| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2001-04-17 | No colon after "address" when printing out Ethernet address. | Aaron Campbell | |
| 2001-04-17 | Implement cnbell(), an optional entrypoint that rings the console bell; from | Aaron Campbell | |
| NetBSD. deraadt@ ok | |||
| 2001-04-17 | add support for the 82562E[MT] phys (These are essentially 82555's will | Jason Wright | |
| all support for T4 gone). There are some register definition conflicts (SCR), but that is qualified by the presence of T4 support. | |||
| 2001-04-16 | Don't remove the mouse cursor when output occurs on a virtual terminal different | jbm | |
| from the current one. | |||
| 2001-04-16 | incorrect return value from ami_intr | Theo de Raadt | |
| 2001-04-16 | fix header | Theo de Raadt | |
| 2001-04-16 | put yamaha comment in the file | Theo de Raadt | |
| 2001-04-16 | dmesg cleanups | Theo de Raadt | |
| 2001-04-16 | Avoid resetting the interface when not needed; allows temporary WEP keys | Thorsten Lockert | |
| to work. ALso optimize some interactions with the card. Fixes rest of PR 1754; ok deraadt@ | |||
| 2001-04-15 | - in txp_intr(), don't call the rx/tx handlers unless necessary | Jason Wright | |
| - make txp_rx_reclaim() run on offsets instead of indices (avoids several division/multiplication conversions) - remove vlan tag support for now (it doesn't work anyway) - optimize txp_start(), txp_rx_reclaim(), and txp_tx_reclaim() a bit (this is based on my original attempts at these functions... only now it works =) | |||
| 2001-04-15 | mask off Arm2Host_Comm_3 interrupts now that rx buffer reclamation has | Jason Wright | |
| some out of resource handling (a2h_3 is a heartbeat generated every ~8ms and thus provides 125intrs/sec even when idle). | |||
| 2001-04-15 | - setup a timeout that will try to refill the rxbuffer ring (this makes | Jason Wright | |
| out of resource handling a bit better). - in txp_stop(), disable the rx process, too | |||
| 2001-04-15 | another | Theo de Raadt | |
| 2001-04-15 | Support U160 on 53c1010 chips. | Kenneth R Westerback | |
| Add support for PPR negotiations and DT transfers, and the preservation and restoration of the SCNTL4 register which controls Ultra3 transfers. Redo sync lookup, since the same period factor can mean two things depending on whether you are using DT or ST. Keep a minimum allowed ST period factor, and a minimum allowd DT period factor for each adapter. Currently NO support for QAS or IUS or AIP. | |||
| 2001-04-14 | - integrated phy on the natsemi 83815 (MacPhyter) is essentially a nsphyter | Jason Wright | |
| (media selection doesn't work completely right... choose what ever you want, you get auto, but at least link and speed detection work correctly) - correct the cfdriver name to be "nsphyter" not "nsphy" so it can be distinguished from nsphy in 'boot -c'. | |||
| 2001-04-14 | oops, really sync.. i have no idea what happened here | Aaron Campbell | |
| 2001-04-14 | sync | Aaron Campbell | |
| 2001-04-14 | Use [a-f] for hex digits, not [A-F]. Also fix some tab/space issues. | Aaron Campbell | |
| 2001-04-14 | KNF | Aaron Campbell | |
| 2001-04-14 | Remove non-portable sysbeep calls; deraadt@ | Aaron Campbell | |
| 2001-04-14 | quieten this on OpenBSD, information available in ifconfig -m is not needed ↵ | Theo de Raadt | |
| in dmesg | |||
| 2001-04-14 | Remove some static. | Aaron Campbell | |
| 2001-04-14 | Kernel support for console mouse functionality which will be controlled by | Aaron Campbell | |
| the wsmoused daemon (replacement for moused which was used with PCVT). Adds a "getchar" method to the display drivers which returns the value of the character currently under the cursor (e.g., so it may be inversed). From jbm@. Still needs a bit of cleanup and improvement, especially X cohabitation features. The pointer moves to fast as well. These sorts of issues will be corrected in-tree. | |||
| 2001-04-14 | Instead of using KBC_AUXTEST, probe the aux port with KBC_AUXECHO, which is | Aaron Campbell | |
