summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Collapse)Author
2008-05-13Use the LINK_STATE_IS_UP macro when checking for the link being UP.Brad Smith
ok dlg@
2008-05-13Also report the duplex state of the connection when callingBrad Smith
if_link_state_change() which is always full duplex for tht(4). ok dlg@
2008-05-12If we find an E220 device in umass mode send the magic commandJonathan Gray
to enable the serial portions of the device. From Yojiro UO <yuo@iijlab.net>, tested by bernd@
2008-05-12Make this compile again.Mark Kettenis
2008-05-12Pass correct argument to timeout_set so that the timeout can break theCan Erkin Acar
loop as intended. ok dlg@
2008-05-12Call mii_pollstat() instead of bge_tick() in bge_link_upd() so that linkBrad Smith
state transitions are noticed and the appropriate routing socket messages are generated. ok kettenis@ krw@
2008-05-11Remove special casing of the BCM5700 B2 chipset so that this revision alsoBrad Smith
uses MII interrupts to detect link state transitions as is done for all of the other BCM5700 revisions, without this change link state transitions are not being detected at all. ok kettenis@
2008-05-11Add the Buffalo (MELCO) LUA-U2-GT id.Brad Smith
ok jsg@
2008-05-11regenBrad Smith
2008-05-11Add the USB id for the Melco (Buffalo) LUA-U2-GT Ethernet adapter.Brad Smith
From the Linux ASIX driver
2008-05-11regenBrad Smith
2008-05-11More E1000 PCI ids for ICH9 and ICH10.Brad Smith
2008-05-11Revert the last commit as this is not the proper way of fixing the issue.Brad Smith
ok krw@
2008-05-11Fix a typo with the media duplex flag being used for AUI connectionsBrad Smith
so that the status routine will properly display half duplex instead of full. ok henning@ krw@
2008-05-10On socppc, we need to be able to map a zero base address too.Mark Kettenis
2008-05-10regenMats O Jansson
2008-05-10Add some ATI entries. -mojMats O Jansson
2008-05-09- Count excess and late collisions as output errors.Brad Smith
- Count receive errors as input errors. Based on similar change to the gem(4) driver from NetBSD. ok kettenis@
2008-05-09Add support for NTT DoCoMo A2502.Jonathan Gray
From/tested by Yojiro UO <yuo@iijlab.net>
2008-05-09regenJonathan Gray
2008-05-09NTT DoCoMo A2502.Jonathan Gray
From Yojiro UO <yuo@iijlab.net>
2008-05-09Increase buffer size to 4k and make use of interrupt endpointJonathan Gray
to increase responsiveness. From Yojiro UO <yuo@iijlab.net>
2008-05-09Attempt to fix link status change handling so that the proper RTM_IFINFOKenneth R Westerback
messages are generated when links go down or come up. Works on available devices, put in tree to encourage wide testing. Enables latest dhclient changes to work their magic on bge. Feedback from brad@ ok deraadt@ beck@ reyk@
2008-05-08regenMark Kettenis
2008-05-08Add the Freescale vendor ID and some devices from the MPC8349E family.Mark Kettenis
2008-05-08regenMiod Vallat
2008-05-08Add support for yet another exotic Microsoft Mouse, this time theMiod Vallat
``Microsoft Notebook Optical Mouse 3000 Model 1049''. From FreeBSD.
2008-05-08Add support for Microsoft Wireless Intellimouse, from FreeBSD. Not only doesMiod Vallat
this device bends the uhid specs backwards, it is also completely unusable for left-handed people due to its shape. Tested on actual hardware thanks to a donation from Maxim Belooussov.
2008-05-07Rather than fixing ises(4), nuke it.Kenneth R Westerback
ok deraadt@
2008-05-07Rather than fixing ises(4), nuke it.Kenneth R Westerback
ok deraadt@
2008-05-07Rather than fixing ises(4), nuke it.Kenneth R Westerback
ok deraadt@
2008-05-06Kill vtophys in drm.Owain Ainsworth
The code we inherited from FreeBSD used vtophys is a fair few places, nuke that and replace with bus_dma. technically _DRM_SHM should be managed with uao_create(), but until we move away from mmap and into an ioctl to map, this will do. This also paves the way for amd64 support (it lacks vtophys). ok kettenis, miod looked at it a while back too.
2008-05-06currently agp_i810 needs to map the same BAR as inteldrm, this obviouslyOwain Ainsworth
fails. In order to allow this, implement an API so that drm and agp can share mappings for the BARs. Now it works as it should. tested by many. ok kettenis, miod said he'd look at it when it's in tree.
2008-05-06Add support for the Apple USB Ethernet adapter.Marco Pfatschbacher
Work around the "latch in at the first working PHY address hack", that fails for this adapter because it returns 0xffff when reading from lower PHY addresses. Also add more debugging printfs. Testing and OK jsg@
2008-05-06AMD_8111_PMC has timecounter, too; ok grange@ some time agoMarkus Friedl
2008-05-06syncMarco Pfatschbacher
2008-05-06Add Apple USB Ethernet.Marco Pfatschbacher
2008-05-06Remove bogus entries for PCI_PRODUCT_DELL_PERC_3DI_2, which apparentlyMarco Pfatschbacher
is an UART. Makes aac(4) compile again. OK dlg@
2008-05-06syncTheo de Raadt
2008-05-06someone making usb keyboards.. for oems.. owned by vladas.urbonasTheo de Raadt
2008-05-06syncTheo de Raadt
2008-05-06another omron usb that must be ugen; vladas.urbonas@gmailTheo de Raadt
2008-05-06rename file; Paul de WeerdTheo de Raadt
2008-05-05Correct defines for NXE_DB_PEGID_RX|TX. OK dlg@Claudio Jeker
2008-05-05dell drac 3 and 4 virtual uarts are pucs running very fast.David Gwynne
2008-05-05Don't set the adaptor template link's flags and quirks when trying toKenneth R Westerback
set the flags and quirks for a device. Should fix weird issues where the device after an ATAPI device gets marked as ATAPI. First reported on misc@ by Daniel Wade, who also provided some useful testing. ok dlg@
2008-05-05Make umsm only claim a single interface so it doesn't matchJonathan Gray
on umass interfaces, and add Huawei E220. From rivo nurges <rix@estpak.ee>. And add another device while here.
2008-05-05regenJonathan Gray
2008-05-05Another msm.Jonathan Gray
Reported on misc@ by Denis Doroshenko <denis.doroshenko@gmail.com>
2008-05-01correct attach messagesTheo de Raadt
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 10:52:51 +0000