAT_YVSOCK definitions without updating the numbers. From NetBSD | |||
2006-04-26 | not quite working driver for azalia audio (this is essentially AC97 for > 2005) | Jason Wright | |
Just as brain damaged and ill specified. From NetBSD. | |||
2006-04-26 | coverity, covsmerity: no reason to put an overly complex fix in here in | Jason Wright | |
an error case that almost never happens. | |||
2006-04-26 | ATI IXP 600 IDE. Hardware is not generally available yet | Jonathan Gray | |
but should work going by Linux driver. | |||
2006-04-26 | regen | Jonathan Gray | |
2006-04-26 | ATI IXP 600 IDE/SATA ids. | Jonathan Gray | |
2006-04-26 | Use %b in error flag printfs to describe meaning of error bits. | Jonathan Gray | |
requested by deraadt@ | |||
2006-04-26 | And commit the diff from the right system. | Brad Smith | |
2006-04-26 | check for IFF_RUNNING being set before calling nfe_init(). | Brad Smith | |
ok damien@ jsg@ | |||
2006-04-26 | Undo last commit. | Marco Peereboom | |
2006-04-26 | don't return -1, just 1. | Marco Peereboom | |