summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2006-11-23Do not attach second port on dual port cards for now.Mark Kettenis
2006-11-23Set some more power management bits; makes Yukon-2 XL work somewhat.Mark Kettenis
2006-11-23The duration field is calculated by the firmware. Remove malo_txtime()Marcus Glocker
2006-11-23OpenBSD-ify the HW VLAN tag insertion code.Brad Smith
2006-11-22add the BCM4312 PCI id.Brad Smith
2006-11-22style(9): remove variables names from prototypes.Damien Bergamini
2006-11-22Remove rssadapt(9) bits; Firmware supports rate adaption. Also,Marcus Glocker
2006-11-22don't write to BBP before it is ready and fully initializedDamien Bergamini
2006-11-22Some more minor cleanup in the PCI hookup.Marcus Glocker
2006-11-22From Jon Simola <jon@mecha.ca>:Marcus Glocker
2006-11-21Fail wi_get_txpower() on USB wi(4), so that we don't CSR_READ on them.Miod Vallat
2006-11-21Free allocated mbufs at TX done. While there also reset some TX descriptorMarcus Glocker
2006-11-21fix dmesg printing for the artisea chipset.Brad Smith
2006-11-21From Jon Simola <simola@mecha.com>:Marcus Glocker
2006-11-21Remove watchdog handler workaround introduced in rev 1.149 which is noBrad Smith
2006-11-21style changes. no op.Brad Smith
2006-11-20Re-enable HW VLAN tagging.Brad Smith
2006-11-20set the IFCAP_VLAN_HWTAGGING capabilities flag.Brad Smith
2006-11-20Added 2nd pass for interrupt override scanningJordan Hargrave
2006-11-20Fix register number definitions.Mark Kettenis
2006-11-20only try to do HW checksum offload for TCP and UDP.Brad Smith
2006-11-20Due to an incorrect macro, it appears that the driver has always beenBrad Smith
2006-11-20Add support for LM63.Mark Kettenis
2006-11-19Re-enable the Intel i31244 support now that real hardware actually exists.Brad Smith
2006-11-19some additional registers for the Artisea chipset operating in DPA mode.Brad Smith
2006-11-19In bnx_start, check the used_tx_bd count rather than the descriptorsBrad Smith
2006-11-19regenBrad Smith
2006-11-19add the Broadcom BCM4312 PCI id.Brad Smith
2006-11-19restore the workaround for rate==0 bug.Damien Bergamini
2006-11-19Probe for National Semiconductor LM63.Mark Kettenis
2006-11-19Probe for Myson MTP008.Mark Kettenis
2006-11-19Add PCI hookup for malo(4).Marcus Glocker
2006-11-18Remove some useless variables/code dealing with cardbus BARsAlexander Yurchenko
2006-11-18ixgb_get_buf():Brad Smith
2006-11-18add a few commentsBrad Smith
2006-11-18fix commentsBrad Smith
2006-11-18- set descriptor DMA addresses before enabling TX and RXBrad Smith
2006-11-17Minor cleanup.Marcus Glocker
2006-11-17KNFMarcus Glocker
2006-11-17Remove code that deals with sk(4) specific phy's that breaks certain msk(4)Mark Kettenis
2006-11-17This is a very initial import for a driver which supports the IEEE 802.11Marcus Glocker
2006-11-17syncTheo de Raadt
2006-11-17usb hub found on ibm x3455; Srebrenko SehicTheo de Raadt
2006-11-17Add a lower TX threshold value and use this when checking the number ofBrad Smith
2006-11-16syncTheo de Raadt
2006-11-16another cdceTheo de Raadt
2006-11-16Drop malo_reset() for now and do ENETRESET and media changes usingMarcus Glocker
2006-11-16add support for 4 new radios: AL2210, CGT, Maxim New, Maxim New2Damien Bergamini
2006-11-16Minor cleanup; reactivate malo_cmd_reset() which seems to work now, removeMarcus Glocker
2006-11-16have SK_IS_YUKON only match for first generation Yukon chipsets.Brad Smith
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 07:00:53 +0000