| Age | Commit message (Collapse) | Author |
|---|
|
remove IBSS and HostAP support from net80211 and 802.11 drivers.
it can be used to shrink RAMDISK kernels for instance (like what
was done for wi(4)).
it also has the benefit of highlighting what is specific to IBSS
and HostAP modes in the code.
the cost is that we now have two code paths to maintain.
|
|
|
|
when acting as an access point instead of having each driver doing the
job.
tested by krw@ (ral AP) and me with several drivers.
|
|
From Andrew Thompson at FreeBSD.
|
|
pass a pointer to an ieee80211_rxinfo structure containing those two
fields plus an extra flags field that indicates whether the frame was
decrypted by hardware or not.
required for a future fix.
|
|
|
|
|
|
handshake protocols (both supplicant and authenticator state
machines) as defined in the IEEE 802.11i standard.
Software implementation of the TKIP (Temporal Key Integrity
Protocol) and CCMP (CTR with CBC-MAC Protocol) protocols.
This diff doesn't implement any of the 802.1X authentication
protocols and thus only PSK authentication (using pre-shared
keys) is currently supported.
In concrete terms, this adds support for WPA-PSK and WPA2-PSK
protocols, both in station and hostap modes.
The following drivers are marked as WPA-capable and should
work: bwi(4), malo(4), ral(4), iwn(4), wpi(4), ural(4),
rum(4), upgt(4), and zyd(4)
The following options have been added to ifconfig(8):
wpa, wpapsk, wpaprotos, wpaakms, wpaciphers, wpagroupcipher
wpa-psk(8) can be used to generate keys from passphrases.
tested by many@
ok deraadt@
|
|
From FreeBSD.
|
|
discussed with deraadt@
|
|
Corega CG-WLUSB2GL WLAN from KIYOHARA Takashi in NetBSD.
|
|
rum vs ural determination done by jsg
|
|
so that it shows up before the :. as a result, all the usb devices do not
need to have name printing code anymore. all this now works and prints
nicely because usbd_probe_and_attach() is serialized. ok kettenis
|
|
remove <malloc.h> from files where malloc is not used.
|
|
USB_DECLARE_DRIVER macros.
No binary change.
ok dlg.
|
|
No binary change.
ok mk.
|
|
(This might look easy, but it was a big diff. Thanks to dlg and especially jsg
for looking over it; we found at least four mistakes in the initial diff.)
ok jsg.
|
|
and the address of it's argument: USBDEV(sc->sc_dev) yields &sc->sc_dev.
No binary changes.
ok jsg.
|
|
thus produced no code at all.
No binary change.
ok jsg.
|
|
no binary change.
|
|
and it was not consistently used. It was confusing as it suggested these
functions were static, which they were not.
discussed with dlg and jsg, ok jsg.
|
|
ok deraadt@ krw@ mbalmer@
|
|
|
|
|
|
this lets these work on macppc, for instance
diagnosed by kettenis, but damien is not around, so ok jsg and others
|
|
|
|
tnx to: yuo at nui.org
|
|
Two from Yojiro UO in NetBSD PR 35552
|
|
bump copyright while i'm here.
|
|
chain and so a later MFREE() is needed to free the chain again.
In this special case we get away by initializing a minimal mbuf header
instead of the M_DUP_PKTHDR() because bpf_mtap() does not access the pkthdr.
This fixes kettenis@ mtag memory leak on armish.
Tested by kettenis@ OK mglocker@ Sounds good jsg@
|
|
use official url instead: http://www.ralinktech.com.tw/
|
|
don't call xxx_set_chan() if the interface is not up&running.
patch from Steffen Schuetz (st dot sch at gmx dot net) with
minor modifications by me.
closes kernel/5313
|
|
a process context. this avoids potential races in {ural,rum}_stop().
|
|
the standard rates, use some defined by net80211 itself. kernel shrinks a bit
ok jsg mglocker
|
|
i removed it in my last commit because i thought it was gone.
looks like it's not the case.
pointed out by niallo@
|
|
- use the newly introduced ieee80211_get_rts() and
ieee80211_get_cts_to_self() functions.
- use CTS-to-self instead of RTS/CTS to protect OFDM frames in
a mixed 11b/g BSS.
- make sure multicast frames are sent using CCK modulation.
remove support for 5GHz radios in ral(4) RT2560 and ural(4).
i'm not aware of any such adapters on the market and 11a code
is known to be broken.
some cleanup while i'm here.
|
|
redefining ic->ic_newassoc.
this should prevent "bogus xmit rate" panics when operating in HostAP
mode.
|
|
from ural to rum.
From Jason Crawford <jasonrcrawford@gmail.com>
|
|
use IFQ_POLL()/IFQ_DEQUEUE() logic instead as described in altq(4).
|
|
|
|
should never happen, but sometimes it does on my amd64.
ok damien@
|
|
MCLBYTES (usually 2048).
allocate tx xfer buffers of IEEE80211_MTU_MAX instead of MCLBYTES.
rx buffers are still limited to MCLBYTES though.
|
|
the CRC is not included in the xfer.
check against sizeof(struct ieee80211_frame_min) instead.
|
|
|
|
|
|
- set default Tx power for 802.11a channels
- in rum_newstate(), save the "arg" parameter so we can pass it to the
ieee80211_new_state() function in the usb task
- merge rum_tx_data() and rum_tx_mgt()
- s/le32toh/letoh32/g (le32toh is defined in usb_port.h)
- cosmetic while i'm here
|
|
ral(4) firmwares are built on PCI-capable architectures only while rum(4)
firmware is built on USB-capable architectures only.
Rename ral-rt2573 into rum-rt2573 and build rum-rt2573 on the zaurus too
(pointed out by Patrick Heim).
ok deraadt@
|
|
|
|
|
|
|
