src - OpenBSD base system

Age	Commit message (Collapse)	Author
2002-07-09	move common declarations to if_wivar.h; mickey@ and millert@ ok.	Federico G. Schwindt

2002-07-01	when printing the size, use what we have map'ed, not what's in the	Federico G. Schwindt
	configuration.
2002-06-25	Back out my change to pass in sc_dev.dv_xname to pcmcia_intr_establish().	Todd C. Miller
	It screws up printing in dmesg and doesn't actually help anything since interupts in "vmstat -i" show up as pcmcia, not wi or an*.
2002-06-22	Add new flag, WI_FLAGS_BUS_PCMCIA and mark pcmcia attachment as such.	Federico G. Schwindt
	Replace ugly kludge with a macro that tests on sparc if it's pcmcia and tries to deal with it correctly (card mapped as be). This makes possible to have wi at pcmcia and pci on sparc64; from theo and myself. Tested with the PLX adapter and the SBus pcmcia bridge. millert@ ok.
2002-06-21	add support for Netgear MA401RA (Prism-2.5)	Henning Brauer

2002-06-20	Add ELSA / ZCOMAX XI-325 (and XI-325H); Ken Simpson	Todd C. Miller

2002-06-09	Pass in the device name to pcmcia_intr_establish() instead of ""	Todd C. Miller

2002-06-09	a step towards consistancy; in general:	Todd T. Fries
	'struct arpcom foo' -> 'struct arpcom sc_arpcom' ok itojun@
2002-06-08	print address; millert@ ok.	Federico G. Schwindt

2002-05-28	add an id for nokia c110/c111; attach both w/ the if_wi_pcmcia ↵	Michael Shalayeff
	(prism1-prism2 clones, according to linux)
2002-04-17	Clear flags indicating whether or not wi or hostap is active as	Todd C. Miller
	early as possible. Also the timeout_del() in wi_stop() to before we disable wi(4) so it doesn't fire at the wrong time. Joint effort between mickey@ and myself.
2002-04-07	Don't reset COR in wi_reset(), break it out into its own function and	Todd C. Miller
	only call it from wi_attach() and wi_pcmcia_activate() (ie: just once). It would be nicer to have the COR reset be part of the bus-specific code but we need to know whether or not we have a Lucent card since old Lucent firmware revs get messed up on a COR soft reset. Even with the COR reset we still need to avoid initializing Symbol cards more than once. However, we do want to do a reset after returning from suspend. Therefore, rename wi_gone to wi_flags and store both the attach and init status in it. wi_reset() now checks wi_flags to see if the card should be initialized in the Symbol case. Info on initializing Symbol cards once from NetBSD.
2002-04-06	For PLX-based bridge cards, move printing of pcmcia card CIS strings	Todd C. Miller
	out of generic wi_attach() and into wi_pci_attach(). This means we can't print the CIS info for embedded cards like the NCP130 but since those don't have a "real" pcmcia card in them this is really not a problem. Also check to see that there is actually a pcmcia present and give and error if not. CIS magic number taken from the Linux orinoco driver; there may be a better way to do this.
2002-04-06	Add support for Symbol cards and printing of the primary station	Todd C. Miller
	firmware version. Adapted from NetBSD and the Linux orinoco driver. The Symbol firmware requires that we do a COR soft reset before initializing the card in wi_reset(). Also, setting WI_RID_ROAMING_MODE caused the Symbol card to go into a strange (non-working) mode with firmware 2.x.x. There are some other Symbol additions/oddities that will need to be addressed in the future.
2002-04-06	actiontec wlan support; form jason@ackley.net via pr#2526	Michael Shalayeff

2002-04-05	Actually set wi_gone when we detach, based on what the an driver does.	Todd C. Miller

2002-04-04	wi_init() now takes a struct wi_softc * not a void * since an sc pointer	Todd C. Miller
	is available everywhere wi_init() is called. deraadt@ OK
2002-04-02	3Com AirConnect 3CRWE777A is really just a 3CRWE737A in disguise.	Todd C. Miller
	They use 3CRWE777A because that is the part number for the PCI adapter it comes with but the card can be used w/o it.
2002-03-29	Add Proxim RangeLAN-DS PCMCIA card (model 8430); Paul M. Hirsch	Todd C. Miller

2002-03-28	new linksys wpc11; okay mickey@	Niels Provos

2002-03-14	First round of __P removal in sys	Todd C. Miller

2002-01-22	dup wi_pcmcia_attach(); from maurice@amaze.nl	Michael Shalayeff

2002-01-04	match on ericsson wlan; from lha@stacken.kth.se, pr 2295	Michael Shalayeff

2001-12-05	match on Symbol's Spectrum24 pcmcia/prism2, form netbsd	Michael Shalayeff

2001-11-27	match on buffalo and emtac wavelans; from netbsd	Michael Shalayeff

2001-11-20	match on linksys iwn; from netbsd	Michael Shalayeff

2001-11-02	match on intel pro/wireless 2011, from netbsd	Michael Shalayeff

2001-10-28	match on elsa cf wireless lan	Michael Shalayeff

2001-10-25	match on corega pccb-11	Michael Shalayeff

2001-10-25	match on gemtek	Michael Shalayeff

2001-08-17	quieten pcmcia/cardbus interrupt handling at unsuspend time	Theo de Raadt

2001-06-23	Disable interupts before establishing them to avoid a race.	Todd C. Miller

2001-06-11	For PCI attachments print the CIS strings since otherwise all we have	Todd C. Miller
	is info on the PCI -> PCMCIA dumb bridge and not the card itself.
2001-06-07	no longer need bogus Linksys WPC11 entry now that we autodetect prism vs. lucent	Todd C. Miller

2001-06-07	probe prism2 chips based on the probed card id, not cis	Michael Shalayeff

2001-06-06	PCI shim for if_wi.c as promised. Magic for setting the PLX up	Todd C. Miller
	correctly take from the FreeBSD driver and explained by imp@ Currently this is hard-coded for PrismII cards but that will change when the PrismII auto-detect code is added to if_wi.c. Tested with a LinkSys WPC11 in a Global Sun GL24110P02 (aka LinSys WDT11)
2001-05-22	Vendor and prodid are 16-bits, not 32.	Federico G. Schwindt

2001-05-15	Split wi(4) into bus-dependent and bus-independent bits similar to	Todd C. Miller
	an(4) -- no real code changes at this point. Rename if_wavelan_ieee.h to if_wi_ieee.h while I'm at it and create an if_wivar.h similar to NetBSD. PCI adaptors exist that are not true PCMCIA controllers so wi(4) @ PCI is possible (though the code is not working yet ;-).