summaryrefslogtreecommitdiff
path: root/sys/dev/usb/files.usb
AgeCommit message (Expand)Author
2012-09-20only want uoak_subr.c, if we have any of the 3 main driversTheo de Raadt
2012-09-20add device driver for Toradex OAK usb sensors:Yojiro Uo
2012-09-19SMSC LAN95xx 10/100 USB Ethernet driver, ported from FreeBSD.Jonathan Gray
2012-09-17add sensor category and moved some devices to the category.Yojiro Uo
2011-09-16add device driver for Fujitsu Components FX-5204PS smart power strip.Yojiro Uo
2011-05-24On OpenBSD, we've always attached scsibus(4) to umass(4), even forMatthew Dempsky
2011-01-06only athn at uhub (not pci or cardbus) needs firmloadDamien Bergamini
2011-01-06"athn* at uhub? port ?"Damien Bergamini
2010-12-11rsu(4), a driver for Realtek RTL8188SU, RTL8191SU and RTL8192SUDamien Bergamini
2010-11-05urtwn(4), a driver for Realtek RTL8188CU/RTL8192CU 802.11n USB devices.Damien Bergamini
2010-09-23rename uyurex(4) to utwitch(4)Yojiro Uo
2010-07-31Factorization of the bluetooth and usb hid input driver logic, to reduce codeMiod Vallat
2010-07-03No more ss(4) or usscanner(4). Unused, unloved and unmaintained.Kenneth R Westerback
2010-03-20Allow kernels configurations with bluetooth but no USB to build.Matthieu Herrb
2010-03-01Add urndis(4), a driver for RNDIS Ethernet over USB.Michael Knudsen
2010-03-01add uyurex(4) which is device driver for YUREX twitch counter device.Yojiro Uo
2009-12-18add utrh(4): USBRH temperature / humidity sensor driverYojiro Uo
2009-12-09add uhts(4) a driver for USB HID touchscreens. ok miod@.Matthieu Herrb
2009-11-23Add uthum(4) device driver for TEMPerHUM USB temperature andYojiro Uo
2009-10-10Let udl select the maximum resolution supported by the udl device and theMats O Jansson
2009-05-09Initial console device driver for USB displays based on the DisplayLinkMarcus Glocker
2009-03-23otus(4), a driver for Atheros AR9001U USB IEEE 802.11 devices.Damien Bergamini
2009-01-25add udfu(4), a driver to put dfu capable devices in dfu-mode for laterFederico G. Schwindt
2009-01-03run(4), a driver for Ralink RT2700U/RT2800U/RT3000U USB 802.11agn devices.Damien Bergamini
2008-12-09uvideo uses firmware loading...Theo de Raadt
2008-11-27initial import of Weongyo Jeon's FreeBSD driver for the RealTek RTL8187LKevin Lo
2008-10-23Driver for MOSCHIP MCS7x30 usb ethernet chips by Johann Christian RodeTheo de Raadt
2008-04-09Initial import for uvideo(4) and video(4):Robert Nagy
2007-12-16the upgt file is.. optionalTheo de Raadt
2007-12-16Inital driver for the Conexant/Intersil PrismGT SoftMAC USB 2.0 devicesMarcus Glocker
2007-11-16driver for TI TUSB3410 usb serial, written by dxi@mail.ru andTheo de Raadt
2007-11-10umbg(4) is a driver to support the USB attached Meinberg USB5131 DCF77Marc Balmer
2007-09-08Driver for WinChipHead CH341/340 USB serial adapters.Jonathan Gray
2007-05-30fix this for ubt.cGordon Willem Klok
2007-03-17add uts(4); this was missing from the initial commitRobert Nagy
2006-11-28add needs-flag to allow pxaudc to compile without usbf (to get theUwe Stuehler
2006-11-27smallest usb driver ever: enable config on the Blackberry which preventsTheo de Raadt
2006-11-25Initial USB device controller (UDC) and USB CDC Ethernet function supportUwe Stuehler
2006-10-26Driver for MosChip MCS7703 based USB Serial devices.Jonathan Gray
2006-09-27Add Maxim/Dallas DS2490 USB 1-Wire adapter driver.Alexander Yurchenko
2006-09-16Initial import of uath(4), a driver for Atheros USB2.0 AR5005UG/AR5005UXDamien Bergamini
2006-08-15a start at the port of ucycom from netbsd (I have an delorme earthmate andJason Wright
2006-08-14Driver for Arkmicro Technologies ARK3116 USB UART based devices.Jonathan Gray
2006-06-28+ firmload for rum and zyd devices; ok jsg@.Xavier Santolaria
2006-06-21a good start at a driver for the Zydas ZD1211 802.11 devices byTheo de Raadt
2006-06-16- add rum(4), a driver for the next generation Ralink Technology USB 802.11a/b/gNiall O'Higgins
2006-04-29Driver for Silicon Laboratories CP2101/CP2102 based serial adapters.Jonathan Gray
2006-04-24oopsTheo de Raadt
2006-04-24syncTheo de Raadt
2006-04-20- remove the 'needs-flag' from the udcf entry in files.usb and the #ifdef NUDCFMarc Balmer