summaryrefslogtreecommitdiff
path: root/sys/dev/pcmcia
AgeCommit message (Collapse)Author
2001-06-25ether_input_mbuf() conversion.Federico G. Schwindt
2001-06-23Remove repeated ethernet constants; use if_ether.h for it instead.Federico G. Schwindt
2001-06-23Disable interupts *before* establishing them to avoid a race.Todd C. Miller
2001-06-12regenDavid Leonard
2001-06-12Add Archos MiniCD (comes with some Toshiba laptops). ok csapuntz,fgschDavid Leonard
2001-06-12Yet another entry for the Netgear FA410TXC; fromFederico G. Schwindt
Brandin L Claar <claar@arl.psu.edu>.
2001-06-11For PCI attachments print the CIS strings since otherwise all we haveTodd C. Miller
is info on the PCI -> PCMCIA dumb bridge and not the card itself.
2001-06-08missed one; pointed out by ben fleis <ben@monkey.org>Michael Shalayeff
2001-06-08use pragma instead of attributing every and each struct, some spacesMichael Shalayeff
2001-06-07regenTodd C. Miller
2001-06-07no longer need bogus Linksys WPC11 entry now that we autodetect prism vs. lucentTodd C. Miller
2001-06-07probe prism2 chips based on the probed card id, not cisMichael Shalayeff
2001-06-06PCI shim for if_wi.c as promised. Magic for setting the PLX upTodd C. Miller
correctly take from the FreeBSD driver and explained by imp@ Currently this is hard-coded for PrismII cards but that will change when the PrismII auto-detect code is added to if_wi.c. Tested with a LinkSys WPC11 in a Global Sun GL24110P02 (aka LinSys WDT11)
2001-06-04Linksys PCM100 support; from Matt Behrens <matt@zigg.com>.Federico G. Schwindt
2001-05-28Remove FA410TX from the invalid list; it's confusing and should be matchedFederico G. Schwindt
using the linksys etherfast entry; aaron@ ok.
2001-05-28regen.Federico G. Schwindt
2001-05-28Remove FA410TX CIS, this should be matched as linksys etherfast; aaron@ ok.Federico G. Schwindt
2001-05-27Netgear FA410TXC; thanks to Loic Tortay <loict@bougon.net>.Federico G. Schwindt
2001-05-27regen.Federico G. Schwindt
2001-05-27Netgear FA410TXC; from Loic Tortay <loict@bougon.net>.Federico G. Schwindt
2001-05-25Wisecom T210CT; from Daniel Lucq <dlucq@ieee.org>.Federico G. Schwindt
2001-05-25regen.Federico G. Schwindt
2001-05-25Wisecom T210CT; from Daniel Lucq <dlucq@ieee.org>.Federico G. Schwindt
2001-05-24Check malloc() returns, from tedu@heorot.stanford.edu, ok aaron@Angelos D. Keromytis
2001-05-22Vendor and prodid are 16-bits, not 32.Federico G. Schwindt
2001-05-22A few more entries from NetBSD.Federico G. Schwindt
2001-05-22regen.Federico G. Schwindt
2001-05-22More products from NetBSD.Federico G. Schwindt
2001-05-22Corega FastEther TXD.Federico G. Schwindt
2001-05-22regen.Federico G. Schwindt
2001-05-22Corega Fast Ether TXD; from NetBSD.Federico G. Schwindt
Put Corega products together.
2001-05-22Add Synergy21 S21810 support; from NetBSD.Federico G. Schwindt
Remove flags, it's not used.
2001-05-22regen.Federico G. Schwindt
2001-05-22Add Synergy21 S21810; from NetBSD.Federico G. Schwindt
2001-05-15Split wi(4) into bus-dependent and bus-independent bits similar toTodd C. Miller
an(4) -- no real code changes at this point. Rename if_wavelan_ieee.h to if_wi_ieee.h while I'm at it and create an if_wivar.h similar to NetBSD. PCI adaptors exist that are not true PCMCIA controllers so wi(4) @ PCI is possible (though the code is not working yet ;-).
2001-05-14if we are prism2 print soMichael Shalayeff
2001-04-23regenTodd C. Miller
2001-04-23The Linksys WPC11 uses the Lucent Wavelan vendor and product IDs butTodd C. Miller
it is a Prism2 card. We add fake entries in pcmciadevs and the wi_pcmcia_product list so that it gets treated as Prism2.
2001-04-19Remove extra arg; from Loic Tortay <loict@bougon.net> via aaron@.Federico G. Schwindt
deraadt@ ok.
2001-04-19When printing the address/size, use the correct value 32, not 16.Federico G. Schwindt
2001-04-18Support the Corega FEther PCC-TXF card; taka@trans-nt.com. Addresses PR/1777.Aaron Campbell
2001-04-18regenAaron Campbell
2001-04-18Recognize the Corega FEther PCC-TXF card.Aaron Campbell
2001-04-08addtron card has prism2 in it, it's justthat cis was not given properlyMichael Shalayeff
2001-04-08regenMichael Shalayeff
2001-04-08correct cis for addtronMichael Shalayeff
2001-04-08correct wi_write_record(); from freebsd; pointed out by Alfred Perlstein ↵Michael Shalayeff
<bright@wintelcom.net>
2001-04-06Match the Cisco Aironet 350 card; from NetBSD.Aaron Campbell
2001-04-06regenAaron Campbell
2001-04-06Add Cisco Aironet 350; from NetBSD.Aaron Campbell
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 17:21:29 +0000