summaryrefslogtreecommitdiff
path: root/sys/dev/pci
AgeCommit message (Expand)Author
2007-05-28make it compile on i386Reyk Floeter
2007-05-28Enable interrupt holdoff on DP83816 chips. This significantly improvesChris Kuethe
2007-05-28Bump timeout.Alexander Yurchenko
2007-05-28Decrease max number of commands to 128.Alexander Yurchenko
2007-05-28Start adding copperhead chipset support. Not tested at all.Alexander Yurchenko
2007-05-28Add more MII glue. Still not working but I want to get this into the tree.Claudio Jeker
2007-05-28Fix timeout loop in ips_poll().Alexander Yurchenko
2007-05-28Better debug printf.Alexander Yurchenko
2007-05-28Initial bits of if_media and mii support.Claudio Jeker
2007-05-28use memcpy when copying to/from the fifos, apparently gcc can do a betterDavid Gwynne
2007-05-28Provide a separate DMA-able command frame buffer for each CCB to preventAlexander Yurchenko
2007-05-28Sprincle some more scsi_done().Alexander Yurchenko
2007-05-28Release CCB before calling scsi_done(). Thanks dlg@ for the tip.Alexander Yurchenko
2007-05-27Add basic error detection.Alexander Yurchenko
2007-05-27Better debug printf.Alexander Yurchenko
2007-05-27A completely rewritten ips driver. Still work in progress but alreadyAlexander Yurchenko
2007-05-27Attach ifp to che(4) by cheating a bit -- at least in dlg's opinion.Claudio Jeker
2007-05-27move bus_space funcs out of the way, sprinkle some knf.David Gwynne
2007-05-27shuffle things around a bit. this organises the code more like tht.David Gwynne
2007-05-27Implement the PDV eeprom read functions plus some other minor cleanup.Claudio Jeker
2007-05-26chop ETHER_ALIGN off the size of the packet we tell the hw we can doDavid Gwynne
2007-05-26ETHER_ALIGN rx mbuf so that it works on strict alignment archs. OK dlg@Claudio Jeker
2007-05-26correctly byteswap the mac address when moving it on and off teh cardDavid Gwynne
2007-05-26add some htole64sReyk Floeter
2007-05-26wrap the debug macro in do { } while (0)David Gwynne
2007-05-26reformat the softc to make it look like everything else we have.David Gwynne
2007-05-26get rid of #define sc_if sc_arpcom.ac_ifDavid Gwynne
2007-05-26this isnt netbsdDavid Gwynne
2007-05-26tx descriptor fixesReyk Floeter
2007-05-26First bits of che(4) a driver for various Chelsio 10Gb Ethernet cards.Claudio Jeker
2007-05-26one extern seems to be better than 20 for ifqmaxlen; ok krwJason Wright
2007-05-26separate the attach information from the status information with a colon.Reyk Floeter
2007-05-26cleanupReyk Floeter
2007-05-26increase the delay to wait for the firmware to become ready, the card needsReyk Floeter
2007-05-26update some registers and the tx descriptor layout to match the latestReyk Floeter
2007-05-26regenClaudio Jeker
2007-05-26Add Chelsio 10Gb Ethernet card product IDs. OK reyk@Claudio Jeker
2007-05-26More comment typos from Diego Casati. Including winners like funtion, allmost,Kenneth R Westerback
2007-05-25"interupt" -> "interrupt" in various comments. Mostly from Diego Casati.Kenneth R Westerback
2007-05-22Add the BCM5709 PCI device Id. It is disabled for now since we do notReyk Floeter
2007-05-22syncReyk Floeter
2007-05-22Add another bnx(4) PCI Id (BCM5709 SerDes 1000base-SX)Reyk Floeter
2007-05-22adress -> addressJasper Lievisse Adriaanse
2007-05-22%z in printf(9) is not the same as %z in printf(3). Change to %luRay Lai
2007-05-22Use BNX_PRINTF instead of printf with missing argument.Ray Lai
2007-05-22regenDavid Gwynne
2007-05-22mtu and i found an emulex lp982 in tokyoDavid Gwynne
2007-05-21Implement deep interrupt swizzling by mapping all four PCI interrupt pinsMark Kettenis
2007-05-21sync; add new device id to the bce(4) driverReyk Floeter
2007-05-21add new bce(4) device idReyk Floeter
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 19:19:38 +0000