summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2014-10-08add support for megaraid 3008 (fury) and 3108 (invader) cards. theDavid Gwynne
2014-10-08On ThinkPads, protect code handling the hibernate button withDavid Coppa
2014-10-08regenDavid Gwynne
2014-10-08new megaraidsDavid Gwynne
2014-10-08Remove the i830/i845 pipe A force quirks, matching changesJonathan Gray
2014-10-07remove preliminary AOE (ata over ethernet) support. not finished afterTed Unangst
2014-10-07zap duplicated line; Theo BuehlerStuart Henderson
2014-10-05Only synchronize used TRBs and not the full ring when sending a controlMartin Pieuchot
2014-10-05Do not mark the pipe as halted when the HC reports a (split) transactionMartin Pieuchot
2014-10-05Do not re-establish the default pipe twice for every controller. MoveMartin Pieuchot
2014-10-05Quirk needed by the Archos 24y Vision, from Max Fillinger.Martin Pieuchot
2014-10-05regenMartin Pieuchot
2014-10-05Add vendor and product for the Archos 24y Vision, from Max Fillinger.Martin Pieuchot
2014-10-05two more events found on thinkpad yogaTheo de Raadt
2014-10-04- Recognize the Yukon Prime and Yukon Optima 2 chipsets.Brad Smith
2014-10-04Wait until a read control transfer is really completed before passingMartin Pieuchot
2014-10-04replace mutexes to serialise the operations on the flag that restrictsDavid Gwynne
2014-10-04syncTheo de Raadt
2014-10-04more nvidia; from Seth JacksonTheo de Raadt
2014-10-03regenBrad Smith
2014-10-03Add Atheros E2200 and Marvell Yukon 88E8079.Brad Smith
2014-10-03refill the rx ring in myx_rxeof, not much later at the end of myx_intr.David Gwynne
2014-10-03in rxeof, instead of taking the biglock on every packet to call bpfDavid Gwynne
2014-10-03we dont need the kernel lock to call bus_dmamap_load and unload thanksDavid Gwynne
2014-10-03dont need to hold the kernel lock to call MCLGETI and m_freem now.David Gwynne
2014-10-03dont take the kernel lock on every interrupt in case we might changeDavid Gwynne
2014-10-01Check that the speed of a new device does not exceed its parent's speedMartin Pieuchot
2014-09-30Fix another Ricoh SD controller which needs to be put into slow mode to work.Stefan Sperling
2014-09-30Add support for "physical devices". Tested on:Mark Kettenis
2014-09-30prevent dmesg spam from some new windows-only keys found on very newPeter Hessler
2014-09-29correctly decrement the C_SCSIXFER reference count in wdc_xfer flagsDavid Gwynne
2014-09-27retire Accoom Networks Artery T1/E1 drive; ok claudioTheo de Raadt
2014-09-27add some more sdtemp devicesJonathan Gray
2014-09-26Don't mask off revision bits for tests against a fullJonathan Gray
2014-09-26new ricoh controllers must also be pushed into "old slow mode" at resumeTheo de Raadt
2014-09-26Revert a part of r1.98 if_run.c which caused a regression on older genMike Larkin
2014-09-26Fix format signednessPhilip Guenther
2014-09-26Rework piglet and pig allocation. Currently the piglet gets allocatedMark Kettenis
2014-09-25Bring back rev 1.249. Now that mp_setperf() has been fixed, it should beMark Kettenis
2014-09-25include bpfilter.h so the softc will be the same size in all filesJonathan Gray
2014-09-24fix the build when DRMDEBUG is definedJonathan Gray
2014-09-24Kill two generic DVACT_DEACTIVATE handlers since this event is nowMartin Pieuchot
2014-09-24Replace a few malloc() calls with reallocarray() so it checks for overflow.Doug Hogan
2014-09-23Enable MSI support.Brad Smith
2014-09-23Release the acpi lock around calls to wsdisplay_suspend() andMark Kettenis
2014-09-23add Bay Trail and Braswell SMBusJonathan Gray
2014-09-23regenJonathan Gray
2014-09-23add Bay Trail and Braswell SMBusJonathan Gray
2014-09-23Fix high capacity (> 2GB) eMMC support.Raphael Graf
2014-09-23Make use of the red-black tree as the original Linux code did insteadJonathan Gray