| Age | Commit message (Expand) | Author |
|---|
| 2007-10-10 | regen | David Gwynne |
| 2007-10-10 | add the pci product id for the Mellanox ConnectX EN adapters. | David Gwynne |
| 2007-10-10 | regen | David Gwynne |
| 2007-10-10 | add the mellanox vendor id | David Gwynne |
| 2007-10-09 | malloc+bzero -> malloc+M_ZERO. Use 'malloc(sizeof(*p) ...' idiom. | Kenneth R Westerback |
| 2007-10-09 | malloc+memset(,0,) -> malloc+M_ZERO. 'Fixes' not zeroing of all | Kenneth R Westerback |
| 2007-10-09 | Ops, forgot debug printf. | Marcus Glocker |
| 2007-10-09 | Setup channels with OFDM flags. Permit user to set fix rates. | Marcus Glocker |
| 2007-10-09 | MALLOC -> malloc | Gilles Chehade |
| 2007-10-09 | we have been knocking out i2c when ipmi exists on a machine (because | Theo de Raadt |
| 2007-10-09 | Load the firmware files just one time per device lifecycle (attach time) | Marcus Glocker |
| 2007-10-09 | Use %zu for printing size_t values. | Ray Lai |
| 2007-10-08 | Give the device a bit time to finish the reset when stopped. Avoids | Marcus Glocker |
| 2007-10-08 | Make pcmcia malo(4) work with trunk(4) by: | Marcus Glocker |
| 2007-10-08 | GPS170 -> GPS170PCI | Marc Balmer |
| 2007-10-08 | regen | Marc Balmer |
| 2007-10-08 | GPS170 -> GPS170PCI | Marc Balmer |
| 2007-10-08 | Print registered/CAS latency information for SDRAM. | Jonathan Gray |
| 2007-10-08 | To identity PC133 we need to check cycle time as modules | Jonathan Gray |
| 2007-10-08 | Correct frequency for SDRAM. | Jonathan Gray |
| 2007-10-08 | More simple memset(,0,) -> M_ZERO changes. In this batch move to | Kenneth R Westerback |
| 2007-10-08 | Don't skip EEPROMs in ofw i2c scan, | Jonathan Gray |
| 2007-10-08 | attach uslcom to the track systems traqmate | joshua stein |
| 2007-10-08 | support 230400 speed | joshua stein |
| 2007-10-08 | Indicate if the module is registered, DDR/DDR2 only at the moment. | Jonathan Gray |
| 2007-10-07 | regen | joshua stein |
| 2007-10-07 | track systems traqmate gps data acquisition system | joshua stein |
| 2007-10-07 | Add a driver, amdpcib(4), for the AMD 8111 series LPC bridge and HPET written | Marc Balmer |
| 2007-10-07 | Print CAS latency for DDR/DDR2. | Jonathan Gray |
| 2007-10-07 | Port of Nicolas Joly, Paul Goyette & Tobias Nygren's | Jonathan Gray |
| 2007-10-07 | add support for scanning the spdmem range of addresses, using a different | Theo de Raadt |
| 2007-10-06 | Simpliest memset(,0,) -> M_ZERO changes. One (caddr *) cast removal, | Kenneth R Westerback |
| 2007-10-06 | Another NPBFILTER comment typo. | Jonathan Gray |
| 2007-10-06 | NPBFILTER -> NBPFILTER in comments. | Jonathan Gray |
| 2007-10-06 | Oops, committed this with a typo, which made it do not quite the right thing. | Mark Kettenis |
| 2007-10-06 | Rename bus_space macros. ISA_GET/PUT -> CSR_READ/WRITE | Brad Smith |
| 2007-10-06 | Oops. Forgot to do FREE -> free when I did MALLOC -> malloc. | Kenneth R Westerback |
| 2007-10-05 | gilles missed one of the __attribute__((__packed__)) here in | Jonathan Gray |
| 2007-10-05 | Disable fiber/copper auto-selection on the 88E1111 if it is in RGMII mode, to | Mark Kettenis |
| 2007-10-05 | The Acer TravelMate 3010 (ALC883) has a couple of gpio pins that need | Deanna Phillips |
| 2007-10-04 | attribute packed -> __packed | Gilles Chehade |
| 2007-10-04 | attribute packed -> __packed | Gilles Chehade |
| 2007-10-04 | Import the bwi single firmware-file builder / extractor before we forget | Marcus Glocker |
| 2007-10-04 | Since we know the firmware load works, merge the single firmware files | Marcus Glocker |
| 2007-10-04 | g/c ETHER_CRC_LEN. | Brad Smith |
| 2007-10-04 | Remove renaming of fields with #define. | Brad Smith |
| 2007-10-03 | add two new audio ioctls, AUDIO_GETPRINFO and AUDIO_GETRRINFO, and the | Jacob Meuser |
| 2007-10-03 | MALLOC+bzero -> malloc+M_ZERO. | Kenneth R Westerback |
| 2007-10-02 | add initial support for the Marvell PCIe Yukon FE+ Fast Ethernet chipsets. | Brad Smith |
| 2007-10-02 | In vr_attach() only touch the VR_STICKHW register if the adapter | Brad Smith |
