| Age | Commit message (Expand) | Author |
|---|
| 2007-06-03 | Implement transmission of ACL and SCO packets | Uwe Stuehler |
| 2007-06-02 | split up large CMD53 reads and writes | Uwe Stuehler |
| 2007-06-02 | retry reading HCI packets a few times before giving up | Uwe Stuehler |
| 2007-05-31 | don't print debug messages | Uwe Stuehler |
| 2007-05-31 | Clean up and fix sbt_write_packet() | Uwe Stuehler |
| 2007-05-31 | An SDIO Bluetooth driver, only initial bits and therefore not enabled yet | Uwe Stuehler |
| 2007-05-31 | Add SDIO card interrupt handling code | Uwe Stuehler |
| 2007-05-26 | Bug fixes and initial card interrupt support in sdhc | Uwe Stuehler |
| 2007-05-26 | Wait until an I/O function becomes ready after enabling it, and make | Uwe Stuehler |
| 2007-05-26 | Use M_TEMP, not M_DEVBUF for temporary memory | Uwe Stuehler |
| 2007-05-11 | regen | Marcus Glocker |
| 2007-05-11 | Add vendor and product; AboCom Systems, Inc. SDW11G. | Marcus Glocker |
| 2007-04-11 | ((cast)ptr)++ is not a valid lvalue, despite being tolerated by gcc, so | Miod Vallat |
| 2007-03-24 | Dump command and response when debugging is enabled | Uwe Stuehler |
| 2007-03-18 | Define MMC_STOP_TRANSMISSION command (CMD12) | Uwe Stuehler |
| 2007-03-18 | DHC automatically sends a CMD12 after multiple-block transfers, but other | Uwe Stuehler |
| 2007-03-18 | Support the PXA27x SD/SDIO/MMC controller on Zaurus | Uwe Stuehler |
| 2007-01-31 | Workaround for the problem where the SD card reader stops responding after | Claudio Jeker |
| 2007-01-28 | Restore spl level before exiting on error. | Kenneth R Westerback |
| 2006-12-20 | sync | Theo de Raadt |
| 2006-12-20 | add atheros ids | Theo de Raadt |
| 2006-11-29 | move CSD/CID decoding to sdmmc_mem.c | Uwe Stuehler |
| 2006-11-29 | make interrupt handler stay quiet in case of shared interrupts | Uwe Stuehler |
| 2006-11-29 | oops, don't always enable debugging | Uwe Stuehler |
| 2006-11-29 | Show debug messages depending on current debug level, which may be | Uwe Stuehler |
| 2006-11-29 | add ioctl hack to support the sdio(8) userland tool | Uwe Stuehler |
| 2006-11-28 | give scsi controllers a real attach args to fill in when attaching scsibus. | David Gwynne |
| 2006-10-19 | s/Mhz/MHz/ in comments and printf() strings | Tom Cosgrove |
| 2006-10-17 | dont pass a copy of sdmmcs scsi_link struct on the stack to the midlayer. | David Gwynne |
| 2006-08-23 | Protect scsi_done() with splbio(), discussed with and okay dlg@, marco@ | Pedro Martelletto |
| 2006-07-30 | more. | Federico G. Schwindt |
| 2006-07-30 | add some more definitions. | Federico G. Schwindt |
| 2006-07-30 | o Change sdhc_soft_reset() to pass the bits we want to reset and wait | Federico G. Schwindt |
| 2006-07-19 | add some more debugging code. | Federico G. Schwindt |
| 2006-07-18 | sync | Theo de Raadt |
| 2006-07-18 | fix vendor typo | Theo de Raadt |
| 2006-07-18 | sync | Theo de Raadt |
| 2006-07-18 | mediatek/spectec | Theo de Raadt |
| 2006-07-18 | First and foremost, avoid an obious race between two or more processes | Uwe Stuehler |
| 2006-07-17 | silently return if sdmmc is disabled/not in the kernel. uwe@ ok. | Federico G. Schwindt |
| 2006-07-17 | correct the way hosts are alloc'ed. fixes crashes on controllers with | Federico G. Schwindt |
| 2006-07-17 | correct base freq mask per spec. sdhc found in the nx6125 now configures | Federico G. Schwindt |
| 2006-07-10 | print the frequency in mhz, really. | Federico G. Schwindt |
| 2006-06-29 | - Assign RCAs beginning at 1 since 0 is used to deselect all cards. | Uwe Stuehler |
| 2006-06-29 | Oops! Clear the "function 0" pointer when the card goes away. | Uwe Stuehler |
| 2006-06-29 | Thanks to ian@ who experimented a lot with his TI PCI7621 SDHC, we know | Uwe Stuehler |
| 2006-06-19 | Appease the printf gods here too | Miod Vallat |
| 2006-06-03 | prettier function declaration | Martin Reindl |
| 2006-06-03 | regen | Uwe Stuehler |
| 2006-06-03 | correct product id for the SyChip device | Uwe Stuehler |
