| Age | Commit message (Expand) | Author |
|---|
| 2009-05-11 | add Edimax PCI vendor ID and Edimax RT2860 product IDs. | Damien Bergamini |
| 2009-05-11 | new PCI IDs for 6000 series. | Damien Bergamini |
| 2009-05-11 | regen | Damien Bergamini |
| 2009-05-11 | new PCI IDs for Intel Wifi Link 6000 2x2 | Damien Bergamini |
| 2009-05-11 | fix for some 6000 adapters that have a One Time Programmable (OTP) ROM | Damien Bergamini |
| 2009-05-11 | sync setting of the capinfo field of assoc req frames w/ net80211. | Damien Bergamini |
| 2009-05-11 | regen | Jonathan Gray |
| 2009-05-11 | add some devices from submitted dmesgs | Jonathan Gray |
| 2009-05-11 | in the case where mbufs had to be copied _and_ checksums were enabled, | Stuart Henderson |
| 2009-05-11 | preliminary parts for hw vlan tag insertion/removal, ideas gleaned from | Stuart Henderson |
| 2009-05-11 | On VT6105M, use hardware IP, TCP and UDP checksums in and out. Tested on | Stuart Henderson |
| 2009-05-11 | Start using VR_RXSTAT_RX_OK instead of VR_RXSTAT_ERR (It exists | Stuart Henderson |
| 2009-05-11 | remove local copy of vendor id/device id, there's nothing wrong with | Stuart Henderson |
| 2009-05-11 | Rework the pcigart stuff somewhat. | Owain Ainsworth |
| 2009-05-10 | Change agp attach (again) so that the driver passes in the aperture size. | Owain Ainsworth |
| 2009-05-10 | In preparation for using agp as a bus_dma backend for drm, convert the bind_page | Owain Ainsworth |
| 2009-05-10 | change agp driver attach so that the driver passes in the base address | Owain Ainsworth |
| 2009-05-10 | - fix whitespace problems (introduces no change with diff -w) | Stuart Henderson |
| 2009-05-10 | - use nitems() rather than handrolled version. | Stuart Henderson |
| 2009-05-10 | Remove config register gpio definitions for older chips, gpio mii | Stuart Henderson |
| 2009-05-10 | - change device matching to use a quirks table. | Stuart Henderson |
| 2009-05-08 | The default initiator value is 0 on sgi IP27, IP30 and IP35 systems. Since | Miod Vallat |
| 2009-05-08 | add support HT mixer knobs (ie routing control). Allow monitoring | Alexandre Ratchov |
| 2009-05-08 | add support for the ak4358 DAC used in ESI Julia cards. There are | Alexandre Ratchov |
| 2009-05-08 | print card model, the number of inputs and the number of outputs | Alexandre Ratchov |
| 2009-05-08 | add support for m-audio delta 1010, delta 66 and delta 44 since | Alexandre Ratchov |
| 2009-05-08 | rename few functions and macros, fix style | Alexandre Ratchov |
| 2009-05-08 | expose HT mixer; since neither the digital mixer nor codec | Alexandre Ratchov |
| 2009-05-08 | use the number of channels rather than the number of stereo dacs/adcs, | Alexandre Ratchov |
| 2009-05-08 | hide controls corresponding to missing dacs, adcs or spdifs. | Alexandre Ratchov |
| 2009-05-07 | Missed removing a printf argument. | Ariane van der Steldt |
| 2009-05-07 | Make amas less chatty in debug mode by not mentioning unused ranges and | Ariane van der Steldt |
| 2009-05-07 | Amas(4) on some machines has ranges with base > limit. Treat this as | Ariane van der Steldt |
| 2009-05-07 | Move amas device from arch/amd64 to dev/pci and enable it in i386 as well. | Ariane van der Steldt |
| 2009-05-06 | configure the input and output ports in trigger_{input,output} instead | Jacob Meuser |
| 2009-05-06 | - explicitely disable some s/pdif features (ac3 passthrough, 24 and 32-bit | Jacob Meuser |
| 2009-05-05 | Add extents for prefetchable memory mapped I/O. Should remove conflict | Mark Kettenis |
| 2009-05-04 | put codec-specific mixer bits in their own routines and | Alexandre Ratchov |
| 2009-05-03 | reorganize mixer bits to allow, supporting codec-dependent mixer | Alexandre Ratchov |
| 2009-05-01 | initialize the mic ADC index before possibly setting it. | Jacob Meuser |
| 2009-05-01 | recognize several more IDT/Sigmatel codecs. IDs taken from the codecs' | Jacob Meuser |
| 2009-05-01 | make mic ADC selection a little more like speaker DAC selection | Jacob Meuser |
| 2009-05-01 | allow jack sensing to mute the DAC the speaker is connected to by | Jacob Meuser |
| 2009-05-01 | try to get built-in speakers connected to a DAC no other output pin | Jacob Meuser |
| 2009-05-01 | fix a couple bugs when finding sole connections | Jacob Meuser |
| 2009-04-30 | The previous change did not always update vr_link on rlphy(4) based | Marco Pfatschbacher |
| 2009-04-29 | Apply the cleanup stick. | Owain Ainsworth |
| 2009-04-29 | Enable hardware vlan tagging/stripping and disable the | Jonathan Gray |
| 2009-04-29 | regen | Stuart Henderson |
| 2009-04-29 | add some Attansic, Broadcom and a JMicron device. from Brad, ok reyk | Stuart Henderson |
