summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2007-01-04use the right variable when finding a ports register window, not one thatDavid Gwynne
2007-01-04stash the dva for each command in the ccb, and program the hardware withDavid Gwynne
2007-01-04fix up some port regs so their names are more in line with what is in theDavid Gwynne
2007-01-04allocate the dmamem that each port will need, and hopefully point ourDavid Gwynne
2007-01-04use ISSET instead of &, cos it looks cleanerDavid Gwynne
2007-01-03In sk_marv_miibus_writereg, wait for busy flag to clear instead ofMark Kettenis
2007-01-03After the firmware has been loaded to the chip, read the exact firmwareMarcus Glocker
2007-01-03M_DUP_PKTHDR() cleanup. On static mbufs M_DUP_PKTHDR() will leak mbuf tags.Claudio Jeker
2007-01-03M_DUP_PKTHDR() cleanup. On static buffers M_DUP_PKTHDR() will leak mbuf tags.Claudio Jeker
2007-01-03Rename bcw_shm_write_4() to bcw_shm_ctl_word(). We need the originalMarcus Glocker
2007-01-03also bail if sc_chipc is NULL; spotted by miodTheo de Raadt
2007-01-03mbg(4) cards with ASIC take the internal timestamp at the very moment theMarc Balmer
2007-01-03Don't say 'Marvell' twice for each sk/msk device in dmesg. No functionalKenneth R Westerback
2007-01-03Pretty printing of debug messages.Marcus Glocker
2007-01-03Don't wrap line before printing MAC address.Marcus Glocker
2007-01-03Avoid mixing of u_int* and uint* in the same code. uint* wins.Marcus Glocker
2007-01-03Replace bus_space_read_2() by the BCW_READ16 macro.Marcus Glocker
2007-01-03Replace bus_space_write_2() by the BCW_WRITE16 macro.Marcus Glocker
2007-01-03Replace bus_space_read_4() by the BCW_READ macro.Marcus Glocker
2007-01-03Replace bus_space_write_4() by the BCW_WRITE macro.Marcus Glocker
2007-01-03Oops forgot this bit as part of the cleanup for acpiac. From ConstantineMarco Peereboom
2007-01-03Spacing, comments.Marcus Glocker
2007-01-03Consistent naming for the sensors.Marco Peereboom
2007-01-03Add first shot of the firmware upload. Tested on i386 and amd64.Marcus Glocker
2007-01-03Uncomment bcw_powercontrol_crystal_off() for now because it leads toMarcus Glocker
2007-01-02syncKevin Steves
2007-01-02add Sierra Wireless Aircard 875; ok fkr@Kevin Steves
2007-01-02return is not a function.Marc Balmer
2007-01-02do not permit agp_ioctl if the methods are invalid; ok miodTheo de Raadt
2007-01-02syncKevin Steves
2007-01-02spacing and change comment for MC8755 to "MC8755 HSDPA"; ok fkr@Kevin Steves
2007-01-02Use the value returned by pci_findproduct() as the timedelta sensor descriptionMarc Balmer
2007-01-02Provide a new function, pci_findproduct(), which is analog to pci_findvendor().Marc Balmer
2007-01-02Don't use M_DUP_PKTHDR() in the driver bpf hook. Using M_DUP_PKTHDR() on aClaudio Jeker
2007-01-02regen.Marc Balmer
2007-01-02Add the Alcatel Telecom SpeedTouch 120g (WLAN adapter using pgt).Marc Balmer
2007-01-02On some systems EC must be attached as the first device. Move EC fromMarco Peereboom
2007-01-01knock UPS products out from being matched as HID devicesTheo de Raadt
2007-01-01syncTheo de Raadt
2007-01-01a few UPS products; from freebsdTheo de Raadt
2007-01-01regen.Marc Balmer
2007-01-01Add a new Intel host bridge chipsetMarc Balmer
2006-12-31Add a debug printf to warn when malo_init() fails and resets the card.Claudio Jeker
2006-12-31There is no need to busy wait in malo_send_cmd(). 0x0c14 only stores theClaudio Jeker
2006-12-31Use a bus_space_barrier instead of those stupid 0x0c14 reads to make sureClaudio Jeker
2006-12-31In malo_init() check for firmware loading errors and in case of an errorClaudio Jeker
2006-12-31malo_stop() never fails so no need to return an error. OK mglocker@Claudio Jeker
2006-12-31Use #ifdef MALO_DEBUG else a simple #define MALO_DEBUG will not work.Claudio Jeker
2006-12-31Bring last few phys into line by calling their XXX_status() functionsKenneth R Westerback
2006-12-31Bye bye unused acx_shutdown() we won't miss you.Claudio Jeker
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 05:22:18 +0000