index
:
src
cvs/HEAD
kms/intel
kms/radeon
master
OpenBSD base system
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
sys
/
dev
/
pci
Age
Commit message (
Expand
)
Author
2006-11-26
regen again. :)
Dimitry Andric
2006-11-26
regen
Dimitry Andric
2006-11-26
Add some Intel 946, 963 and 965 entries.
Dimitry Andric
2006-11-26
Make sure AGP debug printfs actually compile.
Dimitry Andric
2006-11-26
commented out entry for the BCM5709.
Brad Smith
2006-11-26
do not have each net80211 driver define its own rates structures. if they use
Theo de Raadt
2006-11-25
use pci_matchbyid() here, too.
Marc Balmer
2006-11-25
Convert pwdog(4) over to using pci_matchbyid().
Marc Balmer
2006-11-25
The PWDOG1 card can be jumpered to work I/O or memory mapped. Detect
Marc Balmer
2006-11-25
ANSI
Brad Smith
2006-11-25
committ these atfter generating them, reminded by deraadt.
Marc Balmer
2006-11-25
Add support for the Quancom PWDOG1 watchdog timer card.
Marc Balmer
2006-11-25
remove some sk(4) specific media handling code.
Brad Smith
2006-11-25
Split the GEM registers into two halfs and provide a bus_space_handle_t
Brad Smith
2006-11-24
regen
Brad Smith
2006-11-24
add the Broadcom BCM5709 PCI id.
Brad Smith
2006-11-23
Do not attach second port on dual port cards for now.
Mark Kettenis
2006-11-23
Set some more power management bits; makes Yukon-2 XL work somewhat.
Mark Kettenis
2006-11-23
OpenBSD-ify the HW VLAN tag insertion code.
Brad Smith
2006-11-22
add the BCM4312 PCI id.
Brad Smith
2006-11-22
Some more minor cleanup in the PCI hookup.
Marcus Glocker
2006-11-21
fix dmesg printing for the artisea chipset.
Brad Smith
2006-11-21
From Jon Simola <simola@mecha.com>:
Marcus Glocker
2006-11-21
Remove watchdog handler workaround introduced in rev 1.149 which is no
Brad Smith
2006-11-21
style changes. no op.
Brad Smith
2006-11-20
Re-enable HW VLAN tagging.
Brad Smith
2006-11-20
set the IFCAP_VLAN_HWTAGGING capabilities flag.
Brad Smith
2006-11-20
only try to do HW checksum offload for TCP and UDP.
Brad Smith
2006-11-20
Due to an incorrect macro, it appears that the driver has always been
Brad Smith
2006-11-19
Re-enable the Intel i31244 support now that real hardware actually exists.
Brad Smith
2006-11-19
some additional registers for the Artisea chipset operating in DPA mode.
Brad Smith
2006-11-19
In bnx_start, check the used_tx_bd count rather than the descriptors
Brad Smith
2006-11-19
regen
Brad Smith
2006-11-19
add the Broadcom BCM4312 PCI id.
Brad Smith
2006-11-19
Add PCI hookup for malo(4).
Marcus Glocker
2006-11-18
Remove some useless variables/code dealing with cardbus BARs
Alexander Yurchenko
2006-11-18
ixgb_get_buf():
Brad Smith
2006-11-18
add a few comments
Brad Smith
2006-11-18
fix comments
Brad Smith
2006-11-17
Remove code that deals with sk(4) specific phy's that breaks certain msk(4)
Mark Kettenis
2006-11-17
This is a very initial import for a driver which supports the IEEE 802.11
Marcus Glocker
2006-11-17
Add a lower TX threshold value and use this when checking the number of
Brad Smith
2006-11-16
have SK_IS_YUKON only match for first generation Yukon chipsets.
Brad Smith
2006-11-16
when checking for an appropriate revision of chipset use SK_IS_YUKON2
Brad Smith
2006-11-16
remove the small amount of code for Yukon-2 chipsets now that there is msk(4).
Brad Smith
2006-11-15
Correct the WOL magic value and rename NFE_WOL_MAGIC to NFE_WOL_ENABLE.
Brad Smith
2006-11-14
regen
Brad Smith
2006-11-14
add a handful of NVIDIA MCP51 and MCP55 PCI-ISA bridges.
Brad Smith
2006-11-14
don't always leave the mbuf on the if_snd queue if vge_encap() fails.
Damien Bergamini
2006-11-14
Rework the transmit register handling. In em_encap() store the index of
Brad Smith
[next]