summaryrefslogtreecommitdiff
path: root/sys/dev/usb/if_ral.c
AgeCommit message (Expand)Author
2005-10-02allows dhcpd to work when ral/ural is acting as a standalone AP (withoutDamien Bergamini
2005-08-27Extend basic rate set in 802.11g so that ACKs can be sent at 5.5 or 11Mbps.Damien Bergamini
2005-08-27backout unapproved diffTheo de Raadt
2005-08-25Extend basic rate set in 802.11g so that ACKs can be sent at 5.5 or 11Mbps.Damien Bergamini
2005-08-23Ralink windows driver incorrectly lists a SMC product id that isJonathan Gray
2005-08-01Don't keep the devinfo string on the stack, instead use malloc/free.Brad Smith
2005-07-18Match Sphairon UB801R.Jonathan Gray
2005-07-07Match an additional 10 ural ids, most of which are already listedJonathan Gray
2005-07-07Match Gigabyte GN-WBKG, from Jaime Fournier <ober at linbsd.org>.Jonathan Gray
2005-06-20remove freebsd'isms in debug messages. pointed out by timsl (tim atDamien Bergamini
2005-06-16add support for the Belkin F5D7050 54g USB Network AdapterDavid Gwynne
2005-05-18don't initialize bbp registers with values in eeprom. some adapters seemDamien Bergamini
2005-05-13override default bbp register values with values stored in eeprom (exceptDamien Bergamini
2005-05-13before ieee80211.c rev 1.6, it was guaranted that ic_curmode was differentDamien Bergamini
2005-05-13simplify test conditions. ((v & f1) || (v & f2)) <=> (v & (f1 | f2)) inDamien Bergamini
2005-05-13make sure all endpoint descriptors have been found during the attachment.Damien Bergamini
2005-05-13give disassociation a chance when turning the interface down while associated.Damien Bergamini
2005-04-17don't disassociate on SIOCSIFADDR if the interface is already up and running.Damien Bergamini
2005-04-16don't leak a mbuf when tx fails.Damien Bergamini
2005-04-16indentDamien Bergamini
2005-04-15in ural_txeof(), call usbd_clear_endpoint_stall() on the tx pipe instead ofDamien Bergamini
2005-04-13New ural devices. Pointed out by Rodolfo Gouveia.Damien Bergamini
2005-04-02sync with ral. fixes hostap mode.Damien Bergamini
2005-04-01add code for setting WEP keys. this will be useful when i'll implementDamien Bergamini
2005-04-01make constants names match the spec.Damien Bergamini
2005-04-01force hardware timestamp insertion in outgoing beacons. make sure the sizeDamien Bergamini
2005-03-23use URAL_DEBUG not RAL_DEBUG. use logprintf for consistency. default toDamien Bergamini
2005-03-23add new vendor/product ids.Damien Bergamini
2005-03-23do packet accounting (opackets/oerrors/ierrors).Damien Bergamini
2005-03-23print the mac address in dmesg like every other nic we haveDavid Gwynne
2005-03-23USB_DEBUG implies URAL_DEBUG.David Gwynne
2005-03-19add spl calls where appropriate.Damien Bergamini
2005-03-19ieee80211_get_rate() is broken.Damien Bergamini
2005-03-19scan channels 12, 13 and 14 too.Damien Bergamini
2005-03-18use ieee80211_get_rate() instead of building or own routine.Damien Bergamini
2005-03-18add IBSS and HostAP support. thanks to SnoopyPro.Damien Bergamini
2005-03-18use xferlen for mgt frames too. this prevents management frames with aDamien Bergamini
2005-03-18only update the flags part of PHY_CSR5 and PHY_CSR6. this makes OFDMDamien Bergamini
2005-03-18close pipes and free tx/rx lists in detach(). this avoids some of theDamien Bergamini
2005-03-17give ipv6 a chance. pointed out by Paul de Weerd.Damien Bergamini
2005-03-17enable tx retries for unicast frames.Damien Bergamini
2005-03-17fix for big endian archsDavid Gwynne
2005-03-17- fix ralink urlDamien Bergamini
2005-03-16move ral vendor/product Ids into usbdevsDamien Bergamini
2005-03-16Driver for Ralink Technology RT2500USB wireless adapters.Damien Bergamini
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 07:04:36 +0000