summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2006-11-25Don't handle acpiev events inside the gpe handler since this causes deadlocks.Marco Peereboom
2006-11-25Fixed acpiec code for deadlockJordan Hargrave
2006-11-25initial stab at an SBus front end for gem(4). currently untested.Brad Smith
2006-11-25Initial NAND flash support for Zaurus, not enabled yet; prodded by many.Uwe Stuehler
2006-11-25Cleanup obsolete rate bits and pass right value to the TX rate descriptor.Marcus Glocker
2006-11-25If no TX rate has been calculated yet, set rate value to autoselectMarcus Glocker
2006-11-25fix use of gem_bitwait().Brad Smith
2006-11-25Split the GEM registers into two halfs and provide a bus_space_handle_tBrad Smith
2006-11-25additional registers and some comment fixes.Brad Smith
2006-11-25Fix a copy and pasto.Brad Smith
2006-11-24Small KNF fix.Marcus Glocker
2006-11-24Enable setting of fixed rates.Marcus Glocker
2006-11-24Enable automatic rate adapation (done by firmware and hardware).Marcus Glocker
2006-11-24From Jon Simola <jsimola@gmail.com>:Marcus Glocker
2006-11-24regenBrad Smith
2006-11-24add the Broadcom BCM5709 PCI id.Brad Smith
2006-11-24replace a magic number (reserved TX descs?) with macroBrad Smith
2006-11-24regenBrad Smith
2006-11-24add the DLink DWL-G120 product id.Brad Smith
2006-11-23Remove 802.11a stuff. There is one RF chip (88W8030) which supports 5GHz,Marcus Glocker
2006-11-23Do not attach second port on dual port cards for now.Mark Kettenis
2006-11-23Set some more power management bits; makes Yukon-2 XL work somewhat.Mark Kettenis
2006-11-23The duration field is calculated by the firmware. Remove malo_txtime()Marcus Glocker
2006-11-23OpenBSD-ify the HW VLAN tag insertion code.Brad Smith
2006-11-22add the BCM4312 PCI id.Brad Smith
2006-11-22style(9): remove variables names from prototypes.Damien Bergamini
2006-11-22Remove rssadapt(9) bits; Firmware supports rate adaption. Also,Marcus Glocker
2006-11-22don't write to BBP before it is ready and fully initializedDamien Bergamini
2006-11-22Some more minor cleanup in the PCI hookup.Marcus Glocker
2006-11-22From Jon Simola <jon@mecha.ca>:Marcus Glocker
2006-11-21Fail wi_get_txpower() on USB wi(4), so that we don't CSR_READ on them.Miod Vallat
2006-11-21Free allocated mbufs at TX done. While there also reset some TX descriptorMarcus Glocker
2006-11-21fix dmesg printing for the artisea chipset.Brad Smith
2006-11-21From Jon Simola <simola@mecha.com>:Marcus Glocker
2006-11-21Remove watchdog handler workaround introduced in rev 1.149 which is noBrad Smith
2006-11-21style changes. no op.Brad Smith
2006-11-20Re-enable HW VLAN tagging.Brad Smith
2006-11-20set the IFCAP_VLAN_HWTAGGING capabilities flag.Brad Smith
2006-11-20Added 2nd pass for interrupt override scanningJordan Hargrave
2006-11-20Fix register number definitions.Mark Kettenis
2006-11-20only try to do HW checksum offload for TCP and UDP.Brad Smith
2006-11-20Due to an incorrect macro, it appears that the driver has always beenBrad Smith
2006-11-20Add support for LM63.Mark Kettenis
2006-11-19Re-enable the Intel i31244 support now that real hardware actually exists.Brad Smith
2006-11-19some additional registers for the Artisea chipset operating in DPA mode.Brad Smith
2006-11-19In bnx_start, check the used_tx_bd count rather than the descriptorsBrad Smith
2006-11-19regenBrad Smith
2006-11-19add the Broadcom BCM4312 PCI id.Brad Smith
2006-11-19restore the workaround for rate==0 bug.Damien Bergamini
2006-11-19Probe for National Semiconductor LM63.Mark Kettenis
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-19 22:09:25 +0000