summaryrefslogtreecommitdiff
path: root/sys/dev/pci
AgeCommit message (Expand)Author
2007-10-28let vic attach to the virtual pcnet hardware in vmware.David Gwynne
2007-10-27work around a chip bug on the ati ixp600 ahci controller. diff mostly fromDavid Gwynne
2007-10-27the arc fimware can be configured with a password that is used toDavid Gwynne
2007-10-26Add emulated mono support.Deanna Phillips
2007-10-25Factor out common code to update the timedelta sensor intoMarc Balmer
2007-10-24Define a bitmaks of status bits we're interested in, output/log allMarc Balmer
2007-10-23- use endian-specific conversions, instead of relying onJacob Meuser
2007-10-23Don't spam the console when there is no antenna connected.Marc Balmer
2007-10-23Sort the PCI id table and remove a comment which is no longer true.Brad Smith
2007-10-23shrink dmesg output to one line that shows irq and the ethernet address.David Gwynne
2007-10-23regenBrad Smith
2007-10-23correct a typo, BCM4238 -> BCM4328.Brad Smith
2007-10-23regenBrad Smith
2007-10-23add the Broadcom BCM5723 PCI id.Brad Smith
2007-10-22only output on situations where power state is D3. unify the message inFederico G. Schwindt
2007-10-22the codec is not readable. If we try to read it the ac-link enters a kind ofAlexandre Ratchov
2007-10-22arc supports more than just SATA hbas, so dont say the ports are alwaysDavid Gwynne
2007-10-22Add SUNIX 4036A 2 port serial card. Sadly it does not conform toOtto Moerbeek
2007-10-22Use pci_set_powerstate(), shrinking the code and unifying the differentFederico G. Schwindt
2007-10-22Add pci_set_powerstate() to change the pm state for a given device.Federico G. Schwindt
2007-10-21bring device back from power save mode if needed. fixes a problem reportedFederico G. Schwindt
2007-10-21Allow for the adjustment of the number of RX descriptorsBrad Smith
2007-10-20Remove unneeded scope declarations that shadows existing ones. krw@ okFederico G. Schwindt
2007-10-20replace auich's DMA and interrupt handling with code from NetBSD'sJacob Meuser
2007-10-19regenBrad Smith
2007-10-19add the Broadcom BCM4328 PCI id.Brad Smith
2007-10-18Initio INIC-941 works as well; ok miod@Otto Moerbeek
2007-10-17Add the Intel ICH9 chipset.Brad Smith
2007-10-17Add the Intel ICH9 chipset.Brad Smith
2007-10-17use ansi declarations and rename gdt to sc to avoid shadows and followFederico G. Schwindt
2007-10-15enable ADDMULTI and DELMULTI in the ioctl handler now that the thtDavid Gwynne
2007-10-15regenBrad Smith
2007-10-15add some more Intel ICH9 PCI to ISA bridges.Brad Smith
2007-10-15regenBrad Smith
2007-10-15add the Intel ICH9 PCI ids.Brad Smith
2007-10-15regenBrad Smith
2007-10-15add the PCI ids for the Broadcom BCM5761/BCM5761E/BCM5764 and BCM5784Brad Smith
2007-10-14The spec says to wait 40 microseconds for the run bit to clear beforeDeanna Phillips
2007-10-14audio(4)-compatible mixer items for ALC883.Deanna Phillips
2007-10-13Add support for BCM5906.Mark Kettenis
2007-10-13Add Yukon-2 PHY powerdown bits.Mark Kettenis
2007-10-12regenBrad Smith
2007-10-12Add some more Intel em(4) PCI ids.Brad Smith
2007-10-11Make BGE_JUMBO_FRAMELEN big enough to include vlan tag. Fixes problems withMark Kettenis
2007-10-11syncTheo de Raadt
2007-10-11Add device ID used by Commell MP-954GPSStuart Henderson
2007-10-10Fix some obviously bogus code in vge_newbuf(). Should fix PR 5582.Mark Kettenis
2007-10-10Rework the debug dmesg to perform a more complete codec dump.Deanna Phillips
2007-10-10regenDavid Gwynne
2007-10-10add the pci product id for the Mellanox ConnectX EN adapters.David Gwynne
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 06:34:53 +0000