| what Linux does; from NetBSD. This apparently fixes problems with old chipsets that handle the test command differently, leading to a non-working keyboard. This patch was tested by many people successfully. | |||
| 2001-04-14 | Add an lxtphy_reset function; from NetBSD. Tested on a NewMedia LiveWire | Aaron Campbell | |
| 10/100 PCMCIA Ethernet card. | |||
| 2001-04-14 | Remove defopt; aaron@ ok. | Federico G. Schwindt | |
| 2001-04-13 | - attempt to get dma coherent buffers for most of the shared memory uses | Jason Wright | |
| - correct rx_reclaim (still needs some work) - rework txp_init() a bit to do the operations in the right order - wait for filter setup to complete before returning | |||
| 2001-04-13 | - rx buffer ring management (working) | Jason Wright | |
| - simplify/encapsulate fully transmit ring handling - initialize sc_xcvr to be auto - initial rx descriptor ring handling (doesn't work yet) status: firmware, boot, media, tx, and rx buffer management work (actual received frames don't... yet). | |||
| 2001-04-13 | Define RL_USEIOSPACE in the PCI bus piece, not the common piece; thanks jason@ | Aaron Campbell | |
| 2001-04-13 | Oops, remove an unrelated debugging #if 0. | Aaron Campbell | |
| 2001-04-13 | Disestablish the shutdownhook on detach. | Aaron Campbell | |
| 2001-04-13 | and again. | Brad Smith | |
| 2001-04-13 | these files are supposed to be regenerated after pcidevs has been commited | Brad Smith | |
| so that the correct RCS id is at the top. | |||
| 2001-04-13 | Pull in (correct) support for LIVENGOOD fibre cards (some register locations | mjacob | |
| changed between Wiseman && Livengood. Pull in support for the LIVENGOOD with a PHY (82543_CU) that supports 10/100/1000- this is the Intel PRO1000T. This depends on the Marvell phy support in mii. Do a bunch of ansification. Attempt to *still* keep the OpenBSD printf stuff sane, but this area needs some more cleanup. It'd probably be best to fork the OpenBSD code away from NetBSD. | |||
| 2001-04-13 | Add support for the Marvell PHY that's on the Intel GigE cards. | mjacob | |
| 2001-04-13 | Be more explicit about the Intel GigE cards. | mjacob | |
| 2001-04-12 | - initial rx buffer ring management routines and allocation | Jason Wright | |
| - go ahead and initialized the rx filter (but don't enable RX just yet) - correct descriptor definition for txp_rx_desc (not the same size as any other descriptor) - definition of txp_rxbuf_desc | |||
| 2001-04-12 | - complete rewrite of transmit routines (these really work, but need | Jason Wright | |
| optimization) - add in IFF_OACTIVE and if_timer handling status: firmware, boot, media, and transmit working | |||
| 2001-04-12 | Replace delay(1) with an alpha_mb() since it just makes more sense. ok art@ | Nathan Binkert | |
| 2001-04-12 | - sort of working transmit routines and tx interrupt handling, definately | Jason Wright | |
| more to do here - be sure to set maximum packet size early - remove old debugging code and add new | |||
| 2001-04-12 | Call isa_malloc with drq < 4, in case 8-bit DMA channels with more | Constantine Sapuntzakis | |
| restrictive boundaries are used | |||
| 2001-04-12 | The old code was broken and always allocated for a 16-bit DMA channel, | Constantine Sapuntzakis | |
| which has different alignment restrictions than the 8-bit DMA channel. Fix from NetBSD. | |||
| 2001-04-12 | print phy model at startup | Theo de Raadt | |
| 2001-04-11 | correct descriptor definitions for tx and frag | Jason Wright | |
| (also fix CMD/RSP type fields) | |||
| 2001-04-11 | just fail if there are no volumes defined | Michael Shalayeff | |
| 2001-04-11 | make this load the linux style image file as distributed on 3com's | Jason Wright | |
| website. The license is still too restrictive to be in the tree, though. | |||
| 2001-04-11 | driver for BCM5201/5202 PHY | Theo de Raadt | |
| 2001-04-11 | BCM5401/5411 support | Theo de Raadt | |
| 2001-04-11 | sync | Theo de Raadt | |
| 2001-04-11 | other broadcom gigabit models | Theo de Raadt | |
 |
index : src | |
| OpenBSD base system |
| summaryrefslogtreecommitdiff |