summaryrefslogtreecommitdiff
path: root/sys/dev/pci
AgeCommit message (Expand)Author
2006-11-19In bnx_start, check the used_tx_bd count rather than the descriptorsBrad Smith
2006-11-19regenBrad Smith
2006-11-19add the Broadcom BCM4312 PCI id.Brad Smith
2006-11-19Add PCI hookup for malo(4).Marcus Glocker
2006-11-18Remove some useless variables/code dealing with cardbus BARsAlexander Yurchenko
2006-11-18ixgb_get_buf():Brad Smith
2006-11-18add a few commentsBrad Smith
2006-11-18fix commentsBrad Smith
2006-11-17Remove code that deals with sk(4) specific phy's that breaks certain msk(4)Mark Kettenis
2006-11-17This is a very initial import for a driver which supports the IEEE 802.11Marcus Glocker
2006-11-17Add a lower TX threshold value and use this when checking the number ofBrad Smith
2006-11-16have SK_IS_YUKON only match for first generation Yukon chipsets.Brad Smith
2006-11-16when checking for an appropriate revision of chipset use SK_IS_YUKON2Brad Smith
2006-11-16remove the small amount of code for Yukon-2 chipsets now that there is msk(4).Brad Smith
2006-11-15Correct the WOL magic value and rename NFE_WOL_MAGIC to NFE_WOL_ENABLE.Brad Smith
2006-11-14regenBrad Smith
2006-11-14add a handful of NVIDIA MCP51 and MCP55 PCI-ISA bridges.Brad Smith
2006-11-14don't always leave the mbuf on the if_snd queue if vge_encap() fails.Damien Bergamini
2006-11-14Rework the transmit register handling. In em_encap() store the index ofBrad Smith
2006-11-13first round of commits for proper 11b/g protection support:Damien Bergamini
2006-11-11regen. -mojMats O Jansson
2006-11-11Some ATI and NVIDIA devices. -mojMats O Jansson
2006-11-10Pre-allocate the TX DMA maps intead of creating and destroying a DMA mapBrad Smith
2006-11-10Defer setting of the valid bit in the first TX descriptor afterDamien Bergamini
2006-11-10acx(4) doesn't use rssadapt(9).Damien Bergamini
2006-11-10regenBrad Smith
2006-11-10add vendor id for Quicknet Technologies.Brad Smith
2006-11-09no need to check for IFF_ALLMULTI when we just removed the flag...Reyk Floeter
2006-11-09knfReyk Floeter
2006-11-09add multicast filter support instead of using ALLMULTI all the timeReyk Floeter
2006-11-09regenRobert Nagy
2006-11-09Add ATI Radeon X700 SE with secondary;Robert Nagy
2006-11-09remove another useless header and move the 12 register definitions toReyk Floeter
2006-11-09regenBrad Smith
2006-11-09add a HiNT Corp. PCI bridge and some additional Marvell SATA ids.Brad Smith
2006-11-08Make XMAC work on on big-endian systems.Mark Kettenis
2006-11-08Add support for Decision Computer multiport serial cards.Ryan Thomas McBride
2006-11-08syncRyan Thomas McBride
2006-11-08Add Decision Computer Inc and device ids for their PCCOM serial cards.Ryan Thomas McBride
2006-11-08Clean up some of the "magic" constants in the driver, based on theBrad Smith
2006-11-07em_get_buf():Brad Smith
2006-11-07regenJonathan Gray
2006-11-07Add VIA K8M890 ids from a submitted dmesg.Jonathan Gray
2006-11-06noone needs to know about the D0 state change; ok miodTheo de Raadt
2006-11-06set the rx filters after setting the shared data address.Reyk Floeter
2006-11-06add the NVIDIA MCP67 SMBus controller.Brad Smith
2006-11-06regenBrad Smith
2006-11-06add the NVIDIA MCP67 SMBus controller PCI id.Brad Smith
2006-11-06Sync up to Intel's latest FreeBSD em driver (6.2.9). Adds supportBrad Smith
2006-11-05add the MCP67 PATA and SATA PCI ids as well as fixing nforce_chip_map() toBrad Smith