summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2016-01-07Fix A-MPDU parameters in link quality firmware commands in iwn(4) and iwm(4).Stefan Sperling
2016-01-07Rename some wrongly defined *_CONFIG_NO into *_CONFIG_INDEX.Martin Pieuchot
2016-01-07look at pkts inside the loop over the pkts in em_free_receive_structures.David Gwynne
2016-01-07Use a resune hook to re-evaluate the "_LID" status upon resume.Martin Pieuchot
2016-01-07rename em_buffers to em_packets.David Gwynne
2016-01-07Xen virtual networking interface (Netfront) driver.Mike Belopuhov
2016-01-07rename the rx and tx ring softc vars.David Gwynne
2016-01-07prefix the rx and tx ring softc members with sc_David Gwynne
2016-01-07host the rx ring dmamap syncs out of em_get_buf into em_rxfill.David Gwynne
2016-01-07unify the bus_dmamap_sync calls around the tx and rx rings.David Gwynne
2016-01-07dma_paddr in struct em_dma_alloc is unused, so gc it.David Gwynne
2016-01-07simplify the calculation of the dmamem size for the tx and rx rings.David Gwynne
2016-01-07unify the dma tag into sc_dmat in em_softc.David Gwynne
2016-01-07sprinkle DEVNAMEDavid Gwynne
2016-01-07rename the struct arpcom interface_data in em_softc to sc_ac.David Gwynne
2016-01-07rename em_softc sc_dv to sc_dev. like ALL OUR OTHER DRIVERS.David Gwynne
2016-01-07tweak em to make it mpsafe, both for interrupts and if_start.David Gwynne
2016-01-07Copy received data only if it exists. Avoid panics in odd situations.Masao Uebayashi
2016-01-06Initialize the A-MPDU parameters field in HT capability elements.Stefan Sperling
2016-01-06Add DRM_RENDER_ALLOW flag to the appropriate ioctls such that pledge "drm"Mark Kettenis
2016-01-06Ensure that iwn(4) always uses a CCK rate as last fallback in the firmware'sStefan Sperling
2016-01-06iwm(4) adjusts the firmware's tx rate retry table dynamically so we mustStefan Sperling
2016-01-06Follow the spec and check the SCI_EN bit to see if ACPI has alreadyMark Kettenis
2016-01-06Add pledge "drm", which allows a subset of the drm(4) ioctls. These areMark Kettenis
2016-01-06revert 1.87, more work is needed hereMike Belopuhov
2016-01-05Remove the IEEE80211_NO_HT macro. Reduces ifdef spaghetti, enables 11n modeStefan Sperling
2016-01-05Move over to the v1 of Grant Table entriesMike Belopuhov
2016-01-05Memorize the DMA segment's data offset within the pageMike Belopuhov
2016-01-04Record the modified mbuf chain after transmit checksum setup codeMike Belopuhov
2016-01-04Skip "suspend" device node during probingMike Belopuhov
2016-01-04Include the node name into the error messageMike Belopuhov
2016-01-04Preallocate Grant Table frames to simplify the code for nowMike Belopuhov
2016-01-04Add initial support for 11n mode to the iwn(4) driver.Stefan Sperling
2016-01-04mark the driver MPSAFE. most of this is cleaning up the oactive handling.David Gwynne
2016-01-03Fix typo in comment.Mark Kettenis
2016-01-03Add support for 100 series to pchtemp(4).Daniel Dickman
2016-01-01Reimplement vga_put() such that it compiles on i386 as well.Mark Kettenis
2015-12-31regenMark Kettenis
2015-12-31Add some XEON-D devices.Mark Kettenis
2015-12-31Make ixgbe_start() mpsafe. This means the driver will no longer grab theMark Kettenis
2015-12-3182544 on pcix busses needs a workaround that effectively doublesDavid Gwynne
2015-12-31Add pchtemp(4) a driver for the thermal sensor on recent Intel PCHs.Mark Kettenis
2015-12-31Provide a minimal implementation of the Linux vga_get/vga_put API and use itMark Kettenis
2015-12-31Unconditionally set the "switchcookie". Fixes synchronous VT switching.Mark Kettenis
2015-12-29regenMark Kettenis
2015-12-29Intel C610 Thermal SensorMark Kettenis
2015-12-29Tweak previous by de-indenting label and replacing remaining continuesmmcc
2015-12-29shuffle tx code slightly and mark bge_start as mpsafe.David Gwynne
2015-12-29Set UltraDMA transfer mode. Some (early?) SATA drives, such as the MaxtorMark Kettenis
2015-12-29Remove NULL-checks before free().mmcc
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-01 21:04:36 +0000