| Age | Commit message (Collapse) | Author |
|---|
|
IEEE80211_ACK_LEN instead of IEEE80211_MIN_LEN for ZYD_MIN_RXBUFSZ
and ZYD_MIN_FRAGSZ.
silence some warnings while i'm there.
change ZYD_FILTER_BSS to use the same value as the vendor's driver
that contains some magic (undocumented) bits.
|
|
hints from zd1211rw.
|
|
- fix an incorrect setting of `retry times' in case of zd1211b
- increase max rx size so there's room for multi-frame transactions
(slightly modified version)
from the Linux zd1211rw driver:
- patch registers CR47 and CR157 on devices that require it
- fix power calibration setting on ZD1211B
|
|
Tested by thib and myself.
ok mbalmer jsg
|
|
|
|
we were iterating from 0 to N(zyd_def_phy), but N(zyd_def_phy) is not
equal to N(zyd_def_phyB). we were probably writting garbage to the PHY.
|
|
Seems to work fine with Linksys and 3Com adapters.
|
|
sequences for radios not yet done.
"commit what you have" damien@
|
|
untested because of lack of hardware. if you have a ZD1211 adapter
with one of these radios, please drop us a mail.
code written by Florian Stoehr <ich AT florian-stoehr DOT de>
|
|
code written by Florian Stoehr. not tested due to lack of hardware.
if you happen to have an adapter with this radio please report success/
failure.
|
|
|
|
|
|
should work with ZD1211 (not ZD1211B!) adapters with either a
RFMD or AL2230 radio chip.
does not support IBSS or HostAP modes yet.
committed over a Billion 3011G (ZD1211/AL2230).
"commit it!" deraadt@
|
|
This lets me see beacons on my device.
|
|
|
|
|
|
|
|
and move declarations of the big ones to get them off the
limited amount of stack we get to play with in kernel land.
Discussed with Florian, ok reyk@ xsa@
|
|
From Graham Gower.
|
|
|
|
|
|
|
|
ich@florian-stoehr.de. Apparently it can receive now. Contact him
if you want to help, or need the firmware image.
|
