Age | Commit message (Expand) | Author |
2006-10-22 | make sure ni->ni_txrate is always initialized to a meaningful value by | Damien Bergamini |
2006-10-19 | Support later versions of the ASUS WL-167g which have switched | Jonathan Gray |
2006-09-18 | don't use IF_PREPEND() on altq's. | Damien Bergamini |
2006-08-24 | s/IEEE80211_MTU_MAX/IEEE80211_MAX_LEN/ in my previous commit. | Damien Bergamini |
2006-08-23 | - fall back to 1Mbps if tx rate is returned as zero. avoids divide by zero. ... | Niall O'Higgins |
2006-08-23 | the maximum MTU allowed for IEEE802.11 is 2290 which is greater than | Damien Bergamini |
2006-08-23 | in rum_rxeof(), don't check xfer length against IEEE80211_MIN_LEN since | Damien Bergamini |
2006-08-18 | set of unrelated cosmetic tweaks. | Damien Bergamini |
2006-08-18 | fix a printf format string | Damien Bergamini |
2006-08-18 | - fix support for RT5225 (802.11a MIMO) | Damien Bergamini |
2006-08-17 | Separate rum(4) firmware from ral(4) ones. | Damien Bergamini |
2006-08-16 | Belkin RT2601USB. | Jonathan Gray |
2006-08-14 | Add a bunch more devices. | Jonathan Gray |
2006-08-14 | Disable default debug setting now rum works. | Jonathan Gray |
2006-08-10 | tell if chipset supports MIMO in dmesg output. | Damien Bergamini |
2006-08-09 | mega-commit of unrelated changes to bring rum(4) into a working state. | Damien Bergamini |
2006-07-19 | RX descriptor is located at the beginning of the RX buffer, unlike | Damien Bergamini |
2006-07-19 | remove rum_set{tx,rx}antenna() that were specific to RT2500USB. | Damien Bergamini |
2006-07-19 | write firmware 4 bytes at a time. | Damien Bergamini |
2006-07-19 | revert part of r1.6 commit. | Damien Bergamini |
2006-07-19 | fix rum_set_macaddr() and cleanup rum_set_bssid(). | Damien Bergamini |
2006-07-19 | fix rum_write(). | Damien Bergamini |
2006-07-19 | kick ASIC only after clearing STA registers. | Damien Bergamini |
2006-07-19 | there aren't 10 STA registers on RT2501USB. | Damien Bergamini |
2006-07-19 | wait for chip to settle *before* retrieving ASIC revision number since | Damien Bergamini |
2006-07-19 | define rum_read() as rum_read_multi(). | Damien Bergamini |
2006-07-19 | fix rum_read_multi() to actually read at the requested index. | Damien Bergamini |
2006-07-19 | remove redundant #define | Damien Bergamini |
2006-07-18 | nuke sc->rssadapt_ch. it was used but not initialized. | Damien Bergamini |
2006-07-18 | fix a broken conditional expression in rum_bbp_init(). | Damien Bergamini |
2006-07-18 | mountroothooks don't return a value, so don't use USB_ATTACH_ERROR_RETURN | Damien Bergamini |
2006-07-18 | fix polling for busy bit in rum_bbp_{read,write} | Damien Bergamini |
2006-07-18 | SEC_CSR registers have a different meaning in RT2501USB. | Damien Bergamini |
2006-07-18 | fix rum_set_chan(): | Damien Bergamini |
2006-07-18 | RF registers are 20 bits on RT2501USB, not 21. | Damien Bergamini |
2006-07-18 | RT2501USB uses 32bit registers unlike RT2500USB. | Damien Bergamini |
2006-07-18 | RT2501USB needs to reserve room for a 32bit value aligned on a 32bit | Damien Bergamini |
2006-07-18 | - move default register values into if_rumreg.h (for consistency w/ ural) | Damien Bergamini |
2006-07-02 | Fix channel frequency/flags in radiotap structures. | Jonathan Gray |
2006-06-21 | Add a few RT73 devices that are known to exist in the wild. | Jonathan Gray |
2006-06-17 | prefix debug messages with the device name | Jolan Luff |
2006-06-16 | - add rum(4), a driver for the next generation Ralink Technology USB 802.11a/b/g | Niall O'Higgins |