summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2006-09-19add missing sys/device.h.Brad Smith
2006-09-19detect the newer single chip generations AR2413, AR5413 and AR5224 butReyk Floeter
2006-09-19"pure g" is a special, non-standard ofdm-only mode. use the standardReyk Floeter
2006-09-19better mode setup in the ar5211 and ar5212 reset functionsReyk Floeter
2006-09-19syncReyk Floeter
2006-09-19add atheros AR2413 and AR5413 device idsReyk Floeter
2006-09-19fix 11a/b antenna mode setupReyk Floeter
2006-09-19use the correct antenna mode settings and fix a bug in the txReyk Floeter
2006-09-19disable 11g mode for nowReyk Floeter
2006-09-19fix all malloc()s to nowait|canfail and do not ignore errors reading sensor s...Michael Shalayeff
2006-09-19no externs on protots ad no casts from void *Michael Shalayeff
2006-09-19add a missing space to a DMA load error printf.Brad Smith
2006-09-18Fix for re_stop() being called from re_cardbus_shutdown() with theDimitry Andric
2006-09-18fix my 1.7 commit.Damien Bergamini
2006-09-18better uath_set_rates().Damien Bergamini
2006-09-18cleanup the list of supported devices.Damien Bergamini
2006-09-18don't use IF_PREPEND() on altq's.Damien Bergamini
2006-09-18macros and types for event notifications from the hardware.David Gwynne
2006-09-18tiny whitespace nitDavid Gwynne
2006-09-18get rid of the usb_port.h macros that wrap our kthread create functions.David Gwynne
2006-09-18regenGordon Willem Klok
2006-09-18Add some pci device types for Integrated Micro Solutions.Gordon Willem Klok
2006-09-18g/c unused SK_{SET,CLR}BIT macrosBrad Smith
2006-09-18There's no need to walk the list of devices to find the SCSI bus wePedro Martelletto
2006-09-18regenBrad Smith
2006-09-18add entries for unknown Marvell SATA and ServerWorks IDE PCI ids.Brad Smith
2006-09-18regenBrad Smith
2006-09-18- fix typo in Corollary vendor nameBrad Smith
2006-09-18More uath devices, also properly mark some of the UB52/AR5005UX devicesJonathan Gray
2006-09-18regenJonathan Gray
2006-09-18More uath devices.Jonathan Gray
2006-09-17add a flag to indicate which boards are only capable of 10/100 modes ofBrad Smith
2006-09-17Readd the Dell PHY LED setup workaround and the Jumbo capability flag.Brad Smith
2006-09-17Try to reclaim the TX descriptors in the watchdog handler before actuallyBrad Smith
2006-09-17Overhaul RX path to recover from mbuf cluster allocation failure.Brad Smith
2006-09-17do not fill in the anar for the manual 1000baseT media setting case.Brad Smith
2006-09-17Move get ipmi id into the match function. This prevents attach from beingMarco Peereboom
2006-09-17Re-add the link state check to re_start(), which was added in rev 1.31 andBrad Smith
2006-09-17set the IFCAP_VLAN_MTU flag.Brad Smith
2006-09-17revert revision 1.131, the code in question was later found to not ensureBrad Smith
2006-09-17- correct the firmware synchronization in bge_reset(), thisBrad Smith
2006-09-17defer establishing the interrupt until later during attach, to let theBrad Smith
2006-09-16add new uath(4) ids and fix existing ones.Damien Bergamini
2006-09-16sync (uath)Damien Bergamini
2006-09-16add new uath(4) ids and fix existing ones.Damien Bergamini
2006-09-16sync (uath)Damien Bergamini
2006-09-16more uath(4) usb ids.Damien Bergamini
2006-09-16indentDamien Bergamini
2006-09-16fix a buggy printf.Damien Bergamini
2006-09-16sync (uath)Damien Bergamini