summaryrefslogtreecommitdiff
path: root/sys/dev/pci
AgeCommit message (Expand)Author
2006-11-26avoid extra inclusions; ok jsgTheo de Raadt
2006-11-26revert the Jumbo diff that was commited as part of a wireles drivers commit.Brad Smith
2006-11-26regen again. :)Dimitry Andric
2006-11-26regenDimitry Andric
2006-11-26Add some Intel 946, 963 and 965 entries.Dimitry Andric
2006-11-26Make sure AGP debug printfs actually compile.Dimitry Andric
2006-11-26commented out entry for the BCM5709.Brad Smith
2006-11-26do not have each net80211 driver define its own rates structures. if they useTheo de Raadt
2006-11-25use pci_matchbyid() here, too.Marc Balmer
2006-11-25Convert pwdog(4) over to using pci_matchbyid().Marc Balmer
2006-11-25The PWDOG1 card can be jumpered to work I/O or memory mapped. DetectMarc Balmer
2006-11-25ANSIBrad Smith
2006-11-25committ these atfter generating them, reminded by deraadt.Marc Balmer
2006-11-25Add support for the Quancom PWDOG1 watchdog timer card.Marc Balmer
2006-11-25remove some sk(4) specific media handling code.Brad Smith
2006-11-25Split the GEM registers into two halfs and provide a bus_space_handle_tBrad Smith
2006-11-24regenBrad Smith
2006-11-24add the Broadcom BCM5709 PCI id.Brad Smith
2006-11-23Do not attach second port on dual port cards for now.Mark Kettenis
2006-11-23Set some more power management bits; makes Yukon-2 XL work somewhat.Mark Kettenis
2006-11-23OpenBSD-ify the HW VLAN tag insertion code.Brad Smith
2006-11-22add the BCM4312 PCI id.Brad Smith
2006-11-22Some more minor cleanup in the PCI hookup.Marcus Glocker
2006-11-21fix dmesg printing for the artisea chipset.Brad Smith
2006-11-21From Jon Simola <simola@mecha.com>:Marcus Glocker
2006-11-21Remove watchdog handler workaround introduced in rev 1.149 which is noBrad Smith
2006-11-21style changes. no op.Brad Smith
2006-11-20Re-enable HW VLAN tagging.Brad Smith
2006-11-20set the IFCAP_VLAN_HWTAGGING capabilities flag.Brad Smith
2006-11-20only try to do HW checksum offload for TCP and UDP.Brad Smith
2006-11-20Due to an incorrect macro, it appears that the driver has always beenBrad Smith
2006-11-19Re-enable the Intel i31244 support now that real hardware actually exists.Brad Smith
2006-11-19some additional registers for the Artisea chipset operating in DPA mode.Brad Smith
2006-11-19In bnx_start, check the used_tx_bd count rather than the descriptorsBrad Smith
2006-11-19regenBrad Smith
2006-11-19add the Broadcom BCM4312 PCI id.Brad Smith
2006-11-19Add PCI hookup for malo(4).Marcus Glocker
2006-11-18Remove some useless variables/code dealing with cardbus BARsAlexander Yurchenko
2006-11-18ixgb_get_buf():Brad Smith
2006-11-18add a few commentsBrad Smith
2006-11-18fix commentsBrad Smith
2006-11-17Remove code that deals with sk(4) specific phy's that breaks certain msk(4)Mark Kettenis
2006-11-17This is a very initial import for a driver which supports the IEEE 802.11Marcus Glocker
2006-11-17Add a lower TX threshold value and use this when checking the number ofBrad Smith
2006-11-16have SK_IS_YUKON only match for first generation Yukon chipsets.Brad Smith
2006-11-16when checking for an appropriate revision of chipset use SK_IS_YUKON2Brad Smith
2006-11-16remove the small amount of code for Yukon-2 chipsets now that there is msk(4).Brad Smith
2006-11-15Correct the WOL magic value and rename NFE_WOL_MAGIC to NFE_WOL_ENABLE.Brad Smith
2006-11-14regenBrad Smith
2006-11-14add a handful of NVIDIA MCP51 and MCP55 PCI-ISA bridges.Brad Smith