summaryrefslogtreecommitdiff
path: root/sys/dev/usb/if_rum.c
AgeCommit message (Expand)Author
2006-10-19Support later versions of the ASUS WL-167g which have switchedJonathan Gray
2006-09-18don't use IF_PREPEND() on altq's.Damien Bergamini
2006-08-24s/IEEE80211_MTU_MAX/IEEE80211_MAX_LEN/ in my previous commit.Damien Bergamini
2006-08-23- fall back to 1Mbps if tx rate is returned as zero. avoids divide by zero. ...Niall O'Higgins
2006-08-23the maximum MTU allowed for IEEE802.11 is 2290 which is greater thanDamien Bergamini
2006-08-23in rum_rxeof(), don't check xfer length against IEEE80211_MIN_LEN sinceDamien Bergamini
2006-08-18set of unrelated cosmetic tweaks.Damien Bergamini
2006-08-18fix a printf format stringDamien Bergamini
2006-08-18- fix support for RT5225 (802.11a MIMO)Damien Bergamini
2006-08-17Separate rum(4) firmware from ral(4) ones.Damien Bergamini
2006-08-16Belkin RT2601USB.Jonathan Gray
2006-08-14Add a bunch more devices.Jonathan Gray
2006-08-14Disable default debug setting now rum works.Jonathan Gray
2006-08-10tell if chipset supports MIMO in dmesg output.Damien Bergamini
2006-08-09mega-commit of unrelated changes to bring rum(4) into a working state.Damien Bergamini
2006-07-19RX descriptor is located at the beginning of the RX buffer, unlikeDamien Bergamini
2006-07-19remove rum_set{tx,rx}antenna() that were specific to RT2500USB.Damien Bergamini
2006-07-19write firmware 4 bytes at a time.Damien Bergamini
2006-07-19revert part of r1.6 commit.Damien Bergamini
2006-07-19fix rum_set_macaddr() and cleanup rum_set_bssid().Damien Bergamini
2006-07-19fix rum_write().Damien Bergamini
2006-07-19kick ASIC only after clearing STA registers.Damien Bergamini
2006-07-19there aren't 10 STA registers on RT2501USB.Damien Bergamini
2006-07-19wait for chip to settle *before* retrieving ASIC revision number sinceDamien Bergamini
2006-07-19define rum_read() as rum_read_multi().Damien Bergamini
2006-07-19fix rum_read_multi() to actually read at the requested index.Damien Bergamini
2006-07-19remove redundant #defineDamien Bergamini
2006-07-18nuke sc->rssadapt_ch. it was used but not initialized.Damien Bergamini
2006-07-18fix a broken conditional expression in rum_bbp_init().Damien Bergamini
2006-07-18mountroothooks don't return a value, so don't use USB_ATTACH_ERROR_RETURNDamien Bergamini
2006-07-18fix polling for busy bit in rum_bbp_{read,write}Damien Bergamini
2006-07-18SEC_CSR registers have a different meaning in RT2501USB.Damien Bergamini
2006-07-18fix rum_set_chan():Damien Bergamini
2006-07-18RF registers are 20 bits on RT2501USB, not 21.Damien Bergamini
2006-07-18RT2501USB uses 32bit registers unlike RT2500USB.Damien Bergamini
2006-07-18RT2501USB needs to reserve room for a 32bit value aligned on a 32bitDamien Bergamini
2006-07-18- move default register values into if_rumreg.h (for consistency w/ ural)Damien Bergamini
2006-07-02Fix channel frequency/flags in radiotap structures.Jonathan Gray
2006-06-21Add a few RT73 devices that are known to exist in the wild.Jonathan Gray
2006-06-17prefix debug messages with the device nameJolan Luff
2006-06-16- add rum(4), a driver for the next generation Ralink Technology USB 802.11a/b/gNiall O'Higgins