| Age | Commit message (Expand) | Author |
|---|
| 2006-08-28 | properly detect failed drives and do not crash bioctl; krw@ testing | Michael Shalayeff |
| 2006-08-28 | Fix manual media types by always leaving the PHY in autoneg mode but adjusting | Brad Smith |
| 2006-08-28 | bzero() the sensor memory after allocating it. | Kenneth R Westerback |
| 2006-08-28 | set error and break -- not return an error before spl is set back in ioctl! f... | Michael Shalayeff |
| 2006-08-28 | add a BGE_JUMBO flag. | Brad Smith |
| 2006-08-28 | turns out the volume info contains a bitmap of failed physdisks in it, so | David Gwynne |
| 2006-08-28 | Dell PCI vendor subid. | Brad Smith |
| 2006-08-28 | Set the BGE_NO3LED flag to properly adjust the PHY LED mode if attaching | Brad Smith |
| 2006-08-27 | display proper volume device name in the volume line (; krw@ testing | Michael Shalayeff |
| 2006-08-27 | it works a little better like this. | Brad Smith |
| 2006-08-27 | pack several boolean fields into the existing bge_flags field. | Brad Smith |
| 2006-08-27 | basic monitoring and management support. there are a few more things to fix b... | Michael Shalayeff |
| 2006-08-27 | sigh, this is annoying. it appears that the arc firmware doesnt care if a | David Gwynne |
| 2006-08-27 | try to get the status of the volume out of the arc firmware and into | David Gwynne |
| 2006-08-27 | if a disk dissapears out of a raidset, then the raid info will list its id | David Gwynne |
| 2006-08-27 | little nit | David Gwynne |
| 2006-08-26 | Remove ifdef/ifndef __OpenBSD__ maze so only what we use is left. | Jonathan Gray |
| 2006-08-26 | Cleanup. Add config flag to make fans blast at full speed. | Mark Kettenis |
| 2006-08-25 | update for the Triware to 3ware renaming and use pci_matchbyid(). | Brad Smith |
| 2006-08-25 | regen | Brad Smith |
| 2006-08-25 | - rename TRIWARE to 3WARE | Brad Smith |
| 2006-08-25 | Disable interrupts during the attach of UHCI and EHCI controllers. If | Christopher Pascoe |
| 2006-08-25 | fill in the controllers name in the inq ioctl. spotted by deraadt@ | David Gwynne |
| 2006-08-25 | don't need to clear if_timer during attach. | Brad Smith |
| 2006-08-25 | only write to the RMAC_CFG_KEY register for the Xframe chipset. | Brad Smith |
| 2006-08-25 | Allow the driver to compile with MSK_DEBUG. | Brad Smith |
| 2006-08-24 | Add some first PCI glue. | Marcus Glocker |
| 2006-08-24 | s/IEEE80211_MTU_MAX/IEEE80211_MAX_LEN/ in my previous commit. | Damien Bergamini |
| 2006-08-24 | dont print debug output when the scsi completion path returns with | David Gwynne |
| 2006-08-24 | show the firmware revision of the disks. | David Gwynne |
| 2006-08-24 | report the size of the disks and volumes correctly. | David Gwynne |
| 2006-08-24 | Be sure to print device name in debug messages, remove | Jonathan Gray |
| 2006-08-24 | when shutting down, wrap the variable manipulation in splusb() so weird | Jason Wright |
| 2006-08-24 | too much copy and paste. report raid 1 correctly. | David Gwynne |
| 2006-08-24 | ignore passthru volumes, struct bioc_vol isnt smart enough to know what | David Gwynne |
| 2006-08-24 | figure out the raid level of the volume. | David Gwynne |
| 2006-08-24 | oops, im unlocking too often | David Gwynne |
| 2006-08-24 | a start at the BIOC INQ, VOL, and DISK ioctls for fetching information | David Gwynne |
| 2006-08-24 | regen | Gordon Willem Klok |
| 2006-08-24 | Add vendor "miro computer products AG" and device MiroVIEDO DC20 plus | Gordon Willem Klok |
| 2006-08-24 | regen | Brad Smith |
| 2006-08-24 | add the Epson Perfection 1670 and Stylus CX3650. | Brad Smith |
| 2006-08-23 | - fall back to 1Mbps if tx rate is returned as zero. avoids divide by zero. ... | Niall O'Higgins |
| 2006-08-23 | Protect scsi_done() with splbio(), discussed with and okay dlg@, marco@ | Pedro Martelletto |
| 2006-08-23 | the maximum MTU allowed for IEEE802.11 is 2290 which is greater than | Damien Bergamini |
| 2006-08-23 | in rum_rxeof(), don't check xfer length against IEEE80211_MIN_LEN since | Damien Bergamini |
| 2006-08-23 | regen | Brad Smith |
| 2006-08-23 | add SiS 191 Gig Ethernet PCI id. | Brad Smith |
| 2006-08-23 | Add Nova Tech NV-902W, and mention another Zinwell ural(4) device. | Jonathan Gray |
| 2006-08-23 | regen | Jonathan Gray |
