summaryrefslogtreecommitdiff
path: root/sys/dev/pci
AgeCommit message (Expand)Author
2007-05-04Initialize the sis_timeout early in attach instead of sis_init.Artur Grabowski
2007-05-04when it does not compile we KNOW it was not tested. come onTheo de Raadt
2007-05-04swap the port register table arrays to make it better readble and fix someReyk Floeter
2007-05-04do not call vic_init() on ENETRESET in the ioctl handler, useReyk Floeter
2007-05-03allocate DMA memory for the per-port Rx, Tx (command), and Status ringReyk Floeter
2007-05-03a nxb NIC can have up to 4 nx ports and the latest firmware uses someReyk Floeter
2007-05-03Fix a typo that was preventing the full device name from being printed.Deanna Phillips
2007-05-03missed an struct lock to struct rwlock in the softc.David Gwynne
2007-05-03regenJonathan Gray
2007-05-03Philips/NXP ISP156x USB controllers as found in ONDA Communication H600.Jonathan Gray
2007-05-03The ring replenish threshold change needed to work around a hardwareTom Cosgrove
2007-05-03convert lockmgr style locks to rwlocks.David Gwynne
2007-05-03convert lockmgr to rwlocksDavid Gwynne
2007-05-02carefully set the correct memory windows (crb/pci) and add a dummyReyk Floeter
2007-05-02- Add support for handling unsolicited events (based on NetBSD).Deanna Phillips
2007-05-02the 5754 and 5787 share the same ASIC ID, make the crazy strings list bothDavid Gwynne
2007-05-02do { } while (0) for the debug macrosDavid Gwynne
2007-05-02Another VIA VT8237A SATA.Jonathan Gray
2007-05-01some fixesReyk Floeter
2007-05-01export the temperature sensor found on the nx(4) NICs. it reports degCReyk Floeter
2007-05-01fix the nx CRBINIT (initial register values from flash) and disableReyk Floeter
2007-05-01shuffle some code and add additional states in the reset path. use aReyk Floeter
2007-05-01do not write every byte of the firmware to the same address, incrementReyk Floeter
2007-05-01Missing braces in vge_tick(). Fixes link state announcements.Can Erkin Acar
2007-05-01regenJonathan Gray
2007-05-01VIA P4M890 ids from Graeme Lee <graeme@omni.net.au>Jonathan Gray
2007-05-01fix some register offsetsReyk Floeter
2007-05-01implement the soft reset of the hardware according to section 3.5.6 ofReyk Floeter
2007-04-30better handling of the firmware state madnessReyk Floeter
2007-04-30fix shift by portReyk Floeter
2007-04-30run the nx_tick function every second to check the link state, even ifReyk Floeter
2007-04-30read the per-port link stateReyk Floeter
2007-04-30initial code for firmware loading and initialization. it is used byReyk Floeter
2007-04-30add missing newline in printfReyk Floeter
2007-04-30decrease the delay in the register wait loop again and add a debugReyk Floeter
2007-04-30move the firmware validation to a mountroot hook to allow loading ofReyk Floeter
2007-04-30fix dmesg; ok dlgTheo de Raadt
2007-04-29missing arguments in a couple of printfs.David Gwynne
2007-04-29Nadav Shemer of Tehuti Networks is magical.David Gwynne
2007-04-29clocks and pll register bitsDavid Gwynne
2007-04-29we dont want to completely fill fifos, so leave a gap when we calculateDavid Gwynne
2007-04-29when we post a fifo we're giving the dma mem back to the hardware, so weDavid Gwynne
2007-04-29when completing a tx pkt, put it back on the tx free list, not the rx one.David Gwynne
2007-04-29Match on ATI IXP/SB600 as well.Jonathan Gray
2007-04-29Match on VT8237A/VT8251/CX700 like the equivalent Linux driver does.Jonathan Gray
2007-04-28initialize and bootstrap the device and enable the firmwareReyk Floeter
2007-04-28spacing (cleanup the code before i leave the room)Reyk Floeter
2007-04-28attach the available ports and print the lladdr (no operation yet).Reyk Floeter
2007-04-28validate the firmware version, this driver requires 3.4.xx (3.4.31).Reyk Floeter
2007-04-28add different flags for debug messages to minimize the noise.Reyk Floeter
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-17 02:15:42 +0000