summaryrefslogtreecommitdiff
path: root/sys/dev/usb/if_run.c
AgeCommit message (Expand)Author
2010-04-20remove proc.h include from uvm_map.h. This has far reaching effects, asTed Unangst
2010-04-15new Hawking run(4) idsDamien Bergamini
2010-04-14clean Sitecom run(4) ids.Damien Bergamini
2010-04-06always enable both 2GHz and 5GHz LNAs regardless of the bandDamien Bergamini
2010-04-06add BELKIN F5D8055V2Alexander Hall
2010-04-04Fix 5GHz channels TX power settings for RT2860/RT2870 (does notDamien Bergamini
2010-03-27Fix TX power per rate settings.Damien Bergamini
2010-02-25new run(4) idsDamien Bergamini
2010-02-24Sweex LW153Damien Bergamini
2010-02-24more run(4) idsDamien Bergamini
2010-02-24ALLWIN TechDamien Bergamini
2010-02-19fix run_set_region_4 to set the whole region specified,Damien Bergamini
2010-02-10check that rf reg is != 0xff, not rf val.Damien Bergamini
2010-02-08remove redundant bits.Damien Bergamini
2010-02-08final bits for RT3572 and some fixes for RT3070 and RT3071.Damien Bergamini
2010-02-08add the 10us sifs directly to the pre-computed ack durations.Damien Bergamini
2010-02-08simplifyDamien Bergamini
2010-02-08s/RT2860_MCU_CMD_BOOT/RT2860_MCU_CMD_RFRESET/Damien Bergamini
2010-02-08fix BBP R82 for RT3572Damien Bergamini
2010-02-07writing to RT2860_TX_PIN_CFG requires some extra steps on RT3572Damien Bergamini
2010-02-07fix my 1.44->1.45 commitDamien Bergamini
2010-02-07we're in 2010.Damien Bergamini
2010-02-07add two more ids for RT3572 and one more id for RT2770.Damien Bergamini
2010-02-07set tx mixer gain for RT3071Damien Bergamini
2010-02-07change RF init sequence for RT3572Damien Bergamini
2010-02-07cleanup run_rt3070_set_chanDamien Bergamini
2010-02-07add a function to set the channel on RT3572.Damien Bergamini
2010-02-07when calibrating filter, use better target values for >=RT3071Damien Bergamini
2010-02-07read vendor RF settings for >=RT3572 and tx mixer gains for >=RT3070Damien Bergamini
2010-02-07add a new function to set the AGC since the code is a bit differentDamien Bergamini
2010-02-07use new mcu command to select the antenna on RT2020Damien Bergamini
2010-02-07split 32-bit mac_rev into 16-bit mac_ver and mac_rev to avoidDamien Bergamini
2010-02-07add rf init values for rt3572Damien Bergamini
2010-02-07add channels 167, 169, 171, 173 for dual-band devicesDamien Bergamini
2009-12-10"please apply the same diff as for rt2860 to if_run.c" damien@Owain Ainsworth
2009-11-17another shitload of run(4) usb idsDamien Bergamini
2009-11-03setting of WEP keys is defered until interface is brought up,Damien Bergamini
2009-09-16fix ENETRESET handling in run_ioctl() and run_media_change().Damien Bergamini
2009-08-10missing argument to DPRINTF.Damien Bergamini
2009-07-29Linksys WUSB54GC v3Damien Bergamini
2009-06-17fix endianness issue on BE.Damien Bergamini
2009-06-04the Sitecom WL-608 is a run(4) (although it is not 80.11n capable).Damien Bergamini
2009-05-24attach to more devices.Damien Bergamini
2009-05-19Hercules HWNU-300 is a run(4).Damien Bergamini
2009-05-18fix reading from e-fuse rom (>= RT3070 only).Damien Bergamini
2009-05-15properly identify the RT3052 radio (dual-band 2T2R) in dmesg.Damien Bergamini
2009-05-15update run(4) microcode.Damien Bergamini
2009-05-15attach to more devices; we now have 113 usb ids.Damien Bergamini
2009-05-12sort usb ids. i found a simpler way to keep them in sync with theDamien Bergamini
2009-05-11run(4) celebrates its 98th USB ID!Damien Bergamini
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 05:13:15 +0000