summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2006-02-26Print only MHz. Idea from jsg@Marco Peereboom
2006-02-26Delete some debug printing that wasn't compiling.Marco Peereboom
2006-02-26Print ACPI cpu name during dmesg as well.Marco Peereboom
2006-02-26Add acpicpu as a device.Marco Peereboom
2006-02-26Print core frequency and power usage during dmesg.Marco Peereboom
2006-02-26clean up if there is a failure to attach.Brad Smith
2006-02-26Add acpicpu device. Remains disabled.Marco Peereboom
2006-02-26Add _PSS.Marco Peereboom
2006-02-26store the shutdown hook pointer in the softc struct.Brad Smith
2006-02-26vic(4) is PCI only so make it look like a typical PCI only driver.Brad Smith
2006-02-26- set baud rate in ixgb_update_link_status().Brad Smith
2006-02-25add vic(4) config glue. The driver is not yet enabled.Reyk Floeter
2006-02-25Add vic(4), a driver for the VMware vmxnet network interface. This isReyk Floeter
2006-02-25Ugh, missed some { }Marco Peereboom
2006-02-25Make sure we print something for unidentified devices.Mark Kettenis
2006-02-25#undef I2C_VERBOSE; re-enable after release.Mark Kettenis
2006-02-25syncDamien Bergamini
2006-02-25ids for intel pro/wireless 3945ABGDamien Bergamini
2006-02-25comment code that is currently unused (radar detection and dynamic rxDamien Bergamini
2006-02-25instead of panicing when tx rate is zero, fallback to 1Mbps.Damien Bergamini
2006-02-25load the firmware only when necessary (first call to rt2661_init or if theDamien Bergamini
2006-02-24Make the "ring buffer overrun" message a DEBUG message insteadBrad Smith
2006-02-24Make ServerWorks SATA less chatty. Sprinkle some KNF while I'm there.Mark Kettenis
2006-02-24Extend temperature lookup table for a wider range and provide aAlexander Yurchenko
2006-02-24update link status here.Brad Smith
2006-02-24check for M_PKTHDR.Brad Smith
2006-02-24regenBrad Smith
2006-02-24add the Envy24 I/O CtrlrBrad Smith
2006-02-24regenBrad Smith
2006-02-24add IC Ensemble and the Envy24 Audio controllerBrad Smith
2006-02-24regenBrad Smith
2006-02-24fix the orderBrad Smith
2006-02-24regenBrad Smith
2006-02-24add a PCI id for Dell PERC 4e/Di and 4e/Si adapters.Brad Smith
2006-02-24remove NetBSD headersBrad Smith
2006-02-24remove NetBSD rnd(4) code.Brad Smith
2006-02-24clear the powerdown mode that Windows will put bce chips intoBrad Smith
2006-02-24add TTTech MC322Brad Smith
2006-02-24use some define's for the PCI ids and add another ICP Vortex PCI id.Brad Smith
2006-02-23Pre-parsing PCI address for opregionJordan Hargrave
2006-02-23remove dead function.Marco Peereboom
2006-02-23regenBrad Smith
2006-02-23add another ICP Vortex PCI id.Brad Smith
2006-02-22Print out all tables it found during autoconf. We'll need this data inMarco Peereboom
2006-02-22fix nfe_txeof() to reset the wathdog timeout only when a full tx frameDamien Bergamini
2006-02-22Make dmesg less verbose.Marco Peereboom
2006-02-22Fix size in snprintf() call; previous value turned out to be correct by luck.Miod Vallat
2006-02-22Added parsing of SSDT tablesJordan Hargrave
2006-02-22Added new aml_register to notify by device idJordan Hargrave
2006-02-22Added new aml_register_notify to handle call-by-IDJordan Hargrave