summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2006-10-27udcf(4) degraded the sensor status from OK to WARNING on the first receiptionMarc Balmer
2006-10-27regenBrad Smith
2006-10-27add the NVIDIA GeForce 6100 nForce 430 and some more MCP61 devices.Brad Smith
2006-10-26Set Rx early threshold and Tx DMA thesholds.Brad Smith
2006-10-26Fix this by commiting the proper revision of the bge_encap() diff.Brad Smith
2006-10-26bge_encap():Brad Smith
2006-10-26fix fxp(4) so that it will reset the link when you change the speed... ThisBrad Smith
2006-10-26Move from a switch based baud rate selection to range checkingJonathan Gray
2006-10-26Driver for MosChip MCS7703 based USB Serial devices.Jonathan Gray
2006-10-26regenJonathan Gray
2006-10-26MosChip serial & EthernetJonathan Gray
2006-10-26do the minimal initialization of the firmware so that ASF alwaysBrad Smith
2006-10-25Don't convert buffer/field output to integerJordan Hargrave
2006-10-25added deref/index for integer typesJordan Hargrave
2006-10-25Resort some functions, tiny cleanup.Marcus Glocker
2006-10-25Ooops, forgot to add radio mtap includes.Marcus Glocker
2006-10-25replace a few more instances of hand rolled code with theBrad Smith
2006-10-24Condense get functions into a single function. This is ahead of retrievingMarco Peereboom
2006-10-24remove useless chunks of code that do nothing, since endian adjustmentsBrad Smith
2006-10-24KNFMarco Peereboom
2006-10-24Work around PR 5268 by printing "bad string" instead of panicing. There isMarco Peereboom
2006-10-24Fix RX DMA handling; until now the card stopped receiving interruptsMarcus Glocker
2006-10-24Added stack trace to aml_die+acpidebugJordan Hargrave
2006-10-24Fix indentation to not imply, that USB_ATTACH_ERROR_RETURNMoritz Jodeit
2006-10-23- remove the TODO comments at the top.Brad Smith
2006-10-23Reduced memory allocations for temporary valuesJordan Hargrave
2006-10-23remove detach() function. this is not hotplug and this is dead code.Damien Bergamini
2006-10-23make sure wpi_iter_func() is called at splnet.Damien Bergamini
2006-10-23simplify zyd_read_eeprom().Damien Bergamini
2006-10-23turn link led off when returning to the S_INIT state.Damien Bergamini
2006-10-23use the Sundance TC9021 ids. this was done so that stge(4) will attachBrad Smith
2006-10-23regenBrad Smith
2006-10-23add the Sundance TC9021 PCI ids.Brad Smith
2006-10-22fetch the name of the cd device attached to the atapiscsi scsibus byDavid Gwynne
2006-10-22strncpy -> strlcpyDavid Gwynne
2006-10-22Set Jumbo frame settings for Jumbo capable bge(4) adapters.Brad Smith
2006-10-22recognize the BCM5715 A3 chipset.Brad Smith
2006-10-22regenBrad Smith
2006-10-22add the ASPEED Technology vendor id, AST2000 product id and an NVIDIA MCP55Brad Smith
2006-10-22DMA memory for the TX ring should be aligned at RL_RING_ALIGN,Brad Smith
2006-10-22now with the right revision of this diff which compiles. ok pedro, mglocker.Brad Smith
2006-10-22make data LED blink upon TX.Damien Bergamini
2006-10-22make sure ni->ni_txrate is always initialized to a meaningful value byDamien Bergamini
2006-10-22replace rssadapt(9) with amrr for automatic rate control.Damien Bergamini
2006-10-22do per-node rate control.Damien Bergamini
2006-10-22Check that ni->ni_rates.rs_nrates is not greater than sizeof rs.rates inDamien Bergamini
2006-10-22oops, the eventnotify stuff was accidentally enabled with the scsiconfDavid Gwynne
2006-10-22Activate RX radiotap. We have RSSI for now.Marcus Glocker
2006-10-21does not compileTheo de Raadt
2006-10-21Fix RX handling; the chip injects control data in front and betweenMarcus Glocker