summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2006-07-11Do not fiddle with the io/mem space enable bits in the PCI command/statusMark Kettenis
2006-07-11Read PCI command/status register right before modifying it to prevent restoringMark Kettenis
2006-07-11Compile out syncops support unless option WSDISPLAY_COMPAT_USLMiod Vallat
2006-07-11put CRC error message under GEM_DEBUG. this just spews out like crazyBrad Smith
2006-07-10in pciide_mapregs_compat() explicitly enable PCI IO, then remove all theTheo de Raadt
2006-07-10print the frequency in mhz, really.Federico G. Schwindt
2006-07-10remove ifdef __OtherBSD__. no binary changeDavid Gwynne
2006-07-10add code for the interrupt holdoff support. bump NS_IHR_DELAY above 0 toBrad Smith
2006-07-10Fully initialize the softc structure before enabling interrupt.Brad Smith
2006-07-10Fully initialize the softc structure before enabling interrupt. ok brad@Dale Rahn
2006-07-09get rid of some ifdef __otherbsd__ goo. no binary changeDavid Gwynne
2006-07-09remove dead codeDavid Gwynne
2006-07-09regenBrad Smith
2006-07-09add the QLogic ISP2322 PCI id.Brad Smith
2006-07-09I don't think we're talking about animals in here, soMichael Knudsen
2006-07-09Some more KNF stuff I missed.Michael Knudsen
2006-07-09ANSI and KNF. No binary change.Michael Knudsen
2006-07-09*enty->*ently where applicableMiod Vallat
2006-07-09In ne2000_detect(), temporarily mark the dp8390 subpart as inactive, so thatMiod Vallat
2006-07-09spacingDavid Gwynne
2006-07-09enabling interrupts doesnt deserve an XXX. i think we want to do that.David Gwynne
2006-07-09implement firmware upload. this frees up memory on some controllers so theyDavid Gwynne
2006-07-09missed a bit of the fw upload stuffDavid Gwynne
2006-07-09regenBrad Smith
2006-07-09add the JMicron JMB368 PCI product id.Brad Smith
2006-07-08uncomment call to ste_miibus_statchg in ste_stats_update.Brad Smith
2006-07-08regenBrad Smith
2006-07-08revert the addition of the second 21152 PCI bridge id. I reseated the adapterBrad Smith
2006-07-08regenBrad Smith
2006-07-08The 82870P2 PCI-PCI bridge is a PCI-X bridge and add a second 21152 PCIBrad Smith
2006-07-08regenBrad Smith
2006-07-08Add Topic Semiconductor OUI and a few IC Plus 10/100 and 10/100/1000 PHY models.Brad Smith
2006-07-08add the ATI IXP300 SATA PCI id.Brad Smith
2006-07-08regenBrad Smith
2006-07-08add the ATI IXP300 SATA PCI id.Brad Smith
2006-07-08don't add 1000Mbps media types for a 10/100 only PHY.Brad Smith
2006-07-08print the chipset revision too.Brad Smith
2006-07-08shorten dmesg entry from two lines to one.Brad Smith
2006-07-08tulip_pci_(probe/attach) -> tulip_(probe/attach)Brad Smith
2006-07-08remove splnet from attach routine.Brad Smith
2006-07-07RegenPedro Martelletto
2006-07-07Add Microdia, okay miod@Pedro Martelletto
2006-07-07Broadcom HT-1000 SATA no longer requires IDE_PCI_CLASS_OVERRIDE now thatBrad Smith
2006-07-07use nested if-else to eliminate the need for a second polling printf,Brad Smith
2006-07-07Sync up to Intel's latest FreeBSD em driver (6.0.5). Adds supportBrad Smith
2006-07-07Check for SATA and RAID subclasses if we have a matching PCI ID.Jonathan Gray
2006-07-06acquiration -> acquisition (so that eyes stop bleeding)Miod Vallat
2006-07-06get rid of the unused sgl types (and the XXX on the one we actually doDavid Gwynne
2006-07-06fix debugging stuffDavid Gwynne
2006-07-06after walking the attached devices and running ppr against them, then fetchDavid Gwynne
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 21:31:20 +0000