summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2007-05-01shuffle some code and add additional states in the reset path. use aReyk Floeter
2007-05-01do not write every byte of the firmware to the same address, incrementReyk Floeter
2007-05-01Missing braces in vge_tick(). Fixes link state announcements.Can Erkin Acar
2007-05-01regenJonathan Gray
2007-05-01VIA P4M890 ids from Graeme Lee <graeme@omni.net.au>Jonathan Gray
2007-05-01fix some register offsetsReyk Floeter
2007-05-01implement the soft reset of the hardware according to section 3.5.6 ofReyk Floeter
2007-04-30better handling of the firmware state madnessReyk Floeter
2007-04-30fix shift by portReyk Floeter
2007-04-30run the nx_tick function every second to check the link state, even ifReyk Floeter
2007-04-30read the per-port link stateReyk Floeter
2007-04-30initial code for firmware loading and initialization. it is used byReyk Floeter
2007-04-30add missing newline in printfReyk Floeter
2007-04-30decrease the delay in the register wait loop again and add a debugReyk Floeter
2007-04-30move the firmware validation to a mountroot hook to allow loading ofReyk Floeter
2007-04-30';;' doesnt work on older gcc..Todd T. Fries
2007-04-30Replace another expansion of DISKLABELDEV with the define itself.Kenneth R Westerback
2007-04-30fix dmesg; ok dlgTheo de Raadt
2007-04-29MCDUNIT/etc -> DISKUNIT/etc. No change to mcd.o.Kenneth R Westerback
2007-04-29missing arguments in a couple of printfs.David Gwynne
2007-04-29Replace expansions of DISKLABELDEV() with DISKLABELDEV(). Shorter, andKenneth R Westerback
2007-04-29Nadav Shemer of Tehuti Networks is magical.David Gwynne
2007-04-29clocks and pll register bitsDavid Gwynne
2007-04-29we dont want to completely fill fifos, so leave a gap when we calculateDavid Gwynne
2007-04-29when we post a fifo we're giving the dma mem back to the hardware, so weDavid Gwynne
2007-04-29when completing a tx pkt, put it back on the tx free list, not the rx one.David Gwynne
2007-04-29Match on ATI IXP/SB600 as well.Jonathan Gray
2007-04-29Match on VT8237A/VT8251/CX700 like the equivalent Linux driver does.Jonathan Gray
2007-04-28initialize and bootstrap the device and enable the firmwareReyk Floeter
2007-04-28spacing (cleanup the code before i leave the room)Reyk Floeter
2007-04-28attach the available ports and print the lladdr (no operation yet).Reyk Floeter
2007-04-28validate the firmware version, this driver requires 3.4.xx (3.4.31).Reyk Floeter
2007-04-28add different flags for debug messages to minimize the noise.Reyk Floeter
2007-04-28read more information from flash - get the user info field and copyReyk Floeter
2007-04-28query the board information before mapping the interrupt and beforeReyk Floeter
2007-04-28add code to access the flash memory in the ROMUSB register area andReyk Floeter
2007-04-28CCDLABELDEV/ect and RAIDLABELDEV/etc join other no-op defines in theKenneth R Westerback
2007-04-28Fix comments above DISKMINOR uses. DISKMINOR provides minor not majorKenneth R Westerback
2007-04-28missing splbio/splx pair (which splasserted me per-device probe) inTheo de Raadt
2007-04-28remove abstraction around splbio/splx; they just confuse things; ok dlg marco...Theo de Raadt
2007-04-27Even floppies should use DISKLABELDEV() on the dev_t parameter toKenneth R Westerback
2007-04-27Correct typo in comment, no code changesChad Loder
2007-04-27update a comment to reflect the truth - the documentation that isReyk Floeter
2007-04-27spacingReyk Floeter
2007-04-27registers are accessed via configurable windows in the PCI memory space,Reyk Floeter
2007-04-27also map the seconds PCI memory spaceReyk Floeter
2007-04-27sync (also update the PCI IDs in the nx driver)Reyk Floeter
2007-04-27update NetXen PCI IDsReyk Floeter
2007-04-27add initial nxb_read/nxb_write functionsReyk Floeter
2007-04-27only attach nx NICs with 128MB memory and a 32bit memory type for nowReyk Floeter
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 02:40:22 +0000