| Age | Commit message (Expand) | Author |
|---|
| 2006-12-11 | On i386, swizzle interrupts for devices for which we don't have explicit | Mark Kettenis |
| 2006-12-11 | do not bus_space_map devices which are at address 0; ok kettenis | Theo de Raadt |
| 2006-12-11 | oops, we want to return when everything goes well in ahci_attach, rather | David Gwynne |
| 2006-12-11 | remove the argument to all the port registers that say which port you want | David Gwynne |
| 2006-12-11 | dont stash the implemented ports map, im going to use a different | David Gwynne |
| 2006-12-11 | define the command structs used by the ports. | David Gwynne |
| 2006-12-11 | pull the wrapper for allocations of dma mem with a single segment in from | David Gwynne |
| 2006-12-11 | oops, too far for the match/attach funcs | David Gwynne |
| 2006-12-11 | give the function prototypes a bit more room for the return type. | David Gwynne |
| 2006-12-11 | Only disarm the watchdog if we really want to, not before each re-trigger. | Marc Balmer |
| 2006-12-11 | Shorten the code, but no functional changes. | Marc Balmer |
| 2006-12-11 | per port register definitions | David Gwynne |
| 2006-12-11 | fix %b format string now that deraadt fixed printf | David Gwynne |
| 2006-12-11 | stash the field showing which ports are hooked up, and dump it if verbose | David Gwynne |
| 2006-12-11 | if ahci debug and verbose output is enabled, then dump the cap register. | David Gwynne |
| 2006-12-10 | regen | Dimitry Andric |
| 2006-12-10 | Add ATI RS200M AGP. | Dimitry Andric |
| 2006-12-09 | sigh, split the bus space mapping and interrupt hookup apart so i can | David Gwynne |
| 2006-12-09 | reset the hba and set the enable bit. | David Gwynne |
| 2006-12-09 | figure out which revision of ahci we're trying to use and print it out. | David Gwynne |
| 2006-12-09 | split the mapping of the pci resources out of the main attach func | David Gwynne |
| 2006-12-09 | add wrappers for safe access to the register space. stolen from arc (which | David Gwynne |
| 2006-12-09 | add macros for debug shizz | David Gwynne |
| 2006-12-09 | bit definitions for the cap and ghc registers | David Gwynne |
| 2006-12-09 | registers for hba control | David Gwynne |
| 2006-12-09 | the start of a driver for ahci controllers. this does nothing but map the | David Gwynne |
| 2006-12-08 | regen | Gordon Willem Klok |
| 2006-12-08 | Add the Broadcom BCM5787F PCI id. | Gordon Willem Klok |
| 2006-12-08 | From Jon Simola <simola@mecha.com>: | Marcus Glocker |
| 2006-12-07 | regen | Michael Knudsen |
| 2006-12-07 | Add Broadcom BCM5787F. | Michael Knudsen |
| 2006-12-06 | - Move TX ring full sanity check further up and check the number of DMA | Reyk Floeter |
| 2006-12-06 | Implement em_read_pcie_cap_reg(), where we set the max read size on | Reyk Floeter |
| 2006-12-06 | - de-static | Martin Reindl |
| 2006-12-06 | replace Adaptec AIC-6915 Starfire driver with the fully bus_dma(9)-able | Martin Reindl |
| 2006-12-06 | From Jon Simola <simola@mecha.com>: | Marcus Glocker |
| 2006-12-04 | report full/half duplex state for non-MII interfaces | Reyk Floeter |
| 2006-12-03 | Re-enable RX engine every time otherwise it occasionally | Alexander Yurchenko |
| 2006-12-03 | Set sis_stopped=1 early on attach and reset it later in sis_init(). | Alexander Yurchenko |
| 2006-12-03 | always assume full duplex state if the interface is up... what does | Reyk Floeter |
| 2006-12-03 | re-add a tiny little #ifdef VIC_DEBUG, used to compare the vic(4) | Reyk Floeter |
| 2006-11-29 | From Jon Simola <simola@mecha.com>: | Marcus Glocker |
| 2006-11-29 | Add an unpack_attr function to struct wsdisplay_emulops, to match the | Miod Vallat |
| 2006-11-29 | Limit the number of openings to 1 for now, there're still bugs. | Alexander Yurchenko |
| 2006-11-29 | Report about command error | Alexander Yurchenko |
| 2006-11-29 | ips firmware runs on a little-endian cpu so do endian conversion | Alexander Yurchenko |
| 2006-11-29 | Add some constants. | Alexander Yurchenko |
| 2006-11-29 | Add a new member to struct wsemuldisplaydev_attach_args, for a frame buffer | Miod Vallat |
| 2006-11-29 | Add another ID to match for the 88W8310 chip. | Marcus Glocker |
| 2006-11-29 | oops, i missed a closing brace with the scsibus_attach_args fixup. | David Gwynne |
