summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2007-03-20Fake out target id for bioc_disk.Marco Peereboom
2007-03-20Use queue.h macros instead of home made for thingy.Marco Peereboom
2007-03-19Only call bus_dmamap_unload() if we loaded a dmamap beforehand. Found outClaudio Jeker
2007-03-19the autoconf glue funcs (match/attach/etc) are only used inside softraid.c,David Gwynne
2007-03-19Fix keyword expansion.Michael Knudsen
2007-03-19attach softraid to the root of the device tree in a machine independantDavid Gwynne
2007-03-19Add a new device that provides a framework for IO manipulation. A very basicMarco Peereboom
2007-03-19Fix some code relative to chips that don't currently work (BCM5722 &Kenneth R Westerback
2007-03-18Define MMC_STOP_TRANSMISSION command (CMD12)Uwe Stuehler
2007-03-18DHC automatically sends a CMD12 after multiple-block transfers, but otherUwe Stuehler
2007-03-18Support the PXA27x SD/SDIO/MMC controller on ZaurusUwe Stuehler
2007-03-18Backout pascoe@'s last USB change because it page faults at attachmentMarcus Glocker
2007-03-18OX16PCI954K is a puc@cardbus (missed in the previous puc@cardbus commits)Michael Shalayeff
2007-03-18add OX16PCI954K puc idMichael Shalayeff
2007-03-18Comment routine which does the chip access validation.Marcus Glocker
2007-03-18o Add bcw_80211_core_init() according toMarcus Glocker
2007-03-18Perform legacy emulation handover for USB1 companion controllers immediatelyChristopher Pascoe
2007-03-18Wait the stable power delay on a USB hub only once per hub (not per port),Christopher Pascoe
2007-03-18Save SOF (frame timing adjustment) before the very first host controllerChristopher Pascoe
2007-03-18syncReyk Floeter
2007-03-18add device IDs of the new VIA CX700 chipsetReyk Floeter
2007-03-17replace the VMWARE quirk that restricts the bus width to 16 targets withDavid Gwynne
2007-03-17add uts(4); this was missing from the initial commitRobert Nagy
2007-03-17regenJonathan Gray
2007-03-17Add some more NVIDIA graphics cards.Jonathan Gray
2007-03-16Split the whole chip init stuff in bcw_init() into a new functionMarcus Glocker
2007-03-16uts(4) is a driver for USB Touchscreens;Robert Nagy
2007-03-16Add missing "goto fail;" in an error path of fxp_attach().Claudio Jeker
2007-03-16Cleanup prototypes.Marcus Glocker
2007-03-16Remove a lot of dead code and nonexisting registers. This stuff was mostlyMarcus Glocker
2007-03-16Better (constant) register naming.Marcus Glocker
2007-03-16Split the beacon returned by ieee80211_beacon_alloc() in two parts andClaudio Jeker
2007-03-16First super massive register cleanup run; group/sort registers,Marcus Glocker
2007-03-16A new PCI id for Intel's PCIe quad port fiber adapter.Reyk Floeter
2007-03-15syncReyk Floeter
2007-03-15add Intel PCI-E quad port fiber device IDReyk Floeter
2007-03-15Set chip operation mode in the init path. Add first bits to enableMarcus Glocker
2007-03-15Since p_flag is often manipulated in interrupts and without biglockArtur Grabowski
2007-03-15regenJonathan Gray
2007-03-15commit the correct version this timeJonathan Gray
2007-03-15Add a few different things found in submitted dmesgs.Jonathan Gray
2007-03-15regenJonathan Gray
2007-03-15JMB368 has no SATA.Jonathan Gray
2007-03-14Call ifp->if_start() at the end of the rx interrupt handling just in caseClaudio Jeker
2007-03-14In HostAP mode, ieee80211_input() will enqueue packets in if_snd withoutClaudio Jeker
2007-03-13Drop the second and third arguments to adb_op_sync, for they are not used;Miod Vallat
2007-03-13When about to run X11 in 32 bpp mode, advertize correctly that we areMiod Vallat
2007-03-13regenRobert Nagy
2007-03-13Add ITM Touchscreen from Future Technology DevicesRobert Nagy
2007-03-13we need a resid tooDavid Gwynne
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 09:29:03 +0000