| Age | Commit message (Expand) | Author |
|---|
| 2015-06-22 | Flush out another small diff to reduce the diffs with Linux. | Mark Kettenis |
| 2015-06-22 | Do not update frame lengths to reflect what has really been transfered | Martin Pieuchot |
| 2015-06-22 | Make xhci(4)'s root hub report the same status bits as physical USB3 hubs. | Martin Pieuchot |
| 2015-06-22 | Apparently some BIOSes not supporting xHCI natively switch USB ports | Martin Pieuchot |
| 2015-06-21 | Don't use uninitialized data as a return value. | Kenneth R Westerback |
| 2015-06-21 | Don't leak mem if wsfont_rotate() fails. | Jeremie Courreges-Anglas |
| 2015-06-21 | memory leak on failure; from Maxime Villard | Theo de Raadt |
| 2015-06-20 | Only match devices with a valid configuration. | Martin Pieuchot |
| 2015-06-19 | Only match devices with a valid configuration. | uaa |
| 2015-06-19 | remove isp(4) now that the ql* family have replaced it | Jonathan Matthew |
| 2015-06-18 | For unsupported sample formats, don't return EINVAL but set the closest | Christian Weisgerber |
| 2015-06-18 | CP2110 is handled by uslhcom not uslcom | Jonathan Gray |
| 2015-06-18 | Only match devices with a valid configuration. | Martin Pieuchot |
| 2015-06-18 | Only match devices with a valid configuration. | Martin Pieuchot |
| 2015-06-18 | Only match devices with a valid configuration. | Martin Pieuchot |
| 2015-06-17 | when no fingers are down, send 0 for z | Joshua Stein |
| 2015-06-17 | fix compilation with UBCMTP_DEBUG | Joshua Stein |
| 2015-06-17 | Four new sensors, from David Higgs. | Martin Pieuchot |
| 2015-06-16 | Add a uslcom id for the Netgear M7100 console from Andrew Daugherity. | Jonathan Gray |
| 2015-06-16 | regen | Jonathan Gray |
| 2015-06-16 | Add a uslcom id for the Netgear M7100 console from Andrew Daugherity. | Jonathan Gray |
| 2015-06-15 | Bring back r1.78 and r1.79, now that ajactouto@'s regression has | Martin Pieuchot |
| 2015-06-15 | Set the length of isochronous transfers as the sum of the frames lengths. | Martin Pieuchot |
| 2015-06-15 | Remove comments referring to Linux iwlwifi source filenames from iwm(4). | Stefan Sperling |
| 2015-06-15 | Make the wifi LED work with iwm(4). | Stefan Sperling |
| 2015-06-14 | Implement IQ calibration support for rtwn(4). Lots of black magic involved. | Stefan Sperling |
| 2015-06-13 | Parse _CST objects and use the C-states they describe when they're sane. | Philip Guenther |
| 2015-06-13 | Busy-wait a short while after sending a command to rtwn(4) firmware. | Stefan Sperling |
| 2015-06-12 | Only match devices with a valid configuration. | Martin Pieuchot |
| 2015-06-12 | Actually trigger iwm_init_task() from iwm_watchdog() as intended to give | Stefan Sperling |
| 2015-06-12 | Fix rtwn(4) wifi LED support. Tested with rtwn(4) device in Thinkpad X220. | Stefan Sperling |
| 2015-06-11 | remove uneeded pci includes | Jonathan Gray |
| 2015-06-10 | Typos: equalivant, fucntion, libary. | Miod Vallat |
| 2015-06-10 | Don't claim the autri(4) driver supports big-ending, signed 8-bit, | Alexandre Ratchov |
| 2015-06-10 | Use first 4 channels of the board. The previous channel setting | Alexandre Ratchov |
| 2015-06-10 | Do not set "rcvif", if_input() does it for us. | Martin Pieuchot |
| 2015-06-08 | rearrange delayed_work to avoid the use of container_of while leaving it in | Jonathan Matthew |
| 2015-06-08 | pms(4): Don't match Elantech v4 devices with firmware versions 0xX7XXXX. | Stefan Sperling |
| 2015-06-08 | refuse to do polled isochronous transfers, as other usb controller drivers do | Jonathan Matthew |
| 2015-06-08 | Ensure polled bulk, control and interrupt transfers actually poll, fixing | Jonathan Matthew |
| 2015-06-07 | The Swiss Federal Government decided to shut down HBG at the end of 2011. | Claudio Jeker |
| 2015-06-07 | mark the usb hci driver pci glue code as only needed by the pci attachment, | David Gwynne |
| 2015-06-05 | regen | Stefan Sperling |
| 2015-06-05 | Add another PCI ID for Intel Dual Band Wireless AC 3165. From brad. | Stefan Sperling |
| 2015-06-04 | attach rtwn at pci | Stefan Sperling |
| 2015-06-04 | New rtwn(4) driver for RTL8188CE wifi cards. | Stefan Sperling |
| 2015-06-04 | sync | Theo de Raadt |
| 2015-06-04 | + REALTEK RT8191SE | Theo de Raadt |
| 2015-06-04 | Add support for em(4) on Teak 3020, a Tolopai (EP80579) | Dariusz Swiderski |
| 2015-06-04 | regen | Dariusz Swiderski |
