| Age | Commit message (Collapse) | Author |
|---|
|
ok krw@
|
|
|
|
suggested by mickey
|
|
ok krw@
|
|
with Zaurus.
|
|
Mostly stylistic change, making comments and printf()s similar between BBB
and CBI.
ok krw@
|
|
do less work if we hit an error
ok krw@
|
|
Fix a printf() error.
ok krw@
|
|
When starting a bulk-only transfer, punt early if the device is going away.
ok krw@
|
|
Do the quirk initialization earlier.
ok krw@
|
|
On a Bulk-In data stall, make sure we copy back the data received, per the
spec. This is the real problem behind FORCE_SHORT_INQUIRY.
ok krw@
|
|
log message for umass 1.98, umass_scsipi.c 1.11, umassvar.h 1.21:
Fix several problems with CCI handling, and enable it: * We were never calling
the callback function when we got a UFI CCI(!). * We were passing a bogus
residual count on non-UFI CCIs. * After a REQUEST SENSE, the UFI CCI may
include the ASC/ASCQ from the sense information -- don't consider this a
failure.
In addition, remove a horrible hack that was causing us to drop sense
information on the floor and return empty INQUIRY responses, often in the
case where there is a UNIT ATTENTION pending during the INQUIRY. (Some drives
send the data and then fail, some don't.)
log message for umass.c 1.113:
Do not return STATUS_WIRE_FAILED in response to a CBI stall. This is perfectly
normal, and is used to report errors. Instead, use STATUS_CMD_FAILED, which
causes us to do a REQUEST SENSE. Should address PR 22960.
log message for umass.c 1.115:
Do not do a CBI reset before returning STATUS_CMD_FAILED. This causes any
sense information to be thrown away, and is therefore nonsensical.
ok krw@
|
|
log message:
Implement outgoing interrupt pipes. It is part of the USB 1.1 spec.
The Lego Infrared Tower use it.
ok deraadt@
|
|
network interfaces, transporting Ethernet, supporting Sharp Zaurus and
Prolific PL-2501 (external cable). Written by Craig Boston based on code
from Bill Paul. ok deraadt@
|
|
|
|
|
|
|
|
|
|
|
|
log message:
Remove UMASS_QUIRK_NO_START_STOP and UMASS_QUIRK_NO_MAX_LUN.
We don't have UMASS_QUIRK_NO_START_STOP so I didn't have to remove it. I
consider umass_quirks.c to be too different so I hand removed references to
the removed defines. There are some useless entries in there now which will
be cleaned up after umass is merged with netbsd.
ok deraadt@
|
|
|
|
ok'd by him and markus@
|
|
|
|
|
|
Well, this is bloody obscure...
My Imation USB FlashGO! adapter responds to a Get Max Lun request with a
stall. With uhci, this does the expected thing. With ohci, it was returning
a "data underrun" error because we weren't setting "buffer rounding" (i.e.
USBD_SHORT_XFER_OK), and the underrun was taking priority. This happened with
both the ohci in a Mac cube and the builtin ohci on the S3C2410.
So, set USBD_SHORT_XFER_OK on the Get Max Lun. Now I get a stall reported and
umass attaches correctly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The MCT advertises both the interrupt and bulkin endpoints as
interrupts. Go from assuming that the first enumerated interrupt
is the bulkin (since this may not be the case) to assuming that
the true interrupt endpoint will have a 0x2 wMaxPacketSize.
|
|
|
|
|
|
|
|
|
|
Ignore a port error that happens to come in at the same time as a connect
status change. Some root hubs seem to report both.
|
|
uhub.c revision 1.65, ohci.c revision 1.146, uhci.c revision 1.177
Use the correct wValue to get hub desriptors.
Also, make wValue checks of root hub codes less strict.
|
|
|
|
|
|
this is netbsds fix for the endian problems they had with the data toggle
change. do the swap when the var is assigned to the qtd, rather than swap
everything that is assigned to the var and just assign the var. instead of 4
or so htole32s we now do 1.
from netbsd, ehci.c 1.67 (i made a mistake, the last patch i gave you was
from 1.68) log message:
Fix a byte order error.
|
|
|
