summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2006-02-04Redo debugging mechanism to something less loud and more useful.Marco Peereboom
2006-02-04s/amd1032cloneprobe/adm1032cloneprobe/gMark Kettenis
2006-02-04fix clearing of h/w csum flags in all but the first fragmentDamien Bergamini
2006-02-04fix a copy/paste in a comment.Damien Bergamini
2006-02-04silently discard f/w notifications that are unknown (fixes spuriousDamien Bergamini
2006-02-04handle link state change interrupts but do nothing for nowDamien Bergamini
2006-02-04- add support for multicast filters.Damien Bergamini
2006-02-04When ACPI_ENABLED wasn't set but the devices were it had an unknown variable.Marco Peereboom
2006-02-03Rewrote aml parser yet again...Jordan Hargrave
2006-02-03Restore patch from rev 1.9 of macppc/dev/ams.c that got lost in codeMatthieu Herrb
2006-02-03Back out i915 changes; they broke some i810-based machines.Todd C. Miller
2006-02-03add some more Intel PIIX IDE controllers..Brad Smith
2006-02-03regenBrad Smith
2006-02-03add Intel 82372FB IDEBrad Smith
2006-02-03add Intel 82451NX (PIIX4) and 82801DBL (ICH4-L).Brad Smith
2006-02-03jump to the allmulti target in pcn_set_filter() if the IFF_ALLMULTI flagBrad Smith
2006-02-03regenBrad Smith
2006-02-02add a bunch of vendor id's and device id'sBrad Smith
2006-02-02make an exposed printf for debugging a debug printf and add a few commasBrad Smith
2006-02-02Call bge_setmulti() if IFF_ALLMULTI is set.Brad Smith
2006-02-02Optimize bge_rxeof() & bge_txeof(): return immediately if there are no packetsBrad Smith
2006-02-02Use alternate PCI DMA control register settings for PCI Express-basedBrad Smith
2006-02-01remove return values in this comment too.Brad Smith
2006-02-01fix comments.Brad Smith
2006-02-01double semicolon; from Daniel Matic in PR 4929Otto Moerbeek
2006-02-01dont clutter up dmesg with useless or redundant informationDavid Gwynne
2006-02-01a driver for the phillips pcf8584 i2c controller as found on the sun netraDavid Gwynne
2006-02-01Add support for VIA VT6410.Jonathan Gray
2006-02-01rearrange code section for enabling the read DMA state machineBrad Smith
2006-02-01one less magic value.Brad Smith
2006-02-01Set up the PCI DMA control register properly for the 5714 family,Brad Smith
2006-02-01some more constants.Brad Smith
2006-01-31regenBrad Smith
2006-01-31add a few more Promise SATA chipsets.Brad Smith
2006-01-31regenBrad Smith
2006-01-31some of these bridges are actually provided by the HT-2000 for additionalBrad Smith
2006-01-31regenBrad Smith
2006-01-31add ATI ES1000 and ServerWorks HT-1000 PCI/PCIX/PCIE bridges, LPC andBrad Smith
2006-01-31Don't use RYEL as error indicator in T1 ESF mode. For some reason it togglesClaudio Jeker
2006-01-31fix error messageDamien Miller
2006-01-30Add basic radiotap support. Modelled somewhat afterJonathan Gray
2006-01-30only flush the TX descriptors in re_start() if there are packetsBrad Smith
2006-01-30reduce the timeout waiting for command completions from 5 seconds to .1David Gwynne
2006-01-29remove printf on ath_cardbus_power; reyk@ ok.Federico G. Schwindt
2006-01-29regenBrad Smith
2006-01-29add VT6410 IDE PCI id.Brad Smith
2006-01-29Disable iic whenever ipmi is enabled. This fixes boxes like Sun x4200 thatMarco Peereboom
2006-01-29re-enable scatter and fix scanning of 802.11a channels.Damien Bergamini
2006-01-29Don't probe address 0x4f.Mark Kettenis
2006-01-29Use usbd_clear_endpoint_stall_async() when clearing endpoint stalls inBrad Smith
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 08:36:22 +0000