summaryrefslogtreecommitdiff
path: root/sys/dev/pci
AgeCommit message (Expand)Author
2007-11-24First step towards PCI Express/ExpressCard hotplug. Unplug should work onMark Kettenis
2007-11-24The Sigmatel codec id 7662 looks identical to STAC7661 and works fine withDeanna Phillips
2007-11-23Don't do anything in the shutdownhook if the registers aren't mapped.Mark Kettenis
2007-11-23Check for invalid dev indices, which could get here through ioctl.Deanna Phillips
2007-11-23feng shuiDavid Gwynne
2007-11-21Collect subid #defines at the top.Deanna Phillips
2007-11-19pairwise keys always have an ID equal to 0.Damien Bergamini
2007-11-19all TX rings have the same fixed size (256 entries) and this is notDamien Bergamini
2007-11-19When ignoring whether FR turns on or not, we should still set FRE,Christopher Pascoe
2007-11-18Add a few Cassini+ registers.Mark Kettenis
2007-11-17Allow pci_get_capability to decode capabilities for PCI bridges.Brad Smith
2007-11-17update the physical address of the RX buffer after bus_dmamap_load()Damien Bergamini
2007-11-17fix reading of EEPROM for some adapters.Damien Bergamini
2007-11-17Disable jumbo allocator until the low number of buffers caseJonathan Gray
2007-11-17Rename fiber TBI flag from BGE_TBI to BGE_PHY_FIBER_TBI. No functional change.Brad Smith
2007-11-16No need to mention which codec is being used if there's only one.Deanna Phillips
2007-11-15match expresscard ralTheo de Raadt
2007-11-15syncTheo de Raadt
2007-11-15ralink N expresscard modelTheo de Raadt
2007-11-15New driver for Ralink RT2860 chipset.Damien Bergamini
2007-11-14Unknown codecs don't have a name field, so print what we read fromDeanna Phillips
2007-11-14add the Marvell 88E8042 and 88E8072 PCI ids.Brad Smith
2007-11-14regenBrad Smith
2007-11-14- add the ATI Radeon X1950 Pro video adapter.Brad Smith
2007-11-14less obnoxious dmesgDeanna Phillips
2007-11-14regenBrad Smith
2007-11-14- add the Intel G33 PCIe bridge.Brad Smith
2007-11-12Don't use utc_off when using the hires timestamp.Marc Balmer
2007-11-12repair input vs output confusionJacob Meuser
2007-11-12syncTheo de Raadt
2007-11-12correct a ricoh labelTheo de Raadt
2007-11-11Remove all code that prints to the console or writes to the log afterMarc Balmer
2007-11-11bring in ~7 years worth of improvements and bug fixes from NetBSDJacob Meuser
2007-11-09Add Exar UARTs XR17C152, XR17C154 and XR17C158.Federico G. Schwindt
2007-11-09regen.Federico G. Schwindt
2007-11-09Add Exar UARTs XR17C152, XR17C154 and XR17C158.Federico G. Schwindt
2007-11-07Fix a comment.Marc Balmer
2007-11-07regenBrad Smith
2007-11-07rename the Intel 82452 hostbridge chipset entry.Brad Smith
2007-11-06Generalize most of the apple-specific code, since it works fine onDeanna Phillips
2007-11-05Add support for the Meinberg PEX511 PCI Express DCF77 radio clock.Marc Balmer
2007-11-05regen.Marc Balmer
2007-11-05Add the Meinberg PEX511 PCI-express DCF77 radio clock.Marc Balmer
2007-11-05regen.Owain Ainsworth
2007-11-05add "82452KX/GX Orion Extended Express Processor to PCI Bridge", from NetBSD.Owain Ainsworth
2007-11-05recognise (and use) ahci 1.2 controllers.David Gwynne
2007-11-05scsi_done() must be called at SPLBIO.Kenneth R Westerback
2007-11-05wait for the marvell firmware to become ok.David Gwynne
2007-11-05audio encoding conversion cleanupJacob Meuser
2007-11-04Add support for the Meinberg PCI509 5V DCF77 time signal station receiver.Marc Balmer